ABAA

Taking the Air (Barrier) Out of ASHRAE 90.1 - with a Taste of MN Hotdish 1.0 CEU/HSW
2026-02-05 13:00 - 14:00 (America/Detroit)
Taking the Air (Barrier) Out of ASHRAE 90.1 – with a Taste of MN Hotdish
The 2021 International Energy Conservation Code (IECC) adopted ASHRAE Standard 90.1-2019, which includes mandatory requirements for air barriers. This session will explore key topics such as Whole-Building Air Leakage and Continuous Air Barrier Design and Installation—both essential components of the compliance path. Our speaker, Pam Jergenson from Minnesota, will guide attendees on the pathway through the air barrier provisions in ASHRAE 90.1-2019 and highlight Minnesota-specific amendments that may resemble your local code. And since it’s at the lunch hour, we’ll serve up those code insights with a side of cozy Minnesota hotdish flavor!
Learning Objectives:

Know the starting point and path through ASHRAE Standard 90.1-2019 for air barrier materials and systems during the design and construction phases.
Understand specific Minnesota amendments to the air barrier part of the standard, their impact, and what could be in your code.
Know Section 5, Building Envelope; specifically, the Compliance Paths, Mandatory Provisions, Submittals, Products, and Inspection and Verification for air barriers.
Analyze 5.4.3.1.1, Whole-Building Air Leakage, describing the Exceptions and the Minnesota amendment to the Exceptions that may be similar to your region.

Register Now
Pamela Jergenson, FCSI, CDT, CCS, CCCA, BECxP, CxA+BE, CABS, Technical Director of Building Science Solutions, Intertek
Ms. Jergenson is a Technical Director of Building Science Solutions at Intertek. Pam is a Certified Construction Specifier (CCS) and Certified Construction Contract Administrator (CCCA) from Construction Specifications Institute (CSI), Building Enclosure Commissioning Process Provider (BECxP) and Accredited Commissioning Authority + Building Enclosure (CxA+BE) from University of Wisconsin-Madison, ABAA Licensed Field Auditor and Certified Speaker with Air Barrier Association of America (ABAA), and Advanced Communicator Gold and Advanced Leader Bronze with Toastmasters International. She has over 35 years in construction with nearly 30 years in investigation, survey, design, construction observation, and construction contract administration of new and existing building enclosure projects; with expertise in exterior walls.

ABAA ASI Ad Hoc Group Meeting
2026-02-06 11:00 - 12:00, 2026-02-13 11:00 - 12:00, 2026-02-20 11:00 - 12:00, 2026-02-27 11:00 - 12:00, 2026-03-06 11:00 - 12:00, 2026-03-13 11:00 - 12:00
Conference Call
All times shown are in Eastern Time Zones

ABAA Conference Committee Meeting
2026-02-09 11:00 - 12:00, 2026-03-16 10:00 - 11:00

ABAA & AIA/BEC San Antonio Lunchtime CE
2026-02-11 12:30 - 15:15
ABAA in partnership with BEC San Antonio
Earn up to 2.0 LU/HSW
Register Here
Program Agenda
11:30 AM – 12:00 PM
Registration, Sign-In & Welcome
12:00 PM – 1:00 PM
Building Enclosure Pre-Construction Meetings
Presenter: Brian Stroik
1.0 LU/HSW
Pre-construction meetings are a critical component of effective quality assurance and should be clearly specified in the project manual. These meetings align owners, designers, contractors, and manufacturers on performance expectations, installation practices, sequencing, and warranty requirements before work begins. This session outlines how to structure effective pre-construction meetings to identify and resolve issues early, encourage collaboration, and reduce risk, delays, and construction-related failures.
1:00 PM – 1:15 PM
Break
1:15 PM – 2:15 PM
Through-Wall Flashings & Transition Membranes: Selection and Installation
Presenter: Craig Wetmore
1.0 LU/HSW
Effective water management depends on the proper integration of through-wall flashings with air barriers, weather-resistive barriers, and insulation systems. This session reviews common flashing types, material compatibility considerations, and key installation principles required to ensure continuity and drainage. Real-world project examples will highlight best practices for durable, high-performing transitions.
2:15 PM
Wrap-Up & Adjournment
Registration Fees:

AIA, Associate AIA Members: $15
Non-members: $25

Venue:
AIA San Antonio
1344 S. Flores Street
San Antonio, TX 78204

ABAA Contractors Committee Meeting (CXLD)
2026-02-11 15:00 - 16:00

Building Enclosures Durability Analysis with Hygrothermal Modeling 1.0 CEU/HSW
2026-02-12 13:00 - 14:00
Building Enclosures Durability Analysis with Hygrothermal Modeling
Hygrothermal modeling, the analysis of heat and moisture transport through building enclosure assemblies, reveals many of the climate-specific building science secrets that are key to durable design of walls and roofs and other assemblies. Debunking rules of thumb and avoiding answers of “it depends” – data and analysis can reveal exactly how many inches of a certain insulation are required, exactly what perm-rating will optimize an assembly, and what kind of havoc a reservoir cladding system can create. Case studies will be shown that demonstrate when perm rating matters and when it does not, the impact of roof membrane color and the risks of “cool roofing,” and when HT (high-temp) rated membranes are actually required.
Learning Objectives:

Learn climate-specific design strategies for durable construction.
Learn to avoid common mistakes that can lead to mold, rot, mildew, corrosion and decay.
Understand how hygrothermal modeling can be used in the design process to ensure durability.
Learn how material properties (permeability, heat capacity, density, conductivity, and porosity) impact wall assemblies.

Register Now
Keith Simon, FAIA, CPHC, BECxP, CxA+BE, LEED AP, CEI, VP, Design Phase Services, Salas O’Brien
An expert in building enclosure technology, Keith Simon addresses the critical and often unmet need for ensuring and improving building performance, resilience, and durability by guiding design teams, educating future architects, and facilitating interdisciplinary exchange. With more than 20 years of experience in the industry, Keith is Vice President of Design Phase Services at Salas O’Brien. Additionally, he serves as the Chair and Founder of the Austin Building Enclosure Council, Vice Chair of the NIBS Building Enclosure Technology and Environment Council (BETEC), Scholarships Chair for the Society of Building Science Educators (SBSE) and has been adjunct faculty at the University of Texas School of Architecture since 2011.

ABAA QAP Committee Meeting
2026-02-17 11:00 - 12:00, 2026-03-03 15:00 - 16:00

ABAA Nominating Committee Meeting
2026-02-18 11:00 - 12:00

AIA Tampa Bay BEC Tampa Bay Air Barrier Symposium
2026-02-19 09:00 - 14:30 | Center for Architecture and Design Tampa Bay, 1208 North Howard Ave, Tampa Bay, FL, 33607, United States
Preventing Moisture Failure in Building Envelopes: Design, Construction & Field-Testing Strategies
Earn up to 4.5 LU/HSW
Register Today
Program Agenda
8:00 – 8:30 AM
Registration, Continental Breakfast & Welcome
8:30 – 9:30 AM
Air & Water Barrier Field Testing During Construction
Laverne Dalgleish, Executive Director, Air Barrier Association of America
This session reviews key methods for verifying air barrier performance during construction, including demonstrations of equipment and techniques used to measure air leakage, adhesion, and other material-specific tests to confirm compliance with project specifications.
9:30 – 9:40 AM
Break
9:40 – 10:40 AM
Building Envelope Case Study: From Initial Constructability Through Occupancy
Corey Zussman, AIA, NCARB
QA/QC Vice President, AECOM Hunt Construction
This case study follows a four-story university building from pre-bid constructability review through turnover, addressing air and vapor barriers, flashing, waterproofing, window installation, and roof transitions, with lessons learned from mock-ups, testing, and first-work-in-place reviews.
10:40 – 10:50 AM
Break
10:50 – 11:50 AM
It’s Not Raining—Why Is My Roof Leaking?
Laverne Dalgleish, Executive Director, Air Barrier Association of America
Moisture intrusion isn’t always caused by leaks. This session explores hidden moisture transport mechanisms, explains why perm ratings alone can be misleading, and demonstrates how water can enter assemblies—and how to prevent it.
11:50 AM – 12:00 PM
Break & Boxed Lunch Pickup
12:00 – 1:30 PM
Understanding Critical Transitions of Air, Vapor & Moisture Barriers
Corey Zussman, AIA, NCARB
QA/QC Vice President, AECOM Hunt Construction
This presentation identifies common critical transitions in complex building types and provides guidance on sequencing, detailing, and coordination to reduce constructability issues and potential rework, using drawings and construction photos from real-world installations.
Registration Fees:

Members: $30
Non-members: $50

Sponsorships Contact:
Tamara Foncerrada / tamara@airbarrier.org
Venue:
AIA Tampa Bay
Center for Architecture & Design, Tampa Bay
1208 North Howard Avenue
Tampa, FL 33607

ABAA Marketing Committee Meeting
2026-02-19 11:00 - 12:00

Electronic Leak Detection: Lessons Learned from ELD Testing & Continuous Monitoring 1.0 CEU/HSW
2026-02-19 13:00 - 14:00
Electronic Leak Detection: Lessons Learned from ELD Testing & Continuous Monitoring
This one hour course will cover the lessons learned from multiple case studies regarding Electronic Leak Detection (ELD) quality control testing as part of new construction, forensic testing in existing buildings with active leaks, and continuous moisture monitoring for conventional roofing. Participants will learn about the principles outlined in the ASTM Standard Guide D7877 and ASTM Standard Practice D8231 and will be able to identify common causes for moisture intrusion.
Learning Objectives:

Understand the science, capabilities and limitations of Electronic Leak Detection (ELD) as outlined in ASTM Guide D7877 & ASTM Practice D8231.
Recognize common causes of failures found in numerous types of roofing and waterproofing membranes.
Identify potential future design and construction failures based on analyzed data from real time construction monitoring.
Distinguish different applications for ELD testing and continuous moisture monitoring for risk mitigation and loss control.

Register Now
Shaun Katz, CSI, ASTM Member, Product Line Manager, Detec Systems
Shaun has over 20 years of experience in customer service and business administration. He has assisted facility/property managers and building owners, contractors, architects, engineers, consultants, and manufacturers with forensic leak investigation, as well as leak detection in new construction. He has performed ELD product demos and presentations throughout the world, and won the 2020 Presenter of the Year award from the Chicago Chapter of IIBEC. His goal is to provide a basic understanding of Electronic Leak Detection and to assist all parties with ensuring valid and conclusive ELD. He is an active member of CSI and IIBEC.

Virtual Training for ABAA Chairs
2026-02-20 10:00 - 11:00

ASI Board Meeting
2026-02-23 13:00 - 14:00

Online Self-Adhered & Fluid Applied Installer Certification Training Course
2026-02-24 10:00 - 2026-02-26 16:30
DEADLINE TO REGISTER IS FRIDAY, FEBRUARY 6, 2026
Download Registration Form
Online ABAA Training course
Physical installer manuals will be sent out. Those who register early will have a better chance of receiving their manual prior to the start of training. Having the manual for the online training modules is not required, but highly recommended to have before writing the exam.

DESCRIPTION:
This course is designed to teach experienced installers how to create an Air Barrier using Self-Adhered and Fluid Applied materials. This course includes instruction on everything from selecting proper materials, substrate preparation, application technology and troubleshooting.
More Information

Not an Installer?
ABAA courses are open to everyone and are a great training opportunity for all, including General Contractors, Suppliers, Manufacturers sales rep, Architectural Reps, and anyone in the construction industry. There is NO experience needed to attend one of our great training courses.

Interested in Certification?
Self-Adhered and Fluid Applied installer training is designed to teach experienced installers how to create an Air Barrier using Self Adhered and Fluid Applied materials. This course includes instruction on everything from selecting proper materials, substrate preparation, application technology, troubleshooting and hands-on training.
For certification purposes, a minimum of 3000 hours of work experience either directly with air barriers or in applicable related trade experience is required.
For companies seeking to become ABAA Accredited Contractor, it is ABAA policy that each company has at least 1 person trained in an ABAA Installer Training Course and certified as an ABAA Level 3 Installer, and at least 1 person trained in the Quality Assurance Program Administrator Course.

Questions?
Please email us at training@airbarrier.org
See you there!
Download Registration Form
COURSE BEGINS TUESDAY, FEBRUARY 24, 2026 AT 10:00AM ET. IF YOU DO NOT RECEIVE A CONFIRMATION EMAIL WITHIN 3 BUSINESS DAYS OF REGISTERING, PLEASE CONTACT US DIRECTLY.
DEADLINE TO REGISTER IS FRIDAY, FEBRUARY 6, 2026

ABAA Contractor Webinar: Air Barrier Installation and Quality Control Fundamentals
2026-02-25 11:00 - 12:00
Join us for an informative presentation that emphasizes the importance of proper air barrier application in enhancing building performance. Properly installed air barriers are critical in preventing air leakage, which can lead to energy inefficiencies, moisture issues, and compromised indoor air quality.
We will delve into best practices for air barrier application, highlighting the techniques that ensure continuity and effectiveness. Attendees will learn about common challenges faced during installation and the vital role of quality control in maintaining the integrity of the air barrier system.
Through real-world project photo’s, we’ll illustrate key application requirements for a variety of air barrier materials and exactly what to look for when performing quality control and site-testing.
This webinar is exclusive to the ABAA contractor members. Please reach out to lhardman@airbarrier.org to register.

ABAA ExCom Meeting
2026-02-26 10:00 - 11:00

Prefabricated Exterior Wall Assemblies: Herding Cats in Hard Hats 1.0 CEU/HSW
2026-02-26 13:00 - 14:00
Prefabricated Exterior Wall Assemblies: Herding Cats in Hard Hats
Prefabrication of exterior wall assemblies has been explored since the 1920s and 1930s, so the concept of their use is nothing new to the built environment. Today, the construction industry’s focus is ensuring continuity of air, water, and thermal barriers—regardless of whether wall assemblies are built in the field or in a shop. Prefabricated exterior wall systems are designed to meet these requirements. This presentation will introduce perspectives from both a General Contractor involved in delegated design and a building enclosure consultant who reviews design, fabrication, and installation. Case studies will highlight code and industry inspection requirements, review processes, and lessons learned in coordinating prefabricated assemblies with other trades. Presenters will include Colton Howard with Terracon supporting Kayla Maines, and we plan to bring in a prefabrication manufacturer to share their viewpoint.
Learning Objectives:

Describe the history and different types of prefabricated exterior wall panels.
Contracting and coordinating the delegated design process with the applicable trade partners. Turn-Key, Means & Methods, and who owns the details?
Review applicable codes and standards and methods for testing and inspecting these assemblies.
Demonstrate the process of designing and construction of the prefabricated exterior wall assembly and how it incorporates the air, thermal and water barriers within it.

Register Now
Kayla Maines, AIA, Senior Architect, Terracon Consultants, Inc,
Kayla Maines joined Austin Terracon-Facilities in May of 2018. She is a Registered Architect in the state of Texas and Oklahoma, Legacy LEED AP, and Building Enclosure Commissioning Provider (BECxP) and a Commissioning Authority +Building Enclosure (CxA+BE) She has 17 years of experience that includes managing projects from Schematic Design through Construction Administration, multidiscipline coordination, peer reviews, design assistance, building assessments, reviews submittals and shop drawings, performs field observations and building enclosure testing, historic preservation, and building enclosure commissioning. Kayla was the 2020 Chair of the Austin Building Enclosure Council (BEC: Austin) and currently serves as a board member for BEC: Austin. She also serves as the Secretary of the Austin Construction Specification Institute (CSI). Mrs. Maines is a Terracon Subject Matter Expert (SME) for Building Enclosure Commissioning (BECx) and an Authorized Project Review (APR).

Trevor Brown, Regional Quality Director, JE Dunn
Trevor has been with JE Dunn Construction for 18 years and has dedicated 25 years to the Construction Quality profession. As an experienced Quality Director, he has a proven track record in the construction industry, showcasing his expertise in Building Envelope Design, Constructability Reviews, Mock-ups, Construction Processes, Pre-construction Activities, Team Leadership, Teaching/Training, and Contract Management. Trevor is a highly skilled quality assurance professional, holding Special Inspector Certifications focused on the International Building Code and other industry certifications specializing in building envelope systems, testing, and performance. He is a respected member of the building enclosure community. Acting as technical resource for building envelope design, construction, and code compliance.

Colton Howard, CEI, Senior Facilities Professional, Terracon Consultants, Inc.
Colton is a Senior Facilities professional in Terracon’s Austin, Texas office. He performs investigative testing and surveys of roofing and waterproofing components to identify deterioration and probable sources of water infiltration, generates reports of observations and findings with recommendations and cost estimates, and design repairs and renovations for building envelopes. Colton also oversees the different ASTM and AAMA standard tests or specialized testing. Colton also performs peer reviews of drawings and specifications and provides bid phase project management and construction phase project management services.
Colton has managed and overseen all phases of new and existing construction projects; commercial, remedial, residential structures, schools, historic rehabilitation, observation, reporting, and forensic investigation and installation of roof and exterior waterproofing and wall systems. He has also performed design surveys, peer reviews, bidding and award, construction administration, observation and reporting, and close-out documents in accordance with the RCI Manual of Practice. Colton also consults with architects and engineers recommending materials, applications, and design support, and trains new personnel.

ABAA Technical Committee Meeting
2026-02-26 15:00 - 16:00

Deciphering the Complexity of Adhered Veneer Wall Systems 1.0 CEU/HSW
2026-03-05 13:00 - 14:00
Deciphering the Complexity of Adhered Veneer Wall Systems
Adhered veneer cladding systems have gained popularity in the past decade with increased use in all climates across the county. Today this type of construction is not only seen on high-end residential, but a common facade element on educational institutions, hospitals, airports and other commercial type buildings. While adhered veneer wall system have garnered the derogatory “lick and stick” label and are historically seen as economical, value engineering options, these systems have evolved significantly, as well as the codes and standards used to design and construct them. With the increased complexity of adhered veneer systems, deciphering the multiple building codes, standards, industry guidelines, and manufacturer’s installation instructions can be challenging. Drawing on WJE’s extensive experience investigating failures of these systems, this presentation will highlight code-compliance pathways, key resources available for design and construction, and general strategies to achieve a successful adhered veneer installation; inclusive of field testing and evaluation strategies.
Learning Objectives:

List the design requirements between prescriptive design versus engineered design for adhered veneer systems
Identify industry guides and standards (i.e., ASTM/ANSI) related to adhered veneer products and installation of adhered veneers.
Describe at least three of the most common failure mechanisms of adhered veneer systems.
Summarize key quality control steps to consider during construction that can lead to a successful installation.

Register Now
Renae Kwon, Register Architect (IL, WI, AZ, IN), Associate Principal, Wiss, Janney, Elstner Associates, Inc
Renae Kwon is an Associate Principal with the interdisciplinary engineering, architecture, and material science consulting firm of Wiss, Janney, Elstner Associates Inc. Ms. Kwon is a licensed architect, with experience in repair and rehabilitation of various types of facades and building envelopes as well as design peer review of building enclosure for new construction. Her focus of materials includes masonry, stone and windows of both contemporary and historical structures.

ABAA, BEC Minnesota & CSI Minneapolis-St. Paul Full Day Symposium
2026-03-10 09:30 - 16:00 | Boy Scouts of America Base Camp, 6202 Bloomington Rd, Fort Snelling, MN, 55111, United States
ABAA in partnership with BEC Minnesota and CSI Minneapolis – St. Paul Full Day Air Barrier Symposium
Earn up to 4.0 LU/HSW
Register Today
Program Agenda
8:00 – 8:30 AM
Registration, Breakfast, & Networking
8:30 – 9:30 AM
Building Enclosure Architectural Details: Conveying Construction Drawing Clarity, 1.0 LU/HSW
Melissa Payne, BECxP, CxA+BE, CDT, BE Consulting – Forensics, Midwest Enclosure Consulting
Incomplete or unclear drawings often lead to performance issues in the field. This session reviews building science fundamentals and shows how to improve detail clarity at foundations, roofs, windows, penetrations, and material transitions to support durable, energy-efficient enclosures.
10:30 – 11:30 AM
Self-Adhered Membrane Applications: What Does It Really Mean to Stick? 1.0 LU/HSW
Cody Shelner, PE, Head of Marketing, Air & Waterproofing, tesa Air and Waterproofing
Self-adhered membranes are popular for their ease of use and reliability in air and moisture control. However, performance depends on more than peel adhesion. This session reviews the forces these membranes must resist—wind, stack effect, and pressurization—and explores how to properly evaluate long-term durability under real conditions. Learn why comprehensive performance testing is essential when specifying or inspecting these systems.
11:30AM – 12:30 PM
Lunch
12:30 – 1:30 PM
Locating That Elusive Point of Condensation: A Review of Hygrothermal Evaluation Fundamentals, 1.0 LU/HSW
Andrew Dunlap, AIA, NCARB, LEED AP, Vice President | Building Technology Studio Leader, SmithGroup
This presentation will review the various types of Hygrothermal modeling tools available to assistance designers in developing a building’s exterior enclosure. Variables such as the interior and exterior climate (temperature/humidity), material permeance, wall assembly types, and transitions between adjacent construction will be explored. Understanding the impact of the decision to use various modeling techniques such as 1D/2D/3D and transient versus static modeling will be discussed.
1:30 – 2:00 PM
Break
2:00 – 3:00 PM
Failure is Not an Option: Air Barrier Continuity Strategies for Storefront & Curtain Wall Systems, 1.0 LU/HSW
Andrew Dunlap, AIA, NCARB, LEED AP, Vice President | Building Technology Studio Leader, SmithGroup
Wall-to-window transitions are a leading source of enclosure failures. This session provides a step-by-step look at sequencing and connection details, supported by real-world photos, to ensure airtight, watertight, and thermally protected assemblies.
3:00 PM
Teardown & Adjourn
Registration Fees:

BEC & CSI Members: $50
Non-members: $75

Sponsorships Contact:
Tamara Foncerrada / tamara@airbarrier.org
Venue:
Boy Scouts of America Base Camp
6202 Bloomington Rd.
Fort Snelling, MN 55111

ABAA Jury of Fellows Meeting - CANCELLED
2026-03-10 12:00 - 13:00

ABAA Contractors Committee Meeting
2026-03-10 15:00 - 16:00

Elevating Enclosure Performance: Optimizing Continuous Insulation for Thermal Efficiency, Durability, and Safety 1.0 CEU/HSW
2026-03-12 13:00 - 14:00
Elevating Enclosure Performance: Optimizing Continuous Insulation for Thermal Efficiency, Durability, and Safety
This webinar explores how strategic continuous insulation (CI) choices can alleviate pressures on building enclosures and elevate building envelope performance, sustainability, durability, and life safety. Attendees will gain insights into NFPA 285 compliance, the role of CI in rainscreen systems, and key considerations behind insulation material selection. The course highlights key attributes for comparing insulation types—such as R-value, thickness, installation requirements, and environmental impact—and suggests design opportunities using higher-performance insulation products. Through real-world assemblies and best practices, participants will learn how to simplify insulation choices across multiple applications to meet evolving codes, optimize wall assemblies, reduce thermal bridging, and even reclaim interior square footage. Discover how doing more with less supports design efficiency and construction practicality.
Learning Objectives:

Identify how insulation selection impacts NFPA 285 compliance and understand how different assemblies perform with various continuous insulation materials under varying environmental pressures.
Evaluate sustainability attributes, installation efficiencies, and design flexibility of continuous insulation types to maximize thermal performance and minimize installation complexity.
Explore rainscreen applications and determine critical design and installation considerations for effectively integrating continuous insulation across varied enclosure types.
Examine how high R-value insulation can reduce wall thickness, simplify attachment systems, and reclaim usable space within building envelopes.

Register Now
Lance Williams, Architectural Sales Manager, Atlas Roofing
Lance Williams is an Architectural Sales Manager focused on how today’s enclosure choices shape tomorrow’s buildings. Drawing on more than 20 years in commercial walls and continuous insulation, he brings a long-view perspective on performance, risk, and carbon grounded in building science and real-world application realities. He’s known for framing complex envelope decisions in ways that resonate with owners, designers, and builders alike.
