ABAA Contractor Webinar: Pre-and Post Installed Balconies and Canopies Open Forum
2026-04-29 11:00 - 12:00 (America/Detroit)
Adam Ugliuzza, Partner of the Building Enclosures Group for Sustainable Building Partners, will be hosting an open forum, focusing on pre-and post installed balconies and canopy details in real-world applications. Send project-specific issues with an example picture or detail to lhardman@airbarrier.org (redact sensitive information). The webinar will be interactive, and solutions will be provided on the call.
Discussion will include, but is not limited to:

Connections under the balconies, where structural framing supports come through the AVB
Balcony deck to wall connections
Connections to balcony doors, proper flashing and heights
Canopies installed post AVB with connections through the facade
Pre-Fabricated balconies and those connections vs traditional stick built

This webinar is exclusive to the ABAA contractor members. Please reach out to lhardman@airbarrier.org to register.

Lessons Learned: Trades that Need to Include an AVB Discussion in their Specification & Preinstallation Meetings 1.0 CEU/HSW
2026-04-30 13:00 - 14:00
Lessons Learned: Trades that Need to Include an AVB Discussion in their Specification & Preinstallation Meetings
When designing a building envelope wall system, specifying, detailing, and having a pre-installation discussion about the backup substrate and façade elements, considering the water, air, vapor, and insulation systems detailing, is critical. This involves careful coordination with all façade trade elements, consideration of construction and installation tolerances, addressing the installation requirements for the substrate wall, water and air resistive barriers, insulation, and façade support system, and learning lessons from each installation. Each component must be thoroughly understood and specified within their respective specification sections to ensure comprehensive detailing. By understanding the necessary connections, material compatibility, tested systems, and limitations of construction materials, you can develop pre-installation conversation points within each building envelope and substrate meetings to proactively develop an advanced conversation about detailing, grasping the construction requirements for each component and incorporating lessons learned will enhance future detailing and specifications will significantly improve the chances of project success.
Learning Objectives:

Identify early structural design considerations needed to maintain air, vapor, water, insulation, and rainscreen systems in bid documents.
Incorporate construction tolerances when detailing substrate walls and control layers for various façade systems.
Recognize common substrate and façade wall systems and the detailing needed to coordinate drawings and specifications.
Apply lessons learned on continuity, fastening, membranes, and system tolerances to improve coordination and guide pre-installation meetings.

Register Now
Corey Zussman, AIA, NCARB, ALA (IL, IN, WI), RBEC, RRC, REWC, RWC, RRO, CABS, CCQM, CDT, CQM, CxA+BE, BECxP, LEED AP BD+C, Level II Thermographer, QA/QC Vice President, AECOM Hunt Construction
As a forensic architect registered in several states, Corey Zussman has practiced in the construction industry for over 30 years. He specializes in the building envelope, restoration, preservation, life safety, and interior finishes. While working on over 2000 projects, Corey conducts constructability reviews, pre-installation meetings, comprehensive envelope meetings, and construction observations. He has also become known for providing educational opportunities throughout the industry and has produced more than 200 “lessons learned” papers. Topics include building envelope and life safety concerns, enabling Corey to proactively address issues during design review, pre-construction, and construction. In addition, he has over 15 industry articles about building envelope and life safety topics. He is also a frequent presenter at local and national conferences and associations with over 50 AIA accredited presentations.

ABAA ASI Ad Hoc Group Meeting
2026-05-01 11:00 - 12:00, 2026-05-08 11:00 - 12:00, 2026-05-15 11:00 - 12:00, 2026-05-22 11:00 - 12:00, 2026-05-29 11:00 - 12:00
Conference Call
All times shown are in Eastern Time Zones

ABAA Conference Field Auditor Training Course
2026-05-05 08:00 - 2026-05-07 16:00 | Hyatt Regency Minneapolis, 1300 Nicollet Mall, Minneapolis, MN, 55403, United States
ABAA Conference Field Auditor Training Course
DESCRIPTION: This course emphasizes understanding the need for and function of an air barrier assembly, the ability to inspect installation and review materials for compliance with specifications, ABAA requirements, and manufacturer requirements, the ability to confirm proper installation through on-site testing and the documentation required throughout the air barrier installation process.

Due to limited capacity, ABAA’s training courses at the upcoming conference are now full.
We encourage you to join the waitlist to receive updates on availability and explore additional training opportunities.
Join Waitlist

ABAA Conference Self-Adhered & Fluid Applied Installer Certification Training Course
2026-05-05 08:00 - 2026-05-07 16:00 | Hyatt Regency Minneapolis, 1300 Nicollet Mall, Minneapolis, MN, 55403, United States
DESCRIPTION:
This course is designed to teach experienced installers how to create an Air Barrier using Self-Adhered and Fluid Applied materials. This course includes instruction on everything from selecting proper materials, substrate preparation, application technology, troubleshooting, and hands-on training.

Due to limited capacity, ABAA’s training courses at the upcoming conference are now full.
We encourage you to join the waitlist to receive updates on availability and explore additional training opportunities.
Join Waitlist

ABAA Conference Sprayed Polyurethane Foam Installer Certification Training Course
2026-05-05 08:00 - 2026-05-07 16:00 | Hyatt Regency Minneapolis, 1300 Nicollet Mall, Minneapolis, MN, 55403, United States
DESCRIPTION:
This course is designed to teach experienced installers how to create an Air Barrier using Spray Polyurethane Foam materials. This course includes instruction on everything from selecting proper materials, substrate preparation, application technology, troubleshooting, and hands-on training.

Due to limited capacity, ABAA’s training courses at the upcoming conference are now full.
We encourage you to join the waitlist to receive updates on availability and explore additional training opportunities.
Join Waitlist

ABAA Building Enclosure Conference 2026
2026-05-05 09:00 - 2026-05-06 18:00 | Hyatt Regency Minneapolis, 1300 Nicollet Mall, Minneapolis, MN, 55403, United States
ABAA’s annual Building Enclosure Conference will be held in Minneapolis, MN from May 5-6, 2025.
Register Today
Exhibit – Showcase your expertise in building enclosures, attract new leads and foster relationships.
Sponsor – Boost Brand visibility, support industry growth and create lasting connections with targeted audiences
Attend – Expand your knowledge, build connections and inspire new ideas in the air barrier industry.

ABAA Chair Training Session
2026-05-07 09:00 - 09:45
Face-to-Face in Minneapolis, MN with call-in option (Regency Room: 2nd level)
All times shown are in Eastern Time Zones

ABAA Marketing Committee Meeting
2026-05-07 10:00 - 11:00
Face-to-Face in Minneapolis, MN (no call-in option) (Skyway Suite A/B: 2nd level)
All times shown are in Eastern Time Zones

ABAA Research Committee Meeting
2026-05-07 10:00 - 11:30

ABAA QAP Committee Meeting
2026-05-07 11:15 - 12:30
Face-to-Face in Minneapolis, MN with call-in option (Skyway Suite A/B: 2nd level)
All times shown are in Eastern Time Zones

ABAA Technical Committee Meeting
2026-05-07 11:45 - 13:15

ABAA Education and Training Committee
2026-05-07 12:45 - 13:45

ABAA Contractors Committee Meeting
2026-05-07 14:00 - 15:00

CSI MSP/BEC MN present IMI/BAC Rodeo RoundUp on Building Envelopes and Hands-on Experience
2026-05-12 09:30 - 14:00 | International Masonry Institute Training Center, 5420 International Parkway, New Hope, 55428, United States
Earn up to 1.0 LU/HSW
Register Today

Program Agenda
9:30-10:30AM Vendor Tabletop Set-up
10:30-11:15AM Register and Vendor showcase
11:00-11:15AM Catered Lunch is served, Announcements and Assign attendees into teams
11:15AM-12:15PM
THROUGH-WALL FLASHINGS COMPATIBILITY, SUSTAINABILITY & PERFORMANCE 1.0 LU/HSW
Robert Bleistein Jr., CSI, CDT, Regional Manager, York Flashings
This presentation will provide an overview of all flashing choices that can be selected and specified and provide information on how to make product selections and what materials are not compatible in a system. Real-life examples of various systems and transitions will provide attendees with an understanding of the successful construction of these components.
12:15-12:30PM Vendor Showcase & Moving Teams to First Workstation
12:30-1:30PM Rodeo Roundup moving between three work areas (15 minutes hands-on, 5 minutes transition/set-up)
1:30-2:00PM Review the Roundup, Q&A, Wrap Ip
2:00PM Meeting Adjourned

Registration Fee: Members $20, Non-Members $30
Venue:
International Masonry Institute Training Center
5420 International Parkway
New Hope, MN 55428

CSI Sacramento Symposium & West Region Conference
2026-05-13 - 2026-05-15
CSI Sacramento is joining forces with West Region this year for a two-day West Region Conference & Sacramento Chapter Symposium

The CSI Sacramento Symposium is coming back for its 4th year! This time, we’re partnering with CSI West Region to host a 2-day Symposium & West Region Conference!
Our event will offer expert presentations, invaluable insight from industry leaders, and cutting-edge construction technology that is shaping the future of the built environment.
Register Here
Denali Jones will be presenting “Achieving a High-Performance Air Barrier System”.

Sink or Swim: Effective Natatorium Envelope Design Thru Case Study 1.0 CEU/HSW
2026-05-14 13:00 - 14:00
Sink or Swim: Effective Natatorium Envelope Design Thru Case Study
Participants will develop a comprehensive understanding of the potential risks involved in designing roof and wall assemblies over pools and other corrosive environments. The session will cover effective design strategies to mitigate moisture damage by managing air, temperature, and vapor control. Key roof assembly elements—such as metal decking, fasteners, air/vapor barriers, and insulation—will be discussed in detail. Finally, these principles will be applied in a case study, covering the full project lifecycle from concept and design to application, inspections, and handover.
Learning Objectives:

Explain how moisture intrudes and affects roof/wall assemblies over pools and caustic environments.
Summarize the typical materials of construction, and advantages associated with material selection in roof and wall assemblies.
Identify the functional performance-based characteristics of a high-performance enclosure system.
Analyze various preferred natatorium roof/wall assembly details and applications in a case study.

Register Now
Q. Jonnie Hasan, M. Eng. (Sustainable Development), Professional Engineer (P.E. Structural), BECxP, CxA+BE, Director of Engineering, IMETCO
Jonnie has more than 24 years of experience in commercial construction, design-build, and cladding industry. In his position, Jonnie has various roles: including building envelope designer, WUFI analyst, manufacturing engineer, sustainable smart building engineer, and operations manager. Jonnie is also certified as a Building Envelope Commissioning Provider & Commissioning Authority designation by University of Wisconsin. Jonnie strives to guide clients to the most cost effective and efficient product application. Jonnie is a registered Professional Engineer with numerous patents related to building cladding system and design.

ABAA Conference Committee Meeting
2026-05-14 14:00 - 15:00

Megapanel Mania: Prefabricated Exterior Wall Assemblies 1.0 CEU/HSW
2026-05-21 13:00 - 14:00
Prefabrication of exterior wall systems and assemblies is a growing trend in the construction industry. There are many terms used to describe this process (panelized, modularized, unitized, etc.) and the definition and scope of prefabrication can be as unique as the project itself. For many projects, the exterior walls are anticipated to be panelized or unitized from the start as is often the case with precast concrete panels and aluminum-frame curtain wall systems. However, sometimes modularization is proposed by the construction team after design is complete as a means of expediting the schedule, addressing site access constraints, and/or lowering project costs. The presenters will describe different types of panelized exterior wall assemblies and will present a case study regarding a 10-story, 700,000 square foot healthcare facility that utilized megapanel exterior wall construction. The change to a panelized approach occurred after the design was complete, resulting in challenges associated with continuity of air, water, and thermal control layers, particularly at the interface conditions. Perspectives and lessons learned from the building enclosure commissioning provider (BECxP) and contractor’s building enclosure consultant for this project will also be offered.
Learning Objectives:

Understand various exterior wall prefabrication techniques and several advantages and drawbacks of panelized construction.
Demonstrate an understanding of building science and the impacts of megapanel joinery and transitions with respect to building enclosure performance and continuity of air, water, thermal, and vapor control layers.
Appreciate challenges associated with integrating exterior wall and roof construction in panelized assemblies.
Describe building enclosure quality assurance and quality control efforts that can be performed in the prefabrication facility, for mock-ups, and at the construction site.

Register Now
Sarah Sinusas, PE, Senior Associate, Wiss, Janney, Elstner Associates
Sarah Sinusas is a Senior Associate at Wiss, Janney, Elstner Associates Inc. (WJE) in the firm’s New Haven, Connecticut office. She is a Professional Engineer and has specialized in building envelope systems since beginning her career in 2008. She specializes in the evaluation and investigation of fenestration assemblies and building science assessments, and has participated in and led projects that include design, detailing, testing, and monitoring of a variety of cladding and glazing systems. Her work has included peer reviews of architectural and envelope shop drawings, thermal modeling of wall assemblies, as well as investigations, field observations, and construction monitoring for both new construction and repairs to existing structures.

Patrick Reicher, SE, REWC, REWO, CCS, CCCA, Principal, Raths, Raths, & Johnson Inc.
Patrick has 18 years’ experience with the forensic investigation, evaluation, and repair design of existing building enclosures and structures; and building enclosure consulting and commissioning for new construction projects. Mr. Reicher is a Structural Engineer in Illinois and a Professional Engineer in several states. He is also a Registered Exterior Wall Consultant, Registered Exterior Wall Observer, Certified Construction Specifier, and Certified Construction Contract Administrator. He currently serves on several committees and task forces for the International Institute of Building Enclosure Consultants (IIBEC) and the Fenestration and Glazing Industry Alliance (FGIA).

ABAA Board of Directors Meeting - Bylaw Revisions
2026-05-21 13:30 - 14:30

ABAA Contractor Webinar: Fluid-Applied Air Barrier Membrane Thickness Study
2026-05-27 11:00 - 12:00
This presentation will outline the general use of ultrasonic measurement devices, discuss considerations related to in-situ measurements and substrate impacts, and present preliminary findings along with planned next steps for the study.
Presenters: Sarah Flock, Principal – Raths, Raths, & Johnson / Andrew Dunlap, Vice-President, Building Technology Studio Leader – SmithGroup
This webinar is exclusive to the ABAA contractor members. Please reach out to lhardman@airbarrier.org to register.

ABAA Ad Hoc Group Meeting - Define Self Adhered Sheet Membranes and Adhesive Backed Commercial Wrap
2026-05-27 12:00 - 13:00

ABAA Board of Directors Meeting
2026-05-28 11:00 - 12:00

Buildings Move, Buildings Leak: Revisiting the Critical Link Between Engineering Mechanics and Enclosure Performance 1.0 CEU/HSW
2026-05-28 13:00 - 14:00
“Systems thinking” is a term that is discussed at times in Building Science. But what if systems thinking asks us to consider more factors in the long term viability of enclosure integrity? While the relationship between structural movement and a structure’s usefulness to its intended purpose has been well developed throughout the history of design and construction, that understanding has not always translated well into satisfactory enclosure performance.
Drawing on experiences in post-construction forensic investigations, troubleshooting during construction, and efforts to influence design detailing, this presentation will discuss key factors in applying engineering mechanics for the benefit (or detriment) of enclosure performance. Specific aspects to be shared will include the cross-party dynamics in design and construction that give rise to current challenges, case studies of failures as a result of insufficient consideration, and areas for improvement across the design and construction industry.
Learning Objectives:

Participants will develop a better understanding of the relationship between movement of materials and enclosure integrity
Participants will gain perspective around what should be considered minimum baseline requirements for performance specifications particular to accommodating movement
Participants will learn about case studies where enclosure systems were compromised or even failed as a result of limited awareness around building movement
Participants will see examples that reinforce the connection between effective project collaboration and desired performance of the enclosure

Register Now
Jon Porter, P.E. (MN), Associate AIA, Director of Building Science, Kraus-Anderson Construction Company
Jon Porter is the Director of Building Science at Kraus Anderson Construction. In his role at KA, Jon focuses on building performance, particularly the exterior enclosure and interior finishes. He serves as a technical resource to project teams in relation to means and methods, constructability, building materials technology, workflow and sequencing, proper installation techniques, and testing and acceptance protocols. A licensed Professional Engineer in the State on Minnesota, Jon has more than 25 years of design and construction experience, including roles in forensic investigation of design and construction failures and as an owner’s representative.

ABAA Annual General Meeting
2026-06-04 11:00 - 12:00
Conference Call
All times shown are in Eastern Time Zones This is a private event for ABAA members only.

Your Voice Matters
The AGM is your opportunity to directly influence the direction of ABAA. To conduct official business, a quorum of at least 10% of the membership must be met. As a corporate-based membership organization, each member company has a voice—and a vote. We strongly encourage every company to be represented to ensure decisions reflect the full membership.
Order of Business
The following items will be presented for review and/or vote:

Audited Financial Statements for the 2025 Fiscal Year
Election of Directors
Proposed Bylaw Revisions

Your participation ensures your company has a direct say in these important decisions.
How to Attend
To attend the AGM, you must register in advance. You will have received an registration link sent to your email. If you have not received this email, please contact us.
Once registered, you will receive a confirmation email with instructions on how to join the virtual meeting. Please add this to your calendar to block the time off.
Membership & Voting
While multiple individuals from your company are welcome to attend, only one vote per member company will be counted. Each voting member company in good standing is entitled to one vote. Non-voting members do not have voting rights.
Unable to Attend? Consider Your Representation
If your company is unable to attend, you may appoint a proxy to vote on your behalf. Appointing a proxy means authorizing another ABAA voting member in good standing to attend the meeting and cast your company’s vote as specified in your proxy. Please note that your proxy holder must be another voting member of the Association.
However, we encourage you to attend whenever possible to ensure your company’s perspective is represented directly. If you need the proxy form, please contact us.

Managing Moisture Risk in Cold-Climate Roof Assemblies Using WUFI Hygrothermal Analysis 1.0 CEU/HSW
2026-06-04 13:00 - 14:00
This course examines how modern building codes and airtight construction practices are increasing the importance of moisture-aware roof design in cold-climate environments. Participants will explore building code requirements and the growing risk of moisture entrapment in roofing assemblies. The course introduces hygrothermal modeling as a predictive tool, using WUFI to analyze roof assemblies’ long-term performance. Through comparative analysis using real-world case studies, attendees will gain a clear understanding of how vapor-permeable underlayments enhance drying potential and provide greater moisture management compared to vapor-impermeable membranes, supporting more durable and resilient roof system design decisions.
Learning Objectives:

Identify the relationship between current building codes and the increased risk of moisture entrapment in airtight building envelopes.
Understand the role of hygrothermal analysis (WUFI) in predicting the long-term performance of roof assemblies in cold climates.
Analyze the difference between vapor-permeable and vapor-impermeable membranes regarding drying capacity and “moisture safety margins.”
Assess WUFI case studies to understand how vapor-permeable underlayments improve moisture performance compared to vapor-impermeable underlayments.

Register Now
Scott Wood, Senior Building Scientist, VaproShield
Mr. Scott Wood has decades of experience in building science and infrared thermography as an instructor and consultant. As the Senior Building Scientist for VaproShield he operates the FrogLab, testing and evaluating AB/WRB systems and associated accessories. He provides technical support for the company’s representatives, client inquiries, and assists in development – updating product literature and creating VaproShield’s AIA presentations. His expertise has provided numerous papers and presentations in both the building and thermography sciences.
His credentials and memberships span a large array of specialties including B.S. in Microbiology with an emphasis in biochemistry and molecular biology, trained in WUFI, fire/mold-water/asbestos/odor remediation, Level III Thermographer, memberships in ASTM C06 & C16 committees, BEC, IACT, AUPTA, ABAA.
