BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//ABAA - ECPv6.15.17.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:ABAA
X-ORIGINAL-URL:https://airbarrier.org
X-WR-CALDESC:Events for ABAA
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Detroit
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260218T110000
DTEND;TZID=America/Detroit:20260218T120000
DTSTAMP:20260403T182151
CREATED:20260127T001912Z
LAST-MODIFIED:20260127T001912Z
UID:990000286-1771412400-1771416000@airbarrier.org
SUMMARY:ABAA Nominating Committee Meeting
DESCRIPTION:Conference Call \nAll times shown are in Eastern Time Zones
URL:https://airbarrier.org/event/abaa-nominating-committee-meeting-2/
CATEGORIES:ABAA Committee Calls
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Committee-Calls.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260219T090000
DTEND;TZID=America/Detroit:20260219T143000
DTSTAMP:20260403T182151
CREATED:20260112T212213Z
LAST-MODIFIED:20260116T213322Z
UID:990000270-1771491600-1771511400@airbarrier.org
SUMMARY:AIA Tampa Bay BEC Tampa Bay Air Barrier Symposium
DESCRIPTION:Preventing Moisture Failure in Building Envelopes: Design\, Construction & Field-Testing Strategies\nEarn up to 4.5 LU/HSW \nRegister Today \nProgram Agenda \n8:00 – 8:30 AM\nRegistration\, Continental Breakfast & Welcome \n8:30 – 9:30 AM\nAir & Water Barrier Field Testing During Construction\nLaverne Dalgleish\, Executive Director\, Air Barrier Association of America\nThis session reviews key methods for verifying air barrier performance during construction\, including demonstrations of equipment and techniques used to measure air leakage\, adhesion\, and other material-specific tests to confirm compliance with project specifications. \n9:30 – 9:40 AM\nBreak \n9:40 – 10:40 AM\nBuilding Envelope Case Study: From Initial Constructability Through Occupancy\nCorey Zussman\, AIA\, NCARB\nQA/QC Vice President\, AECOM Hunt Construction\nThis case study follows a four-story university building from pre-bid constructability review through turnover\, addressing air and vapor barriers\, flashing\, waterproofing\, window installation\, and roof transitions\, with lessons learned from mock-ups\, testing\, and first-work-in-place reviews. \n10:40 – 10:50 AM\nBreak \n10:50 – 11:50 AM\nIt’s Not Raining—Why Is My Roof Leaking?\nLaverne Dalgleish\, Executive Director\, Air Barrier Association of America\nMoisture intrusion isn’t always caused by leaks. This session explores hidden moisture transport mechanisms\, explains why perm ratings alone can be misleading\, and demonstrates how water can enter assemblies—and how to prevent it. \n11:50 AM – 12:00 PM\nBreak & Boxed Lunch Pickup \n12:00 – 1:30 PM\nUnderstanding Critical Transitions of Air\, Vapor & Moisture Barriers\nCorey Zussman\, AIA\, NCARB\nQA/QC Vice President\, AECOM Hunt Construction\nThis presentation identifies common critical transitions in complex building types and provides guidance on sequencing\, detailing\, and coordination to reduce constructability issues and potential rework\, using drawings and construction photos from real-world installations. \nRegistration Fees: \n\nMembers: $30\nNon-members: $50\n\nSponsorships Contact:\nTamara Foncerrada / tamara@airbarrier.org \nVenue:\nAIA Tampa Bay\nCenter for Architecture & Design\, Tampa Bay\n1208 North Howard Avenue\nTampa\, FL 33607
URL:https://airbarrier.org/event/aia-tampa-bay-bec-tampa-bay-air-barrier-symposium/
LOCATION:Center for Architecture and Design Tampa Bay\, 1208 North Howard Ave\, Tampa Bay\, FL\, 33607\, United States
CATEGORIES:Industry Events
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2026/01/Feature-Image-Tampa-2026.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260219T110000
DTEND;TZID=America/Detroit:20260219T120000
DTSTAMP:20260403T182151
CREATED:20260127T001946Z
LAST-MODIFIED:20260127T001946Z
UID:990000285-1771498800-1771502400@airbarrier.org
SUMMARY:ABAA Marketing Committee Meeting
DESCRIPTION:Conference Call \nAll times shown are in Eastern Time Zones
URL:https://airbarrier.org/event/abaa-marketing-committee-meeting-8/
CATEGORIES:ABAA Committee Calls
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Committee-Calls.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260219T130000
DTEND;TZID=America/Detroit:20260219T140000
DTSTAMP:20260403T182151
CREATED:20251201T203159Z
LAST-MODIFIED:20251231T174729Z
UID:990000239-1771506000-1771509600@airbarrier.org
SUMMARY:Electronic Leak Detection: Lessons Learned from ELD Testing & Continuous Monitoring  1.0 CEU/HSW
DESCRIPTION:Electronic Leak Detection: Lessons Learned from ELD Testing & Continuous Monitoring\nThis one hour course will cover the lessons learned from multiple case studies regarding Electronic Leak Detection (ELD) quality control testing as part of new construction\, forensic testing in existing buildings with active leaks\, and continuous moisture monitoring for conventional roofing. Participants will learn about the principles outlined in the ASTM Standard Guide D7877 and ASTM Standard Practice D8231 and will be able to identify common causes for moisture intrusion. \nLearning Objectives: \n\nUnderstand the science\, capabilities and limitations of Electronic Leak Detection (ELD) as outlined in ASTM Guide D7877 & ASTM Practice D8231.\nRecognize common causes of failures found in numerous types of roofing and waterproofing membranes.\nIdentify potential future design and construction failures based on analyzed data from real time construction monitoring.\nDistinguish different applications for ELD testing and continuous moisture monitoring for risk mitigation and loss control.\n\nRegister Now \nShaun Katz\, CSI\, ASTM Member\, Product Line Manager\, Detec Systems \nShaun has over 20 years of experience in customer service and business administration. He has assisted facility/property managers and building owners\, contractors\, architects\, engineers\, consultants\, and manufacturers with forensic leak investigation\, as well as leak detection in new construction. He has performed ELD product demos and presentations throughout the world\, and won the 2020 Presenter of the Year award from the Chicago Chapter of IIBEC. His goal is to provide a basic understanding of Electronic Leak Detection and to assist all parties with ensuring valid and conclusive ELD. He is an active member of CSI and IIBEC.
URL:https://airbarrier.org/event/electronic-leak-detection-lessons-learned-from-eld-testing-continuous-monitoring-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/12/Electronic-Leak-Detection_02-19_WebsiteSlide.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260220T100000
DTEND;TZID=America/Detroit:20260220T110000
DTSTAMP:20260403T182151
CREATED:20251218T202117Z
LAST-MODIFIED:20251218T202117Z
UID:990000264-1771581600-1771585200@airbarrier.org
SUMMARY:Virtual Training for ABAA Chairs
DESCRIPTION:Conference Call \nAll times shown are in Eastern Time Zones
URL:https://airbarrier.org/event/virtual-training-for-abaa-chairs/
CATEGORIES:ABAA Committee Calls
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Committee-Calls.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260220T110000
DTEND;TZID=America/Detroit:20260220T120000
DTSTAMP:20260403T182151
CREATED:20251217T154634Z
LAST-MODIFIED:20251217T154634Z
UID:990000253-1771585200-1771588800@airbarrier.org
SUMMARY:ABAA ASI Ad Hoc Group Meeting
DESCRIPTION:Conference Call \nAll times shown are in Eastern Time Zones
URL:https://airbarrier.org/event/abaa-asi-ad-hoc-group-meeting-37/
CATEGORIES:ABAA Committee Calls
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Committee-Calls.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260223T130000
DTEND;TZID=America/Detroit:20260223T140000
DTSTAMP:20260403T182151
CREATED:20260217T190221Z
LAST-MODIFIED:20260217T190221Z
UID:990000307-1771851600-1771855200@airbarrier.org
SUMMARY:ASI Board Meeting
DESCRIPTION:Conference Call \nAll times shown are in Eastern Time Zones
URL:https://airbarrier.org/event/asi-board-meeting/
CATEGORIES:ABAA Committee Calls
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Committee-Calls.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260224T100000
DTEND;TZID=America/Detroit:20260226T163000
DTSTAMP:20260403T182151
CREATED:20251121T210357Z
LAST-MODIFIED:20251121T211100Z
UID:990000216-1771927200-1772123400@airbarrier.org
SUMMARY:Online Self-Adhered & Fluid Applied Installer Certification Training Course
DESCRIPTION:DEADLINE TO REGISTER IS FRIDAY\, FEBRUARY 6\, 2026\nDownload Registration Form \nOnline ABAA Training course \nPhysical installer manuals will be sent out. Those who register early will have a better chance of receiving their manual prior to the start of training. Having the manual for the online training modules is not required\, but highly recommended to have before writing the exam. \n\nDESCRIPTION:\nThis course is designed to teach experienced installers how to create an Air Barrier using Self-Adhered and Fluid Applied materials. This course includes instruction on everything from selecting proper materials\, substrate preparation\, application technology and troubleshooting. \nMore Information \n\n\nNot an Installer? \nABAA courses are open to everyone and are a great training opportunity for all\, including General Contractors\, Suppliers\, Manufacturers sales rep\, Architectural Reps\, and anyone in the construction industry. There is NO experience needed to attend one of our great training courses. \n\nInterested in Certification?\nSelf-Adhered and Fluid Applied installer training is designed to teach experienced installers how to create an Air Barrier using Self Adhered and Fluid Applied materials. This course includes instruction on everything from selecting proper materials\, substrate preparation\, application technology\, troubleshooting and hands-on training. \nFor certification purposes\, a minimum of 3000 hours of work experience either directly with air barriers or in applicable related trade experience is required. \nFor companies seeking to become ABAA Accredited Contractor\, it is ABAA policy that each company has at least 1 person trained in an ABAA Installer Training Course and certified as an ABAA Level 3 Installer\, and at least 1 person trained in the Quality Assurance Program Administrator Course. \n\nQuestions?\nPlease email us at training@airbarrier.org \nSee you there! \nDownload Registration Form \nCOURSE BEGINS TUESDAY\, FEBRUARY 24\, 2026 AT 10:00AM ET. IF YOU DO NOT RECEIVE A CONFIRMATION EMAIL WITHIN 3 BUSINESS DAYS OF REGISTERING\, PLEASE CONTACT US DIRECTLY. \nDEADLINE TO REGISTER IS FRIDAY\, FEBRUARY 6\, 2026
URL:https://airbarrier.org/event/self-adhered-fluid-applied-installer-certification-training-course/
CATEGORIES:Training Courses
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Virtual-Courses.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260225T110000
DTEND;TZID=America/Detroit:20260225T120000
DTSTAMP:20260403T182151
CREATED:20260108T145950Z
LAST-MODIFIED:20260108T145950Z
UID:990000269-1772017200-1772020800@airbarrier.org
SUMMARY:ABAA Contractor Webinar: Air Barrier Installation and Quality Control Fundamentals
DESCRIPTION:Join us for an informative presentation that emphasizes the importance of proper air barrier application in enhancing building performance.  Properly installed air barriers are critical in preventing air leakage\, which can lead to energy inefficiencies\, moisture issues\, and compromised indoor air quality. \nWe will delve into best practices for air barrier application\, highlighting the techniques that ensure continuity and effectiveness.  Attendees will learn about common challenges faced during installation and the vital role of quality control in maintaining the integrity of the air barrier system. \nThrough real-world project photo’s\, we’ll illustrate key application requirements for a variety of air barrier materials and exactly what to look for when performing quality control and site-testing. \nThis webinar is exclusive to the ABAA contractor members.  Please reach out to lhardman@airbarrier.org to register.
URL:https://airbarrier.org/event/abaa-contractor-webinar-air-barrier-installation-and-quality-control-fundamentals/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/04/Contractor-Webinar-1-scaled.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260226T100000
DTEND;TZID=America/Detroit:20260226T110000
DTSTAMP:20260403T182151
CREATED:20260209T221914Z
LAST-MODIFIED:20260209T221914Z
UID:990000301-1772100000-1772103600@airbarrier.org
SUMMARY:ABAA ExCom Meeting
DESCRIPTION:Conference Call \nAll times shown are in Eastern Time Zones
URL:https://airbarrier.org/event/abaa-excom-meeting-5/
CATEGORIES:ABAA Committee Calls
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Committee-Calls.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260226T130000
DTEND;TZID=America/Detroit:20260226T140000
DTSTAMP:20260403T182151
CREATED:20251201T215810Z
LAST-MODIFIED:20251231T174725Z
UID:990000240-1772110800-1772114400@airbarrier.org
SUMMARY:Prefabricated Exterior Wall Assemblies: Herding Cats in Hard Hats 1.0 CEU/HSW
DESCRIPTION:Prefabricated Exterior Wall Assemblies: Herding Cats in Hard Hats\nPrefabrication of exterior wall assemblies has been explored since the 1920s and 1930s\, so the concept of their use is nothing new to the built environment. Today\, the construction industry’s focus is ensuring continuity of air\, water\, and thermal barriers—regardless of whether wall assemblies are built in the field or in a shop. Prefabricated exterior wall systems are designed to meet these requirements. This presentation will introduce perspectives from both a General Contractor involved in delegated design and a building enclosure consultant who reviews design\, fabrication\, and installation. Case studies will highlight code and industry inspection requirements\, review processes\, and lessons learned in coordinating prefabricated assemblies with other trades. Presenters will include Colton Howard with Terracon supporting Kayla Maines\, and we plan to bring in a prefabrication manufacturer to share their viewpoint. \nLearning Objectives: \n\n Describe the history and different types of prefabricated exterior wall panels.\n Contracting and coordinating the delegated design process with the applicable trade partners. Turn-Key\, Means & Methods\, and who owns the details?\n Review applicable codes and standards and methods for testing and inspecting these assemblies.\nDemonstrate the process of designing and construction of the prefabricated exterior wall assembly and how it incorporates the air\, thermal and water barriers within it.\n\nRegister Now \nKayla Maines\, AIA\, Senior Architect\, Terracon Consultants\, Inc\, \nKayla Maines joined Austin Terracon-Facilities in May of 2018. She is a Registered Architect in the state of Texas and Oklahoma\, Legacy LEED AP\, and Building Enclosure Commissioning Provider (BECxP) and a Commissioning Authority +Building Enclosure (CxA+BE) She has 17 years of experience that includes managing projects from Schematic Design through Construction Administration\, multidiscipline coordination\, peer reviews\, design assistance\, building assessments\, reviews submittals and shop drawings\, performs field observations and building enclosure testing\, historic preservation\, and building enclosure commissioning. Kayla was the 2020 Chair of the Austin Building Enclosure Council (BEC: Austin) and currently serves as a board member for BEC: Austin. She also serves as the Secretary of the Austin Construction Specification Institute (CSI). Mrs. Maines is a Terracon Subject Matter Expert (SME) for Building Enclosure Commissioning (BECx) and an Authorized Project Review (APR). \n\nTrevor Brown\, Regional Quality Director\, JE Dunn \nTrevor has been with JE Dunn Construction for 18 years and has dedicated 25 years to the Construction Quality profession. As an experienced Quality Director\, he has a proven track record in the construction industry\, showcasing his expertise in Building Envelope Design\, Constructability Reviews\, Mock-ups\, Construction Processes\, Pre-construction Activities\, Team Leadership\, Teaching/Training\, and Contract Management. Trevor is a highly skilled quality assurance professional\, holding Special Inspector Certifications focused on the International Building Code and other industry certifications specializing in building envelope systems\, testing\, and performance. He is a respected member of the building enclosure community. Acting as technical resource for building envelope design\, construction\, and code compliance. \n  \n\n \nColton Howard\, CEI\, Senior Facilities Professional\, Terracon Consultants\, Inc. \nColton is a Senior Facilities professional in Terracon’s Austin\, Texas office. He performs investigative testing and surveys of roofing and waterproofing components to identify deterioration and probable sources of water infiltration\, generates reports of observations and findings with recommendations and cost estimates\, and design repairs and renovations for building envelopes. Colton also oversees the different ASTM and AAMA standard tests or specialized testing. Colton also performs peer reviews of drawings and specifications and provides bid phase project management and construction phase project management services. \nColton has managed and overseen all phases of new and existing construction projects; commercial\, remedial\, residential structures\, schools\, historic rehabilitation\, observation\, reporting\, and forensic investigation and installation of roof and exterior waterproofing and wall systems. He has also performed design surveys\, peer reviews\, bidding and award\, construction administration\, observation and reporting\, and close-out documents in accordance with the RCI Manual of Practice. Colton also consults with architects and engineers recommending materials\, applications\, and design support\, and trains new personnel.
URL:https://airbarrier.org/event/prefabricated-exterior-wall-assemblies-herding-cats-in-hard-hats-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/12/Prefabricated-Exterior-Wall-Assemblies_02-26_WebsiteSlide.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260226T150000
DTEND;TZID=America/Detroit:20260226T160000
DTSTAMP:20260403T182151
CREATED:20260202T212724Z
LAST-MODIFIED:20260202T212724Z
UID:990000292-1772118000-1772121600@airbarrier.org
SUMMARY:ABAA Technical Committee Meeting
DESCRIPTION:Conference Call \nAll times shown are in Eastern Time Zones
URL:https://airbarrier.org/event/abaa-technical-committee-meeting-7/
CATEGORIES:ABAA Committee Calls
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Committee-Calls.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260227T110000
DTEND;TZID=America/Detroit:20260227T120000
DTSTAMP:20260403T182151
CREATED:20251217T154657Z
LAST-MODIFIED:20251217T154657Z
UID:990000254-1772190000-1772193600@airbarrier.org
SUMMARY:ABAA ASI Ad Hoc Group Meeting
DESCRIPTION:Conference Call \nAll times shown are in Eastern Time Zones
URL:https://airbarrier.org/event/abaa-asi-ad-hoc-group-meeting-38/
CATEGORIES:ABAA Committee Calls
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Committee-Calls.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260303T150000
DTEND;TZID=America/Detroit:20260303T160000
DTSTAMP:20260403T182151
CREATED:20260219T153435Z
LAST-MODIFIED:20260219T153435Z
UID:990000309-1772550000-1772553600@airbarrier.org
SUMMARY:ABAA QAP Committee Meeting
DESCRIPTION:Conference Call \nAll times shown are in Eastern Time Zones
URL:https://airbarrier.org/event/abaa-qap-committee-meeting-9/
CATEGORIES:ABAA Committee Calls
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Committee-Calls.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260305T130000
DTEND;TZID=America/Detroit:20260305T140000
DTSTAMP:20260403T182151
CREATED:20260122T221338Z
LAST-MODIFIED:20260212T070445Z
UID:990000277-1772715600-1772719200@airbarrier.org
SUMMARY:Deciphering the Complexity of Adhered Veneer Wall Systems 1.0 CEU/HSW
DESCRIPTION:Deciphering the Complexity of Adhered Veneer Wall Systems\nAdhered veneer cladding systems have gained popularity in the past decade with increased use in all climates across the county. Today this type of construction is not only seen on high-end residential\, but a common facade element on educational institutions\, hospitals\, airports and other commercial type buildings. While adhered veneer wall system have garnered the derogatory “lick and stick” label and are historically seen as economical\, value engineering options\, these systems have evolved significantly\, as well as the codes and standards used to design and construct them. With the increased complexity of adhered veneer systems\, deciphering the multiple building codes\, standards\, industry guidelines\, and manufacturer’s installation instructions can be challenging. Drawing on WJE’s extensive experience investigating failures of these systems\, this presentation will highlight code-compliance pathways\, key resources available for design and construction\, and general strategies to achieve a successful adhered veneer installation; inclusive of field testing and evaluation strategies. \nLearning Objectives: \n\nList the design requirements between prescriptive design versus engineered design for adhered veneer systems\nIdentify industry guides and standards (i.e.\, ASTM/ANSI) related to adhered veneer products and installation of adhered veneers.\nDescribe at least three of the most common failure mechanisms of adhered veneer systems.\nSummarize key quality control steps to consider during construction that can lead to a successful installation.\n\nRegister Now \nRenae Kwon\, Register Architect (IL\, WI\, AZ\, IN)\, Associate Principal\, Wiss\, Janney\, Elstner Associates\, Inc \nRenae Kwon is an Associate Principal with the interdisciplinary engineering\, architecture\, and material science consulting firm of Wiss\, Janney\, Elstner Associates Inc. Ms. Kwon is a licensed architect\, with experience in repair and rehabilitation of various types of facades and building envelopes as well as design peer review of building enclosure for new construction. Her focus of materials includes masonry\, stone and windows of both contemporary and historical structures.
URL:https://airbarrier.org/event/deciphering-the-complexity-of-adhered-veneer-wall-systems-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2026/01/Deciphering-the-Complexity_03_05_26-WebsiteSlide.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260306T110000
DTEND;TZID=America/Detroit:20260306T120000
DTSTAMP:20260403T182151
CREATED:20251217T154705Z
LAST-MODIFIED:20251217T154705Z
UID:990000255-1772794800-1772798400@airbarrier.org
SUMMARY:ABAA ASI Ad Hoc Group Meeting
DESCRIPTION:Conference Call \nAll times shown are in Eastern Time Zones
URL:https://airbarrier.org/event/abaa-asi-ad-hoc-group-meeting-39/
CATEGORIES:ABAA Committee Calls
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Committee-Calls.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260310T093000
DTEND;TZID=America/Detroit:20260310T160000
DTSTAMP:20260403T182151
CREATED:20250828T215555Z
LAST-MODIFIED:20260212T224634Z
UID:990000141-1773135000-1773158400@airbarrier.org
SUMMARY:ABAA\, BEC Minnesota & CSI Minneapolis-St. Paul Full Day Symposium
DESCRIPTION:ABAA in partnership with BEC Minnesota and CSI Minneapolis – St. Paul Full Day Air Barrier Symposium\nEarn up to 4.0 LU/HSW \nRegister Today \nProgram Agenda \n8:00 – 8:30 AM\nRegistration\, Breakfast\, & Networking \n8:30 – 9:30 AM\nBuilding Enclosure Architectural Details: Conveying Construction Drawing Clarity\, 1.0 LU/HSW\nMelissa Payne\, BECxP\, CxA+BE\, CDT\, BE Consulting – Forensics\, Midwest Enclosure Consulting\nIncomplete or unclear drawings often lead to performance issues in the field. This session reviews building science fundamentals and shows how to improve detail clarity at foundations\, roofs\, windows\, penetrations\, and material transitions to support durable\, energy-efficient enclosures. \n10:30 – 11:30 AM\nSelf-Adhered Membrane Applications: What Does It Really Mean to Stick? 1.0 LU/HSW\nCody Shelner\, PE\, Head of Marketing\, Air & Waterproofing\, tesa Air and Waterproofing\nSelf-adhered membranes are popular for their ease of use and reliability in air and moisture control. However\, performance depends on more than peel adhesion. This session reviews the forces these membranes must resist—wind\, stack effect\, and pressurization—and explores how to properly evaluate long-term durability under real conditions. Learn why comprehensive performance testing is essential when specifying or inspecting these systems. \n11:30AM – 12:30 PM\nLunch \n12:30 – 1:30 PM\nLocating That Elusive Point of Condensation: A Review of Hygrothermal Evaluation Fundamentals\, 1.0 LU/HSW\nAndrew Dunlap\, AIA\, NCARB\, LEED AP\, Vice President | Building Technology Studio Leader\, SmithGroup\nThis presentation will review the various types of Hygrothermal modeling tools available to assistance designers in developing a building’s exterior enclosure. Variables such as the interior and exterior climate (temperature/humidity)\, material permeance\, wall assembly types\, and transitions between adjacent construction will be explored. Understanding the impact of the decision to use various modeling techniques such as 1D/2D/3D and transient versus static modeling will be discussed. \n1:30 – 2:00 PM\nBreak \n2:00 – 3:00 PM\nFailure is Not an Option: Air Barrier Continuity Strategies for Storefront & Curtain Wall Systems\, 1.0 LU/HSW\nAndrew Dunlap\, AIA\, NCARB\, LEED AP\, Vice President | Building Technology Studio Leader\, SmithGroup\nWall-to-window transitions are a leading source of enclosure failures. This session provides a step-by-step look at sequencing and connection details\, supported by real-world photos\, to ensure airtight\, watertight\, and thermally protected assemblies. \n3:00 PM\nTeardown & Adjourn \nRegistration Fees: \n\nBEC & CSI Members: $50\nNon-members: $75\n\nSponsorships Contact:\nTamara Foncerrada / tamara@airbarrier.org \nVenue:\nBoy Scouts of America Base Camp\n6202 Bloomington Rd.\nFort Snelling\, MN 55111
URL:https://airbarrier.org/event/abaa-bec-csi-minneapolis-full-day-symposium/
LOCATION:Boy Scouts of America Base Camp\, 6202 Bloomington Rd\, Fort Snelling\, MN\, 55111\, United States
CATEGORIES:Industry Events
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/08/Website-Feature-MN-Symposium-2026-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260310T120000
DTEND;TZID=America/Detroit:20260310T130000
DTSTAMP:20260403T182151
CREATED:20260219T152136Z
LAST-MODIFIED:20260309T004422Z
UID:990000308-1773144000-1773147600@airbarrier.org
SUMMARY:ABAA Jury of Fellows Meeting - CANCELLED
DESCRIPTION:Conference Call \nAll times shown are in Eastern Time Zones
URL:https://airbarrier.org/event/abaa-jury-of-fellows-meeting-cancelled/
CATEGORIES:ABAA Committee Calls
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Committee-Calls.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260310T150000
DTEND;TZID=America/Detroit:20260310T160000
DTSTAMP:20260403T182151
CREATED:20260202T194850Z
LAST-MODIFIED:20260202T194850Z
UID:990000291-1773154800-1773158400@airbarrier.org
SUMMARY:ABAA Contractors Committee Meeting
DESCRIPTION:Conference Call \nAll times shown are in Eastern Time Zones
URL:https://airbarrier.org/event/abaa-contractors-committee-meeting-10/
CATEGORIES:ABAA Committee Calls
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Committee-Calls.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260312T130000
DTEND;TZID=America/Detroit:20260312T140000
DTSTAMP:20260403T182151
CREATED:20260205T160116Z
LAST-MODIFIED:20260213T230030Z
UID:990000298-1773320400-1773324000@airbarrier.org
SUMMARY:Elevating Enclosure Performance: Optimizing Continuous Insulation for Thermal Efficiency\, Durability\, and Safety 1.0 CEU/HSW
DESCRIPTION:Elevating Enclosure Performance: Optimizing Continuous Insulation for Thermal Efficiency\, Durability\, and Safety\nThis webinar explores how strategic continuous insulation (CI) choices can alleviate pressures on building enclosures and elevate building envelope performance\, sustainability\, durability\, and life safety. Attendees will gain insights into NFPA 285 compliance\, the role of CI in rainscreen systems\, and key considerations behind insulation material selection. The course highlights key attributes for comparing insulation types—such as R-value\, thickness\, installation requirements\, and environmental impact—and suggests design opportunities using higher-performance insulation products. Through real-world assemblies and best practices\, participants will learn how to simplify insulation choices across multiple applications to meet evolving codes\, optimize wall assemblies\, reduce thermal bridging\, and even reclaim interior square footage. Discover how doing more with less supports design efficiency and construction practicality. \nLearning Objectives: \n\nIdentify how insulation selection impacts NFPA 285 compliance and understand how different assemblies perform with various continuous insulation materials under varying environmental pressures.\nEvaluate sustainability attributes\, installation efficiencies\, and design flexibility of continuous insulation types to maximize thermal performance and minimize installation complexity.\n Explore rainscreen applications and determine critical design and installation considerations for effectively integrating continuous insulation across varied enclosure types.\nExamine how high R-value insulation can reduce wall thickness\, simplify attachment systems\, and reclaim usable space within building envelopes.\n\nRegister Now \nLance Williams\, Architectural Sales Manager\, Atlas Roofing \nLance Williams is an Architectural Sales Manager focused on how today’s enclosure choices shape tomorrow’s buildings. Drawing on more than 20 years in commercial walls and continuous insulation\, he brings a long-view perspective on performance\, risk\, and carbon grounded in building science and real-world application realities. He’s known for framing complex envelope decisions in ways that resonate with owners\, designers\, and builders alike. \n 
URL:https://airbarrier.org/event/elevating-enclosure-performance-optimizing-continuous-insulation-for-thermal-efficiency-durability-and-safety-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2026/02/ELEVAT1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260313T110000
DTEND;TZID=America/Detroit:20260313T120000
DTSTAMP:20260403T182151
CREATED:20251217T154710Z
LAST-MODIFIED:20251217T154710Z
UID:990000256-1773399600-1773403200@airbarrier.org
SUMMARY:ABAA ASI Ad Hoc Group Meeting
DESCRIPTION:Conference Call \nAll times shown are in Eastern Time Zones
URL:https://airbarrier.org/event/abaa-asi-ad-hoc-group-meeting-40/
CATEGORIES:ABAA Committee Calls
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Committee-Calls.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260316T100000
DTEND;TZID=America/Detroit:20260316T110000
DTSTAMP:20260403T182151
CREATED:20260211T143349Z
LAST-MODIFIED:20260211T143349Z
UID:990000302-1773655200-1773658800@airbarrier.org
SUMMARY:ABAA Conference Committee Meeting
DESCRIPTION:Conference Call \nAll times shown are in Eastern Time Zones
URL:https://airbarrier.org/event/abaa-conference-committee-meeting-9/
CATEGORIES:ABAA Committee Calls
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Committee-Calls.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260317T100000
DTEND;TZID=America/Detroit:20260319T163000
DTSTAMP:20260403T182151
CREATED:20251121T210728Z
LAST-MODIFIED:20260305T161347Z
UID:990000217-1773741600-1773937800@airbarrier.org
SUMMARY:Online Self-Adhered & Fluid Applied Installer Certification Training Course
DESCRIPTION:DEADLINE TO REGISTER IS FRIDAY\, FEBRUARY 27\, 2026\nRegister and Pay Online \nOnline ABAA Training course \nPhysical installer manuals will be sent out. Those who register early will have a better chance of receiving their manual prior to the start of training. Having the manual for the online training modules is not required\, but highly recommended to have before writing the exam. \n\nDESCRIPTION:\nThis course is designed to teach experienced installers how to create an Air Barrier using Self-Adhered and Fluid Applied materials. This course includes instruction on everything from selecting proper materials\, substrate preparation\, application technology and troubleshooting. \nMore Information \n\n\nNot an Installer? \nABAA courses are open to everyone and are a great training opportunity for all\, including General Contractors\, Suppliers\, Manufacturers sales rep\, Architectural Reps\, and anyone in the construction industry. There is NO experience needed to attend one of our great training courses. \n\nInterested in Certification?\nSelf-Adhered and Fluid Applied installer training is designed to teach experienced installers how to create an Air Barrier using Self Adhered and Fluid Applied materials. This course includes instruction on everything from selecting proper materials\, substrate preparation\, application technology\, troubleshooting and hands-on training. \nFor certification purposes\, a minimum of 3000 hours of work experience either directly with air barriers or in applicable related trade experience is required. \nFor companies seeking to become ABAA Accredited Contractor\, it is ABAA policy that each company has at least 1 person trained in an ABAA Installer Training Course and certified as an ABAA Level 3 Installer\, and at least 1 person trained in the Quality Assurance Program Administrator Course. \n\nQuestions?\nPlease email us at training@airbarrier.org \nSee you there! \nRegister and Pay Online \nCOURSE BEGINS TUESDAY\, MARCH 17\, 2026 AT 10:00AM ET. IF YOU DO NOT RECEIVE A CONFIRMATION EMAIL WITHIN 3 BUSINESS DAYS OF REGISTERING\, PLEASE CONTACT US DIRECTLY. \nDEADLINE TO REGISTER IS FRIDAY\, FEBRUARY 27\, 2026
URL:https://airbarrier.org/event/online-self-adhered-fluid-applied-installer-certification-training-course-10/
CATEGORIES:Training Courses
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Virtual-Courses.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260317T110000
DTEND;TZID=America/Detroit:20260317T120000
DTSTAMP:20260403T182151
CREATED:20260305T135852Z
LAST-MODIFIED:20260305T135852Z
UID:990000318-1773745200-1773748800@airbarrier.org
SUMMARY:ABAA Codes Task Group Meeting
DESCRIPTION:Conference Call \nAll times shown are in Eastern Time Zones
URL:https://airbarrier.org/event/abaa-codes-task-group-meeting-3/
CATEGORIES:ABAA Committee Calls
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Committee-Calls.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260319T130000
DTEND;TZID=America/Detroit:20260319T140000
DTSTAMP:20260403T182151
CREATED:20260126T193703Z
LAST-MODIFIED:20260213T230332Z
UID:990000284-1773925200-1773928800@airbarrier.org
SUMMARY:Connecting the Dots: Air Barrier Connections 1.0 CEU/HSW
DESCRIPTION: Connecting the Dots: Air Barrier Connections\nA chain is only as strong as its weakest link\, and this principle is equally applicable to air barriers. For an air barrier to function effectively\, it must be continuous. This is why the design process is often described by the adage\, “the pencil must not leave the paper.” This program will focus on the critical transitions between materials and guide you through the key considerations you’ll encounter when designing an air barrier system. Proper control and management of air and water are essential for the creation of durable\, healthy buildings. \nLearning Objectives: \n\n Become aware of the compatibility issues between the building enclosure’s air barrier components\n Review and discuss the areas with the highest potential for air and water issues\n Demonstrate ways to reduce the risk of water and air infiltration at transitions\n Understand how the air barrier components transition\n\nRegister Now \nMeagan Elfert\, CDT\, MBA\, Vice President\, York Flashings \nWith over a decade of dedicated service at York Flashings\, Meagan Elfert\, CDT\, MBA\, CBS currently serves as Vice President\, bringing strategic leadership and a results-driven approach to York. She manages York’s sales team across all regions of the USA\, ensuring that York remains a leader in the building products industry and reinforcing York’s reputation for quality and innovation. Meagan gives presentations on flashing and transition compatibility\, sustainability\, and performance to the AEC community across the country. She also provides educational sessions for contractors and performs job site visits to bring installers the latest technology and best flashing practices.
URL:https://airbarrier.org/event/connecting-the-dots-air-barrier-connections-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2026/01/Connecting-the-Dots_03_19_26-WebsiteSlide.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260320T110000
DTEND;TZID=America/Detroit:20260320T120000
DTSTAMP:20260403T182151
CREATED:20251217T154721Z
LAST-MODIFIED:20251217T154721Z
UID:990000257-1774004400-1774008000@airbarrier.org
SUMMARY:ABAA ASI Ad Hoc Group Meeting
DESCRIPTION:Conference Call \nAll times shown are in Eastern Time Zones
URL:https://airbarrier.org/event/abaa-asi-ad-hoc-group-meeting-41/
CATEGORIES:ABAA Committee Calls
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Committee-Calls.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260322T090000
DTEND;TZID=America/Detroit:20260326T020000
DTSTAMP:20260403T182151
CREATED:20260317T202249Z
LAST-MODIFIED:20260317T202249Z
UID:990000323-1774170000-1774490400@airbarrier.org
SUMMARY:SprayFoam Expo 2026
DESCRIPTION:ABAA will be at the 2026 SPFA SprayFoam Expo from March 22-25\, 2026! Come by and visit us at booth 4 tto connect with our team\, learn more about our training and certification programs\, and talk all things air barriers and spray foam. \nLearn More about 2026 SPFA SprayFoam Expo
URL:https://airbarrier.org/event/sprayfoam-expo-2026/
CATEGORIES:Industry Events
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2026/03/Featured-Image-SprayFoam-2026.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260322T093000
DTEND;TZID=America/Detroit:20260323T174000
DTSTAMP:20260403T182151
CREATED:20260304T195935Z
LAST-MODIFIED:20260304T201114Z
UID:990000320-1774171800-1774287600@airbarrier.org
SUMMARY:Symposium on Building Envelope Air Tightness: Design Strategies\, Testing and Impacts
DESCRIPTION:Symposium on Building Envelope Air Tightness: Design Strategies\, Testing\, and Impacts\n(In-person only event)\nDate: March 22\, 2026 – March 23\, 2026 \nEvent Location: Hyatt Regency Dallas\, Dallas\, Texas\, United States \nOrganized by: ASTM Committee E06 on Performance of Buildings \nView the technical program Multiple ABAA members & Staff Presenting \nRegister Here \n  \n 
URL:https://airbarrier.org/event/symposium-on-building-envelope-air-tightness-design-strategies-testing-and-impacts/
CATEGORIES:Industry Events
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2026/03/ASTM-Symposium-March-2026.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260325T110000
DTEND;TZID=America/Detroit:20260325T120000
DTSTAMP:20260403T182151
CREATED:20250918T154620Z
LAST-MODIFIED:20250918T154620Z
UID:990000174-1774436400-1774440000@airbarrier.org
SUMMARY:ABAA Contractor Webinar: Flashings 101
DESCRIPTION:This presentation will cover a detailed explanation of various types of flashings used in buildings\, including the challenges and solutions facing through wall flashings.  It will include a thorough description of the characteristics of several types of membranes\, emphasize the importance of compatibility\, and review proper installation techniques. \nLearning objectives \n\nDefine the attributes of a variety of flashing materials and best practices for installation\nUnderstand the compatibility between flashings and other wall components\nUnderstand how to design a resilient and durable flashing system that will minimize lifecycle costs\nExplain the performance criteria used to specify through wall flashings and transition membranes\n\nThis webinar is exclusive to the ABAA contractor members.  Please reach out to lhardman@airbarrier.org to register.
URL:https://airbarrier.org/event/abaa-contractor-webinar-flashings-101/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/04/Contractor-Webinar-1-scaled.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20260325T140000
DTEND;TZID=America/Detroit:20260325T150000
DTSTAMP:20260403T182151
CREATED:20260302T151239Z
LAST-MODIFIED:20260302T151239Z
UID:990000319-1774447200-1774450800@airbarrier.org
SUMMARY:ABAA Marketing Committee Meeting
DESCRIPTION:Conference Call \nAll times shown are in Eastern Time Zones
URL:https://airbarrier.org/event/abaa-marketing-committee-meeting-10/
CATEGORIES:ABAA Committee Calls
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Committee-Calls.png
END:VEVENT
END:VCALENDAR