Peeling Back the Onion 1.0 CEU/HSW
2025-12-18 12:30 - 13:30 (America/Detroit)
Peeling Back the Onion
This presentation is an in-depth dive into a leak investigation at a high school Industrial Arts and Horticulture Building that snowballed into a remedial architecture project and then escalated further with discoveries that raised structural red flags and created an expansion to the original scope of work. While investigating water damage, additional nonconforming conditions were uncovered and additional areas had to be opened, revealing even more questionable building practices. In the end, the structure of the south façade was replaced, as well as 1/3 of the roof structure, and the entire building was “re-skinned”. Due to the nature of the failures, this project also became a case for litigation.
This presentation is presented as a Case Study that covers the timeline of the project from the initial investigation, the layers of additional discoveries, the remedial design, and the construction process while briefly covering the litigation that followed. Throughout the timeline, each layer of the onion is pulled back for discussion, as well as to inform attendees of how each of those issues was overcome.
Learning Objectives:

Through a Case Study of a completed K-12 project, participants will examine the importance of regular on-site QA/QC observations during the construction process
Participants will discuss the importance of continuity between air and water barrier systems and how lapping and transitions between adjacent systems are often incorrectly addressed
Participants will discuss the importance of well-planned and coordinated building maintenance plans in relation to an existing real-world project.
Participants will acquire a better understanding of sequencing and constructability and how what is drawn relates to what is actually constructed.

Register Now
Nathan Taylor, CSI, CDT, Associate, Building Enclosure Consultant, DTR Consulting Services
Nathan Taylor, CSI, CDT, is an accomplished international professional with extensive architectural design and building envelope experience. He holds a Master’s degree in Architecture and Urban Planning and is highly involved in CSI. Nathan oversees the Construction Phase Services and Forensic Investigation scope of project work at DTR Consulting Services. He is an advocate for spending time on construction sites and “learning by doing”. He is passionate about drawing as a form of design communication and hosts an annual Architectural-themed drawing event each October. He and his family live in northern California and enjoy spending time outdoors. He stays actively creative by drawing and writing novels in his free time.

Designing Wall Systems for Specific Climate Zones 1.0 CEU/HSW
2025-12-18 12:30 - 13:30
Designing Wall Systems for Specific Climate Zones
Copying and pasting a wall or roof assembly that works in one part of our country into a project in another part of the country could be not just problematic, but potentially catastrophic. This presentation will use data and hygrothermal modeling to articulate what happens when tried and true assemblies from one part of the country get moved to a very different climate. More importantly, we’ll cover strategies to mitigate these issues. While many may be familiar with a Class I Vapor Retarder (“vapor barrier”) in the wrong part of an assembly, we’ll also cover the impacts of insulation type, the overreaction to perm ratings, light-colored roofing membranes, and reservoir claddings such as stucco and unit masonry.
Learning Objectives:

Learn climate-specific design strategies for durable construction.
Learn to avoid common mistakes that can lead to mold, rot, mildew, corrosion and decay.
Understand how hygrothermal modeling can be used in the design process to ensure durability.
Learn how material properties (permeability, heat capacity, density, conductivity, and porosity) impact wall assemblies.

Register Now
John Posenecker, P.E., Senior Principal And Regional Facilities Manager, Terracon Consultants, Inc.
John Posenecker is the Senior Principal and the Building Enclosure Practice Leader for Terracon Consultants, Inc. He is a registered engineer in the State of Texas and Oklahoma. His experience includes the design, construction, testing and forensic investigation of building envelope systems. Previously, he was an Estimating Manager with Chamberlin Roofing and Waterproofing from 2005 through 2015, Project Manager for Advanced Environmental Concepts from 1997 through 2005, an Engineering Team Leader at Southern Company Services from 1987 through 1997, and a Senior Engineer with Bechtel Power from 1982 to 1987.
Throughout his career, Mr. Posenecker has participated in a wide variety of projects associated with the building envelope that include containment systems for commercial nuclear power plants; noise control systems for commercial and institutional projects; and waterproofing for commercial high-rise office and multi-family buildings, medical and educational institutional projects, and large concrete structural projects. Mr. Posenecker specializes in waterproofing and cladding systems associated with the building envelope. He is an active member in several professional organizations including the National Institute of Buildings Sciences (NIBS), the American Society for Testing and Materials (ASTM), the International Concrete Restoration Institute (ICRI). He is also on the executive committee for the National Building Enclosure Council.

Kayla Maines, AIA, Senior Architect, Terracon Consultants, Inc,
Kayla Maines joined Austin Terracon-Facilities in May of 2018. She is a Registered Architect in the state of Texas and Oklahoma, Legacy LEED AP, and Building Enclosure Commissioning Provider (BECxP) and a Commissioning Authority +Building Enclosure (CxA+BE) She has 17 years of experience that includes managing projects from Schematic Design through Construction Administration, multidiscipline coordination, peer reviews, design assistance, building assessments, reviews submittals and shop drawings, performs field observations and building enclosure testing, historic preservation, and building enclosure commissioning. Kayla was the 2020 Chair of the Austin Building Enclosure Council (BEC: Austin) and currently serves as a board member for BEC: Austin. She also serves as the Secretary of the Austin Construction Specification Institute (CSI). Mrs. Maines is a Terracon Subject Matter Expert (SME) for Building Enclosure Commissioning (BECx) and an Authorized Project Review (APR).

ABAA Fellowship Committee Meeting
2025-12-18 13:00 - 14:00
Conference Call
All times shown are in Eastern Time Zones

Air Barrier Installation & Quality Control Fundamentals 1.0 CEU/HSW
2025-12-18 15:00 - 16:00
Air Barrier Installation & Quality Control Fundamentals
Join us for an informative presentation that emphasizes the importance of proper air barrier application in enhancing building performance. Properly installed air barriers are critical in preventing air leakage, which can lead to energy inefficiencies, moisture issues, and compromised indoor air quality.
We will delve into best practices for air barrier application, highlighting the techniques that ensure continuity and effectiveness. Attendees will learn about common challenges faced during installation and the vital role of quality control in maintaining the integrity of the air barrier system.
Through real-world project photo’s, we’ll illustrate key application requirements for a variety of air barrier materials and exactly what to look for when performing quality control and site-testing.
Learning Objectives:

Understand and demonstrate the essential techniques for proper air barrier installation, ensuring continuity and effectiveness in various building applications.
Identify common pitfalls and obstacles in air barrier application, and learn strategies to overcome these challenges to maintain optimal performance.
Understand the importance of quality control processes during installation, and learn specific inspection methods and testing protocols to ensure air barrier integrity.
Analyze real-world case studies to distinguish between effective and ineffective air barrier installations, understanding the long-term consequences of proper application and maintenance.

Register Now
Melissa Payne, BECxP, CxA+BE, CDT, Building Enclosure Consulting – Forensics Owner, Midwest Enclosure Consulting, LLC
Melissa I. Payne focuses on offering building enclosure third-party consulting services. She founded Midwest Enclosure Consulting, LLC September 2022, where she focuses to help clients mitigate risk and to provide building envelope solutions no matter the structure’s phase – design, construction, or operation. Ms. Payne possesses a strong foundation in industry standards related to building envelope commissioning processes, commissioning authority, building science, construction observation, performance testing, project management, and general construction of building envelope systems including institutional, schools, higher education, government, healthcare, hospitality, and industrial projects. Her owner representative, third-party consulting experience, forensic work, commissioning provider background, and manufacturer internal consultant involvement gives her an all-enveloping perspective of the design and construction industry. Currently she works with owners, architects, engineers, designers, construction managers/general contractors, and enclosure trades to promote the integrity and performance of building enclosures. She is known for bringing collaboration to the design and construction process. She focuses on bridging the gap in design and construction with design review services, development of project specific details, construction observation and documentation, and focuses on mitigating risk as they relate to the design and construction of the building enclosure system.

Continuous Insulation Compared Within Eight Steel Stud Wall Assemblies 1.0 CEU/HSW
2025-12-18 16:15 - 17:15
Continuous Insulation Compared Within Eight Steel Stud Wall Assemblies
Continuous Insulation, while required by the energy code, presents challenges integrating it with the overall wall-assembly’s design, performance and construction. This program at the intermediate to advanced level, comparatively studies eight steel-stud commercial wall assemblies with considerations including: Overview of the Assembly components, High-performance Net-Zero Energy, WUFI thermal and moisture modeling comparisons, NFPA 285 and fire-rated compliance.
Learning Objectives:

OVERVIEW OF EIGHT ASSEMBLES: Understand the rationale of the eight commercial steel stud-framed wall-assemblies and how they compare with their types of continuous and total insulation, sheathing, air, water and vapor control layers.
HIGH-PERFORMANCE, NET-ZERO ENERGY: Compare how each wall may comply or exceed the energy codes and become super-insulated to meet high-performance ASHRAE 189 requirements.
AVOID PROBLEMS: Illustrate how more insulation can present problems with trapped moisture and condensation.
WUFI: Understand how each assembly compares utilizing WUFI Hygrothermic (thermal and moisture) evaluations over four climate seasons chosen for Climate Zone 5 (due to the requirement for an interior vapor retarder).

Register Now
David Schoenhard, AIA, Manager & Principal, DSS-Philly
David Schoenhard, AIA has over 45 years’ experience in designing fine architecture, with the last nine as the Principal of DSS-Philly, one of the leading High-Performance Building Enclosure consulting firms in the Philadelphia region. He brings his decades of architectural experience to skillfully advise and design, implement or remediate building enclosures on behalf of other architects, owners and contractors. He is the inventor and developer of the high-performance Back-Lattice Wall Design. He actively researches comparative building enclosure assemblies, speaks nationally, and is an AIA Continuing Education Provider.

ABAA ASI Ad Hoc Group Meeting
2025-12-19 10:00 - 11:00, 2026-01-09 11:00 - 12:00, 2026-01-16 11:00 - 12:00, 2026-01-23 11:00 - 12:00, 2026-01-30 11:00 - 12:00, 2026-02-06 11:00 - 12:00

ABAA ExCom Meeting
2026-01-05 15:00 - 16:00

ABAA Ad Hoc Meeting - Build Out Contractor Panel Presentation: 2026 Conference
2026-01-08 11:00 - 12:00

Saddle Up! Integrating Control Layers at Parapet to Rise Walls Conditions 1.0 CEU/HSW
2026-01-08 13:00 - 14:00
Saddle Up! Integrating Control Layers at Parapet to Rise Walls Conditions
Water and air leakage, deterioration, and biological growth often occur at parapet terminations where adjacent rise walls lack proper integration of air and moisture control layers. These issues typically stem from missing or inadequate detailing, sequencing, trade coordination, and installation—compounded by limited industry standards and general lack of awareness. While most designs rely on two-dimensional details, complex roof-to-wall interfaces require multi-step, three-dimensional detailing. Proper construction sequencing, trade coordination, and mock-ups—including saddle flashing—are essential. This presentation will review design principles for integrating control layers at complex conditions and demonstrate how freehand sketches, paper folding, 3D modeling, collaboration with trades and manufacturers, and mock-ups help develop effective saddle flashing details.
Learning Objectives:

Understand the importance of critical detailing of control layers at complex conditions to avoid air and water-related problems
Learn effective ways to develop and design successful details at complex conditions that are constructable and durable
Recognize the importance of considering construction sequencing and trade coordination when developing complex details
Understand the importance of mock-ups for evaluating detailing, sequencing and performance testing to ensure water-resistant and airtight designs

Register Now
Michael Nagle, NCARB, Firmwide Quality Leader | Building Enclosures, Cannon Design
In his role as a firmwide quality leader of building enclosures, Michael Nagle leads CannonDesign’s building enclosure group, leads standard development, performs quality reviews, and develops in-house training for fellow colleagues in the area of building science fundamentals and building enclosure design. Before joining CannonDesign (a global A/E design firm) in January 2022, Michael served the industry as a building enclosure consultant while investigating many projects involving water and air leakage, condensation, and distress conditions in a variety of building enclosure systems at a leading consulting firm for nearly 20 years.

Jacob Morrison, Associate AIA, ANFA, Designer III, Cannon Design
Jake Morrison is committed to integrating technology to find creative solutions for each project’s unique challenges. At CannonDesign, he uses metrics derived from iterative modeling and simulation to inform and refine the design process to meet the different needs each client, project, and site requirement. In the last 5 years, Jake has been involved in many large scale projects serving as a building enclosure technical designer.

ABAA Contractors Committee Meeting
2026-01-12 11:00 - 12:00

ABAA Conference Committee Meeting
2026-01-13 11:00 - 12:00, 2026-02-09 11:00 - 12:00

IIBEC Chicago Area Chapter Annual Meeting
2026-01-14 08:00 - 19:00
The Chicago Area Chapter of the International Institute of Building Enclosure Consultants (CAC) will be conducting our Annual Meeting and Program on Wednesday, January 14, 2026. Agenda below.
Attendees will receive 6 IIBEC CEH and 2 AIA LU. **If you attended the “Failure is Not an Option” by Allison McSherry and Brian Mathus of K&H at the BES in October, then you are eligible for only 5 CEH**
The event will be followed by a cocktail reception and presentation of IIBEC-CAC awards.
IIBEC-Chicago Area Chapter Annual Meeting and Winter Program Agenda
Wednesday, January 14, 2026
Hyatt at 2715 Jorie Blvd, Oak Brook, IL 60523

Time
Event

7:00-8:00AM
Registration, Continental Breakfast, Table-top Exhibits, and Networking

8:00-8:15AM
Welcome, Announcements, and Table-Top Exhibitor Introductions

8:15-9:15AM
Tech Session #1: “Designing Against Wind Uplift: Best Practices for Paver and Vegetated Assemblies” by John Hamati of Eco Building Solutions

9:15-10:15AM
Tech Session #2: “Expansion Joint Complexities within Elevated Planters and Paver Plazas” by Lurita Blank and David Fortino of Raths, Raths & Johnson, Inc.

10:15-10:40AM
Mid-morning Break and Table-top Exhibits

10:40-11:40AM
Tech Session #3: “What the Heck are Air Barriers, Vapor Barriers, and Water-Resistive Barriers?” by Laverne Dalgleish of ABAA

11:40-11:50AM
CRCA Update and Trade Show by Troy Wormley of CRCA

11:50-12:00PM
IIBEC Region III Update by Charles Sietmann, Region III Director

12:00-1:00PM
Luncheon

1:00-2:00PM
Tech Session #4: “Commercial Low-slope Roof Design and Installation – 10 (Roof System) Things to Think About in 2026” by Jason Wilen of Klein & Hoffman [AIA 1.0 LU]

2:00-3:00PM
Tech Session #5: “ Rooftop & Building Envelope Ice and Snow Management” by David Dellal of Floe

3:00-3:30PM
Mid-afternoon Break and Table-top Exhibits

3:30-4:30PM
Tech Session #6: “Failure is Not an Option” by Allison McSherry and Brian Mathus of Klein & Hoffman**

4:30-4:45PM
Chapter Business

4:45-6:00PM
IIBEC-Chicago Area Chapter Awards and Cocktail Reception Sponsored by Table-Top Exhibitors

Learn More/Attend

2026 CRCA Trade Show & Seminars
2026-01-14 10:00 - 2026-01-16 17:00
2026 CRCA TRADE SHOW & SEMINARS SCHEDULE
WEDNESDAY, JANUARY 14:

​5 pm – Roofing Week in Chicago: Kick-off Cocktail Party at the Hilton Suites (Requires Advance Registration)

THURSDAY, JANUARY 15:

11 am – 5 pm Trade Show Exhibitor Hours
9 – 11 am – CRCA’s Roofing Week in Chicago Keynote Breakfast: State of the Industry: Key Legal and Policy Issues Affecting Contractors (Trent Cotney, Adams & Reese LLP) ($60 per member, $90 per non-member – $30 to Roof Consultants, Code Officials, and Specifiers/Architects – Requires Advance Registration)
12 – 1 pm – What the Heck are Air Barriers, Vapor Barriers, and Water Resistive Barriers?(Laverne Dalgleish, Air Barrier Association of America)
1:30 – 2:30 pm – I Wouldn’t Do That If I Were You (Matt Dupuis, SRI Consultants)
3 – 4 pm – Growing a Sales Team (Ben Christiansen, GAF Materials Corporation)

FRIDAY, JANUARY 16:

9 am – 1 pm Trade Show Exhibitor Hours
7 – 9 am – Safety Leadership & Soft Skills for a Resilient Workplace (Frank Marino, Safety Check)
9:30 – 10:30 am – Case Law Update: Lessons and Legal Insights for Contractors (Trent Cotney, Adams & Reese LLP)
11:30 am – 12:30 pm – Low Slope Technical Update (Mark Graham, NRCA)

Learn more/Attend

Navigating the Complexities of Expansion Joint System Installation for Stadium Construction 1.0 CEU/HSW
2026-01-15 13:00 - 14:00
Navigating the Complexities of Expansion Joint System Installation for Stadium Construction
The installation of expansion joint systems in stadium construction presents unique challenges due to the structural demands and operational requirements of these large-scale venues. This presentation will explore the technical intricacies associated with planning, coordinating, and executing expansion joint system installations with particular emphasis on the critical role of effective interfacing with various substrates and the extensive logistical coordination required for a seamless, water-tight installation. Key discussion points will include the process of ensuring proper preparation and alignment with various substrates, which are often subject to irregularities and environmental conditions that could impact the performance and longevity of the joint systems. This presentation will reference a confidential new NFL stadium on the East Coast and analyze the importance of pre-installation assessment, surface preparation, and substrate compatibility in addressing and/or minimizing issues that could lead to system failure or compromised system integrity.
Learning Objectives:

Identify the Role and Importance of Expansion Joint Systems in Large-Scale Stadium Projects
Examine Best Practices for Interfacing Expansion Joints with Concrete Substrates
Analyze Logistical and Sequencing Challenges in Expansion Joint Installation
Identify Common Types of Expansion Joint Materials and Installation Challenges

Register Now
Jack Belanger, Vice President, MTN Inc.
Jack Belanger is a Vice President for MTN Inc., a national Division-7 waterproofing and specialty contractor. Jack brings over 20 years of experience in commercial construction ranging from maintaining and extending useful lives of new commercial buildings and structures to performing restoration aspects of commercial structures while utilizing leading technologies to ensure building envelope continuity. Jack is proficient in various technologies including below-grade waterproofing systems, expansion joint systems, above-grade air/vapor barriers, joint sealants, commercial roofing systems, traffic coatings, epoxy coatings, and hot- and cold- applied waterproofing.

ABAA Board of Directors Meeting
2026-01-16 10:00 - 11:00

ABAA QAP Committee Meeting
2026-01-16 14:00 - 15:00

Air Barrier Embodied Carbon: A Critical Review 1.0 CEU/HSW
2026-01-22 13:00 - 14:00
Air Barrier Embodied Carbon: A Critical Review
The session will start with a review of embodied carbon impacts applied to air barriers. This will include a comparison of published air barrier embodied carbon values, varying assessment methodologies, and their limitations. A recommended approach of evaluating embodied carbon impacts based on clear field and linear/point impacts similar to modern thermal performance analysis will be presented. The impacts of this approach will be illustrated using example building envelope assemblies. A number of common project air barrier considerations will be discussed including: the use of membranes under exterior spray foam applications, the use of liquid applied air barriers on masonry when applying interior fibrous insulation, and the use of loose sheet vs liquid applied or self-adhered air barriers. This session will be of interest to a range of participants: manufacturer’s will be interested in the review of environmental product declarations (EPDs) and how it may affect their systems; professionals will be interested in the insights and approaches offered and application to their practices in selecting systems and reporting embodied carbon impacts. The session be a great targeted introduction for contractors and others in the industry with an interest in embodied carbon applications to their field of work.
Learning Objectives:

Identify the embodied carbon impact stage for air barrier
Determine Clear Field vs Linear Impacts
Illustrate the impact of air barrier on the embodied carbon of building envelope assemblies
Identify the impacts of common air barrier strategy selections

Register Now
Dr. Randy Van Straaten, PhD, P.Eng, President, Building Science Specialist, Building Enclosure Labs, Inc
Dr. Randy Van Straaten is the President and a Building Science Specialist at Building Enclosure Labs Inc. (BELi) in London, Ontario. Previously, Randy worked at RDH Building Science, where he managed their life cycle analysis services. Randy recently completed a life cycle assessment study for BC Housing and has been lecturing on sustainability, with a focus on operating and embodied carbon of building envelopes. He recently taught Building Science for Retrofits at George Brown College and Building Performance at Toronto Metropolitan University.

Online Self-Adhered & Fluid Applied Installer Certification Training Course
2026-01-27 10:00 - 2026-01-29 16:30
DEADLINE TO REGISTER IS FRIDAY, JANUARY 9, 2026
Download Registration Form
Online ABAA Training course
Physical installer manuals will be sent out. Those who register early will have a better chance of receiving their manual prior to the start of training. Having the manual for the online training modules is not required, but highly recommended to have before writing the exam.

DESCRIPTION:
This course is designed to teach experienced installers how to create an Air Barrier using Self-Adhered and Fluid Applied materials. This course includes instruction on everything from selecting proper materials, substrate preparation, application technology and troubleshooting.
More Information

Not an Installer?
ABAA courses are open to everyone and are a great training opportunity for all, including General Contractors, Suppliers, Manufacturers sales rep, Architectural Reps, and anyone in the construction industry. There is NO experience needed to attend one of our great training courses.

Interested in Certification?
Self-Adhered and Fluid Applied installer training is designed to teach experienced installers how to create an Air Barrier using Self Adhered and Fluid Applied materials. This course includes instruction on everything from selecting proper materials, substrate preparation, application technology, troubleshooting and hands-on training.
For certification purposes, a minimum of 3000 hours of work experience either directly with air barriers or in applicable related trade experience is required.
For companies seeking to become ABAA Accredited Contractor, it is ABAA policy that each company has at least 1 person trained in an ABAA Installer Training Course and certified as an ABAA Level 3 Installer, and at least 1 person trained in the Quality Assurance Program Administrator Course.

Questions?
Please email us at training@airbarrier.org
See you there!
Download Registration Form
COURSE BEGINS TUESDAY, JANUARY 27, 2026 AT 10:00AM ET. IF YOU DO NOT RECEIVE A CONFIRMATION EMAIL WITHIN 3 BUSINESS DAYS OF REGISTERING, PLEASE CONTACT US DIRECTLY.
DEADLINE TO REGISTER IS FRIDAY, JANUARY 9, 2026

ABAA Contractor Webinar: Mock Ups - The "Crash Test Dummy" for Building Enclosure
2026-01-28 11:00 - 12:00
This presentation will review why enclosures are critical for energy efficiency, sustainability and durability, and explain how every building is unique. We will then review and discuss the advantages/disadvantages of the various types of mock ups, using examples from actual projects, along with discussing various industry performance tests and standards typically performed on Functional or tested mock ups.
The last part of the presentation will review and provide ideas on how to take the Lessons Learned from the mock and use that information as an on-site training for the tradesmen whom will be installing the enclosure for that project.
This webinar is exclusive to the ABAA contractor members. Please reach out to lhardman@airbarrier.org to register.

Dispelling the Myths about Building Enclosure Warranties 1.5 CEU/HSW
2026-01-29 13:00 - 14:30
Dispelling the Myths about Building Enclosure Warranties
Building Envelope System Warranties are becoming more sought after and bring some real value to a building owner – they help manage risk and obtain peace of mind. What constitutes a building enclosure system warranty? Can such a warranty be attained under one umbrella of coverage? Our industry understands how critical it is to ensure building enclosure protection from water, air, and thermal intrusion, at every level, and at every transition, but is our industry ready for shift in practices to make this a reality for building owners? In a world aiming to minimize financial exposure, system warranties are a good option. But are they really that simple to specify and implement? Join us to learn more about building enclosure system warranties, the value they bring, what they are, how to specify them, and what to look out for during the build process.
Learning Objectives:

Explain the scale and causes of building enclosure failures as a billion-dollar annual issue and describe why performance specifications – defining performance, functional, and technical requirements – are essential to reducing these failures.
Identify and interpret key contract terms, conditions, and warranties, and analyze how they assign responsibilities among parties and outline remedies in cases of claims or breaches.
Differentiate between full system warranties, component warranties, and workmanship warranties, and evaluate how full building envelope warranties align with Building Code compliance and the performance expectations of components that are moderately difficult to access or replace.
Distinguish the coverage terms of various whole building envelope warranties and apply this understanding to appropriately incorporate warranty requirements into project specifications

Register Now
Melissa Payne, BECxP, CxA+BE, CDT, Owner, Midwest Enclosure Consulting, LLC
Melissa I. Payne is the founder of Midwest Enclosure Consulting (est. 2022), providing third-party building enclosure consulting, forensic investigations, performance assessments, and onsite inspections. She previously led Tremco CPG’s Enclosure System Solutions Team and administered the MyTEAM Leak-Free Warranty program, and before that managed building enclosure commissioning and consulting services at Miller Engineering after serving as an Owner’s Representative for City Utilities of Springfield.With broad experience in building science, commissioning, construction observation, and detail development across multiple building types, Ms. Payne is known for improving collaboration and reducing risk in design and construction. A nationally recognized speaker, she is an active member of SWMO-CSI, ICC, NIBS, BEC-OR (Past Chair), BETEC, ABAA, and IIBEC, and is a published author in Interface magazine.

Corey Zussman, AIA, NCARB, ALA, CABS, QA/QC Vice President, AECOM Hunt
As a forensic architect registered in several states, Corey Zussman has practiced in the construction industry for more than 30 years. He specializes in the building envelope, restoration, preservation, life safety, and interior finishes. While working on over 2000 projects, Corey conducts constructability reviews, pre-installation meetings, comprehensive envelope meetings, and construction observations. He has also become known for providing educational opportunities throughout the industry and has produced more than 200 “lessons learned” papers. Topics include building envelope and life safety concerns, enabling Corey to proactively address issues during design review, pre-construction, and construction. In addition, he has over 15 industry articles about building envelope, life safety, and interior topics. He is also a frequent presenter at local and national conferences and associations with over 60 AIA accredited presentations.

Amy Baker, AIA, LEED AP, Specifications Writer, Amy Baker Architect
Amy Baker is a Registered Architect and Specifications Consultant with over 20 years of experience in commercial construction. She specializes in the technical development of projects with a passion for enclosure detailing, building science, codes, and specifications. Amy is pleased to serve on the Board of Directors for the Building Enclosure Council (BEC-GD), the Detroit Chapter of the Construction Specifications Institute (CSI), Specification Consultants in Independent Practice (SCIP), and the Air Barrier Association of America (ABAA). She is also on RIB SpecLink’s Product Innovation Advisory Board, where she contributes ideas for improving the functionality of one of the leading spec writing platforms in North America. Amy holds two degrees from Lawrence Technological University, where she has been recognized as the university’s 26th Distinguished Architecture Award Recipient.

Taking the Air (Barrier) Out of ASHRAE 90.1 - with a Taste of MN Hotdish 1.0 CEU/HSW
2026-02-05 13:00 - 14:00
Taking the Air (Barrier) Out of ASHRAE 90.1 – with a Taste of MN Hotdish
The 2021 International Energy Conservation Code (IECC) adopted ASHRAE Standard 90.1-2019, which includes mandatory requirements for air barriers. This session will explore key topics such as Whole-Building Air Leakage and Continuous Air Barrier Design and Installation—both essential components of the compliance path. Our speaker, Pam Jergenson from Minnesota, will guide attendees on the pathway through the air barrier provisions in ASHRAE 90.1-2019 and highlight Minnesota-specific amendments that may resemble your local code. And since it’s at the lunch hour, we’ll serve up those code insights with a side of cozy Minnesota hotdish flavor!
Learning Objectives:

Know the starting point and path through ASHRAE Standard 90.1-2019 for air barrier materials and systems during the design and construction phases.
Understand specific Minnesota amendments to the air barrier part of the standard, their impact, and what could be in your code.
Know Section 5, Building Envelope; specifically, the Compliance Paths, Mandatory Provisions, Submittals, Products, and Inspection and Verification for air barriers.
Analyze 5.4.3.1.1, Whole-Building Air Leakage, describing the Exceptions and the Minnesota amendment to the Exceptions that may be similar to your region.

Register Now
Pamela Jergenson, FCSI, CDT, CCS, CCCA, BECxP, CxA+BE, CABS, Technical Director of Building Science Solutions, Intertek
Ms. Jergenson is a Technical Director of Building Science Solutions at Intertek. Pam is a Certified Construction Specifier (CCS) and Certified Construction Contract Administrator (CCCA) from Construction Specifications Institute (CSI), Building Enclosure Commissioning Process Provider (BECxP) and Accredited Commissioning Authority + Building Enclosure (CxA+BE) from University of Wisconsin-Madison, ABAA Licensed Field Auditor and Certified Speaker with Air Barrier Association of America (ABAA), and Advanced Communicator Gold and Advanced Leader Bronze with Toastmasters International. She has over 35 years in construction with nearly 30 years in investigation, survey, design, construction observation, and construction contract administration of new and existing building enclosure projects; with expertise in exterior walls.

ABAA & AIA/BEC San Antonio Lunchtime CE
2026-02-11 12:30 - 15:15
ABAA in partnership with BEC San Antonio
Earn up to 2.0 LU/HSW
Register Here
Program Agenda
11:30 AM – 12:00 PM
Registration, Sign-In & Welcome
12:00 PM – 1:00 PM
Building Enclosure Pre-Construction Meetings
Presenter: Brian Stroik
1.0 LU/HSW
Pre-construction meetings are a critical component of effective quality assurance and should be clearly specified in the project manual. These meetings align owners, designers, contractors, and manufacturers on performance expectations, installation practices, sequencing, and warranty requirements before work begins. This session outlines how to structure effective pre-construction meetings to identify and resolve issues early, encourage collaboration, and reduce risk, delays, and construction-related failures.
1:00 PM – 1:15 PM
Break
1:15 PM – 2:15 PM
Through-Wall Flashings & Transition Membranes: Selection and Installation
Presenter: Craig Wetmore
1.0 LU/HSW
Effective water management depends on the proper integration of through-wall flashings with air barriers, weather-resistive barriers, and insulation systems. This session reviews common flashing types, material compatibility considerations, and key installation principles required to ensure continuity and drainage. Real-world project examples will highlight best practices for durable, high-performing transitions.
2:15 PM
Wrap-Up & Adjournment
Registration Fees:

AIA, Associate AIA Members: $15
Non-members: $25

Venue:
AIA San Antonio
1344 S. Flores Street
San Antonio, TX 78204

ABAA Contractors Committee Meeting (CXLD)
2026-02-11 15:00 - 16:00

Building Enclosures Durability Analysis with Hygrothermal Modeling 1.0 CEU/HSW
2026-02-12 13:00 - 14:00
Building Enclosures Durability Analysis with Hygrothermal Modeling
Hygrothermal modeling, the analysis of heat and moisture transport through building enclosure assemblies, reveals many of the climate-specific building science secrets that are key to durable design of walls and roofs and other assemblies. Debunking rules of thumb and avoiding answers of “it depends” – data and analysis can reveal exactly how many inches of a certain insulation are required, exactly what perm-rating will optimize an assembly, and what kind of havoc a reservoir cladding system can create. Case studies will be shown that demonstrate when perm rating matters and when it does not, the impact of roof membrane color and the risks of “cool roofing,” and when HT (high-temp) rated membranes are actually required.
Learning Objectives:

Learn climate-specific design strategies for durable construction.
Learn to avoid common mistakes that can lead to mold, rot, mildew, corrosion and decay.
Understand how hygrothermal modeling can be used in the design process to ensure durability.
Learn how material properties (permeability, heat capacity, density, conductivity, and porosity) impact wall assemblies.

Register Now
Keith Simon, FAIA, CPHC, BECxP, CxA+BE, LEED AP, CEI, VP, Design Phase Services, Salas O’Brien
An expert in building enclosure technology, Keith Simon addresses the critical and often unmet need for ensuring and improving building performance, resilience, and durability by guiding design teams, educating future architects, and facilitating interdisciplinary exchange. With more than 20 years of experience in the industry, Keith is Vice President of Design Phase Services at Salas O’Brien. Additionally, he serves as the Chair and Founder of the Austin Building Enclosure Council, Vice Chair of the NIBS Building Enclosure Technology and Environment Council (BETEC), Scholarships Chair for the Society of Building Science Educators (SBSE) and has been adjunct faculty at the University of Texas School of Architecture since 2011.
