IIBEC Chicago Area Chapter Annual Meeting
2026-01-14 08:00 - 19:00 (America/Detroit)
The Chicago Area Chapter of the International Institute of Building Enclosure Consultants (CAC) will be conducting our Annual Meeting and Program on Wednesday, January 14, 2026. Agenda below.
Attendees will receive 6 IIBEC CEH and 2 AIA LU. **If you attended the “Failure is Not an Option” by Allison McSherry and Brian Mathus of K&H at the BES in October, then you are eligible for only 5 CEH**
The event will be followed by a cocktail reception and presentation of IIBEC-CAC awards.
IIBEC-Chicago Area Chapter Annual Meeting and Winter Program Agenda
Wednesday, January 14, 2026
Hyatt at 2715 Jorie Blvd, Oak Brook, IL 60523

Time
Event

7:00-8:00AM
Registration, Continental Breakfast, Table-top Exhibits, and Networking

8:00-8:15AM
Welcome, Announcements, and Table-Top Exhibitor Introductions

8:15-9:15AM
Tech Session #1: “Designing Against Wind Uplift: Best Practices for Paver and Vegetated Assemblies” by John Hamati of Eco Building Solutions

9:15-10:15AM
Tech Session #2: “Expansion Joint Complexities within Elevated Planters and Paver Plazas” by Lurita Blank and David Fortino of Raths, Raths & Johnson, Inc.

10:15-10:40AM
Mid-morning Break and Table-top Exhibits

10:40-11:40AM
Tech Session #3: “What the Heck are Air Barriers, Vapor Barriers, and Water-Resistive Barriers?” by Laverne Dalgleish of ABAA

11:40-11:50AM
CRCA Update and Trade Show by Troy Wormley of CRCA

11:50-12:00PM
IIBEC Region III Update by Charles Sietmann, Region III Director

12:00-1:00PM
Luncheon

1:00-2:00PM
Tech Session #4: “Commercial Low-slope Roof Design and Installation – 10 (Roof System) Things to Think About in 2026” by Jason Wilen of Klein & Hoffman [AIA 1.0 LU]

2:00-3:00PM
Tech Session #5: “ Rooftop & Building Envelope Ice and Snow Management” by David Dellal of Floe

3:00-3:30PM
Mid-afternoon Break and Table-top Exhibits

3:30-4:30PM
Tech Session #6: “Failure is Not an Option” by Allison McSherry and Brian Mathus of Klein & Hoffman**

4:30-4:45PM
Chapter Business

4:45-6:00PM
IIBEC-Chicago Area Chapter Awards and Cocktail Reception Sponsored by Table-Top Exhibitors

Learn More/Attend

2026 CRCA Trade Show & Seminars
2026-01-14 10:00 - 2026-01-16 17:00
2026 CRCA TRADE SHOW & SEMINARS SCHEDULE
WEDNESDAY, JANUARY 14:

​5 pm – Roofing Week in Chicago: Kick-off Cocktail Party at the Hilton Suites (Requires Advance Registration)

THURSDAY, JANUARY 15:

11 am – 5 pm Trade Show Exhibitor Hours
9 – 11 am – CRCA’s Roofing Week in Chicago Keynote Breakfast: State of the Industry: Key Legal and Policy Issues Affecting Contractors (Trent Cotney, Adams & Reese LLP) ($60 per member, $90 per non-member – $30 to Roof Consultants, Code Officials, and Specifiers/Architects – Requires Advance Registration)
12 – 1 pm – What the Heck are Air Barriers, Vapor Barriers, and Water Resistive Barriers?(Laverne Dalgleish, Air Barrier Association of America)
1:30 – 2:30 pm – I Wouldn’t Do That If I Were You (Matt Dupuis, SRI Consultants)
3 – 4 pm – Growing a Sales Team (Ben Christiansen, GAF Materials Corporation)

FRIDAY, JANUARY 16:

9 am – 1 pm Trade Show Exhibitor Hours
7 – 9 am – Safety Leadership & Soft Skills for a Resilient Workplace (Frank Marino, Safety Check)
9:30 – 10:30 am – Case Law Update: Lessons and Legal Insights for Contractors (Trent Cotney, Adams & Reese LLP)
11:30 am – 12:30 pm – Low Slope Technical Update (Mark Graham, NRCA)

Learn more/Attend

Navigating the Complexities of Expansion Joint System Installation for Stadium Construction 1.0 CEU/HSW
2026-01-15 13:00 - 14:00
Navigating the Complexities of Expansion Joint System Installation for Stadium Construction
The installation of expansion joint systems in stadium construction presents unique challenges due to the structural demands and operational requirements of these large-scale venues. This presentation will explore the technical intricacies associated with planning, coordinating, and executing expansion joint system installations with particular emphasis on the critical role of effective interfacing with various substrates and the extensive logistical coordination required for a seamless, water-tight installation. Key discussion points will include the process of ensuring proper preparation and alignment with various substrates, which are often subject to irregularities and environmental conditions that could impact the performance and longevity of the joint systems. This presentation will reference a confidential new NFL stadium on the East Coast and analyze the importance of pre-installation assessment, surface preparation, and substrate compatibility in addressing and/or minimizing issues that could lead to system failure or compromised system integrity.
Learning Objectives:

Identify the Role and Importance of Expansion Joint Systems in Large-Scale Stadium Projects
Examine Best Practices for Interfacing Expansion Joints with Concrete Substrates
Analyze Logistical and Sequencing Challenges in Expansion Joint Installation
Identify Common Types of Expansion Joint Materials and Installation Challenges

Register Now
Jack Belanger, Vice President, MTN Inc.
Jack Belanger is a Vice President for MTN Inc., a national Division-7 waterproofing and specialty contractor. Jack brings over 20 years of experience in commercial construction ranging from maintaining and extending useful lives of new commercial buildings and structures to performing restoration aspects of commercial structures while utilizing leading technologies to ensure building envelope continuity. Jack is proficient in various technologies including below-grade waterproofing systems, expansion joint systems, above-grade air/vapor barriers, joint sealants, commercial roofing systems, traffic coatings, epoxy coatings, and hot- and cold- applied waterproofing.

ABAA Board of Directors Meeting
2026-01-16 10:00 - 11:00
Conference Call
All times shown are in Eastern Time Zones

ABAA ASI Ad Hoc Group Meeting
2026-01-16 11:00 - 12:00, 2026-01-23 11:00 - 12:00, 2026-01-30 11:00 - 12:00, 2026-02-06 11:00 - 12:00, 2026-02-13 11:00 - 12:00, 2026-02-20 11:00 - 12:00

ABAA QAP Committee Meeting
2026-01-16 14:00 - 15:00, 2026-02-17 11:00 - 12:00

Air Barrier Embodied Carbon: A Critical Review 1.0 CEU/HSW
2026-01-22 13:00 - 14:00
Air Barrier Embodied Carbon: A Critical Review
The session will start with a review of embodied carbon impacts applied to air barriers. This will include a comparison of published air barrier embodied carbon values, varying assessment methodologies, and their limitations. A recommended approach of evaluating embodied carbon impacts based on clear field and linear/point impacts similar to modern thermal performance analysis will be presented. The impacts of this approach will be illustrated using example building envelope assemblies. A number of common project air barrier considerations will be discussed including: the use of membranes under exterior spray foam applications, the use of liquid applied air barriers on masonry when applying interior fibrous insulation, and the use of loose sheet vs liquid applied or self-adhered air barriers. This session will be of interest to a range of participants: manufacturer’s will be interested in the review of environmental product declarations (EPDs) and how it may affect their systems; professionals will be interested in the insights and approaches offered and application to their practices in selecting systems and reporting embodied carbon impacts. The session be a great targeted introduction for contractors and others in the industry with an interest in embodied carbon applications to their field of work.
Learning Objectives:

Identify the embodied carbon impact stage for air barrier
Determine Clear Field vs Linear Impacts
Illustrate the impact of air barrier on the embodied carbon of building envelope assemblies
Identify the impacts of common air barrier strategy selections

Register Now
Dr. Randy Van Straaten, PhD, P.Eng, President, Building Science Specialist, Building Enclosure Labs, Inc
Dr. Randy Van Straaten is the President and a Building Science Specialist at Building Enclosure Labs Inc. (BELi) in London, Ontario. Previously, Randy worked at RDH Building Science, where he managed their life cycle analysis services. Randy recently completed a life cycle assessment study for BC Housing and has been lecturing on sustainability, with a focus on operating and embodied carbon of building envelopes. He recently taught Building Science for Retrofits at George Brown College and Building Performance at Toronto Metropolitan University.

Online Self-Adhered & Fluid Applied Installer Certification Training Course
2026-01-27 10:00 - 2026-01-29 16:30
DEADLINE TO REGISTER IS FRIDAY, JANUARY 9, 2026
Download Registration Form
Online ABAA Training course
Physical installer manuals will be sent out. Those who register early will have a better chance of receiving their manual prior to the start of training. Having the manual for the online training modules is not required, but highly recommended to have before writing the exam.

DESCRIPTION:
This course is designed to teach experienced installers how to create an Air Barrier using Self-Adhered and Fluid Applied materials. This course includes instruction on everything from selecting proper materials, substrate preparation, application technology and troubleshooting.
More Information

Not an Installer?
ABAA courses are open to everyone and are a great training opportunity for all, including General Contractors, Suppliers, Manufacturers sales rep, Architectural Reps, and anyone in the construction industry. There is NO experience needed to attend one of our great training courses.

Interested in Certification?
Self-Adhered and Fluid Applied installer training is designed to teach experienced installers how to create an Air Barrier using Self Adhered and Fluid Applied materials. This course includes instruction on everything from selecting proper materials, substrate preparation, application technology, troubleshooting and hands-on training.
For certification purposes, a minimum of 3000 hours of work experience either directly with air barriers or in applicable related trade experience is required.
For companies seeking to become ABAA Accredited Contractor, it is ABAA policy that each company has at least 1 person trained in an ABAA Installer Training Course and certified as an ABAA Level 3 Installer, and at least 1 person trained in the Quality Assurance Program Administrator Course.

Questions?
Please email us at training@airbarrier.org
See you there!
Download Registration Form
COURSE BEGINS TUESDAY, JANUARY 27, 2026 AT 10:00AM ET. IF YOU DO NOT RECEIVE A CONFIRMATION EMAIL WITHIN 3 BUSINESS DAYS OF REGISTERING, PLEASE CONTACT US DIRECTLY.
DEADLINE TO REGISTER IS FRIDAY, JANUARY 9, 2026

ABAA Contractor Webinar: Mock Ups - The "Crash Test Dummy" for Building Enclosure
2026-01-28 11:00 - 12:00
This presentation will review why enclosures are critical for energy efficiency, sustainability and durability, and explain how every building is unique. We will then review and discuss the advantages/disadvantages of the various types of mock ups, using examples from actual projects, along with discussing various industry performance tests and standards typically performed on Functional or tested mock ups.
The last part of the presentation will review and provide ideas on how to take the Lessons Learned from the mock and use that information as an on-site training for the tradesmen whom will be installing the enclosure for that project.
This webinar is exclusive to the ABAA contractor members. Please reach out to lhardman@airbarrier.org to register.

Dispelling the Myths about Building Enclosure Warranties 1.5 CEU/HSW
2026-01-29 13:00 - 14:30
Dispelling the Myths about Building Enclosure Warranties
Building Envelope System Warranties are becoming more sought after and bring some real value to a building owner – they help manage risk and obtain peace of mind. What constitutes a building enclosure system warranty? Can such a warranty be attained under one umbrella of coverage? Our industry understands how critical it is to ensure building enclosure protection from water, air, and thermal intrusion, at every level, and at every transition, but is our industry ready for shift in practices to make this a reality for building owners? In a world aiming to minimize financial exposure, system warranties are a good option. But are they really that simple to specify and implement? Join us to learn more about building enclosure system warranties, the value they bring, what they are, how to specify them, and what to look out for during the build process.
Learning Objectives:

Explain the scale and causes of building enclosure failures as a billion-dollar annual issue and describe why performance specifications – defining performance, functional, and technical requirements – are essential to reducing these failures.
Identify and interpret key contract terms, conditions, and warranties, and analyze how they assign responsibilities among parties and outline remedies in cases of claims or breaches.
Differentiate between full system warranties, component warranties, and workmanship warranties, and evaluate how full building envelope warranties align with Building Code compliance and the performance expectations of components that are moderately difficult to access or replace.
Distinguish the coverage terms of various whole building envelope warranties and apply this understanding to appropriately incorporate warranty requirements into project specifications

Register Now
Melissa Payne, BECxP, CxA+BE, CDT, Owner, Midwest Enclosure Consulting, LLC
Melissa I. Payne is the founder of Midwest Enclosure Consulting (est. 2022), providing third-party building enclosure consulting, forensic investigations, performance assessments, and onsite inspections. She previously led Tremco CPG’s Enclosure System Solutions Team and administered the MyTEAM Leak-Free Warranty program, and before that managed building enclosure commissioning and consulting services at Miller Engineering after serving as an Owner’s Representative for City Utilities of Springfield.With broad experience in building science, commissioning, construction observation, and detail development across multiple building types, Ms. Payne is known for improving collaboration and reducing risk in design and construction. A nationally recognized speaker, she is an active member of SWMO-CSI, ICC, NIBS, BEC-OR (Past Chair), BETEC, ABAA, and IIBEC, and is a published author in Interface magazine.

Corey Zussman, AIA, NCARB, ALA, CABS, QA/QC Vice President, AECOM Hunt
As a forensic architect registered in several states, Corey Zussman has practiced in the construction industry for more than 30 years. He specializes in the building envelope, restoration, preservation, life safety, and interior finishes. While working on over 2000 projects, Corey conducts constructability reviews, pre-installation meetings, comprehensive envelope meetings, and construction observations. He has also become known for providing educational opportunities throughout the industry and has produced more than 200 “lessons learned” papers. Topics include building envelope and life safety concerns, enabling Corey to proactively address issues during design review, pre-construction, and construction. In addition, he has over 15 industry articles about building envelope, life safety, and interior topics. He is also a frequent presenter at local and national conferences and associations with over 60 AIA accredited presentations.

Amy Baker, AIA, LEED AP, Specifications Writer, Amy Baker Architect
Amy Baker is a Registered Architect and Specifications Consultant with over 20 years of experience in commercial construction. She specializes in the technical development of projects with a passion for enclosure detailing, building science, codes, and specifications. Amy is pleased to serve on the Board of Directors for the Building Enclosure Council (BEC-GD), the Detroit Chapter of the Construction Specifications Institute (CSI), Specification Consultants in Independent Practice (SCIP), and the Air Barrier Association of America (ABAA). She is also on RIB SpecLink’s Product Innovation Advisory Board, where she contributes ideas for improving the functionality of one of the leading spec writing platforms in North America. Amy holds two degrees from Lawrence Technological University, where she has been recognized as the university’s 26th Distinguished Architecture Award Recipient.

Taking the Air (Barrier) Out of ASHRAE 90.1 - with a Taste of MN Hotdish 1.0 CEU/HSW
2026-02-05 13:00 - 14:00
Taking the Air (Barrier) Out of ASHRAE 90.1 – with a Taste of MN Hotdish
The 2021 International Energy Conservation Code (IECC) adopted ASHRAE Standard 90.1-2019, which includes mandatory requirements for air barriers. This session will explore key topics such as Whole-Building Air Leakage and Continuous Air Barrier Design and Installation—both essential components of the compliance path. Our speaker, Pam Jergenson from Minnesota, will guide attendees on the pathway through the air barrier provisions in ASHRAE 90.1-2019 and highlight Minnesota-specific amendments that may resemble your local code. And since it’s at the lunch hour, we’ll serve up those code insights with a side of cozy Minnesota hotdish flavor!
Learning Objectives:

Know the starting point and path through ASHRAE Standard 90.1-2019 for air barrier materials and systems during the design and construction phases.
Understand specific Minnesota amendments to the air barrier part of the standard, their impact, and what could be in your code.
Know Section 5, Building Envelope; specifically, the Compliance Paths, Mandatory Provisions, Submittals, Products, and Inspection and Verification for air barriers.
Analyze 5.4.3.1.1, Whole-Building Air Leakage, describing the Exceptions and the Minnesota amendment to the Exceptions that may be similar to your region.

Register Now
Pamela Jergenson, FCSI, CDT, CCS, CCCA, BECxP, CxA+BE, CABS, Technical Director of Building Science Solutions, Intertek
Ms. Jergenson is a Technical Director of Building Science Solutions at Intertek. Pam is a Certified Construction Specifier (CCS) and Certified Construction Contract Administrator (CCCA) from Construction Specifications Institute (CSI), Building Enclosure Commissioning Process Provider (BECxP) and Accredited Commissioning Authority + Building Enclosure (CxA+BE) from University of Wisconsin-Madison, ABAA Licensed Field Auditor and Certified Speaker with Air Barrier Association of America (ABAA), and Advanced Communicator Gold and Advanced Leader Bronze with Toastmasters International. She has over 35 years in construction with nearly 30 years in investigation, survey, design, construction observation, and construction contract administration of new and existing building enclosure projects; with expertise in exterior walls.

ABAA Conference Committee Meeting
2026-02-09 11:00 - 12:00

ABAA & AIA/BEC San Antonio Lunchtime CE
2026-02-11 12:30 - 15:15
ABAA in partnership with BEC San Antonio
Earn up to 2.0 LU/HSW
Register Here
Program Agenda
11:30 AM – 12:00 PM
Registration, Sign-In & Welcome
12:00 PM – 1:00 PM
Building Enclosure Pre-Construction Meetings
Presenter: Brian Stroik
1.0 LU/HSW
Pre-construction meetings are a critical component of effective quality assurance and should be clearly specified in the project manual. These meetings align owners, designers, contractors, and manufacturers on performance expectations, installation practices, sequencing, and warranty requirements before work begins. This session outlines how to structure effective pre-construction meetings to identify and resolve issues early, encourage collaboration, and reduce risk, delays, and construction-related failures.
1:00 PM – 1:15 PM
Break
1:15 PM – 2:15 PM
Through-Wall Flashings & Transition Membranes: Selection and Installation
Presenter: Craig Wetmore
1.0 LU/HSW
Effective water management depends on the proper integration of through-wall flashings with air barriers, weather-resistive barriers, and insulation systems. This session reviews common flashing types, material compatibility considerations, and key installation principles required to ensure continuity and drainage. Real-world project examples will highlight best practices for durable, high-performing transitions.
2:15 PM
Wrap-Up & Adjournment
Registration Fees:

AIA, Associate AIA Members: $15
Non-members: $25

Venue:
AIA San Antonio
1344 S. Flores Street
San Antonio, TX 78204

ABAA Contractors Committee Meeting (CXLD)
2026-02-11 15:00 - 16:00

Building Enclosures Durability Analysis with Hygrothermal Modeling 1.0 CEU/HSW
2026-02-12 13:00 - 14:00
Building Enclosures Durability Analysis with Hygrothermal Modeling
Hygrothermal modeling, the analysis of heat and moisture transport through building enclosure assemblies, reveals many of the climate-specific building science secrets that are key to durable design of walls and roofs and other assemblies. Debunking rules of thumb and avoiding answers of “it depends” – data and analysis can reveal exactly how many inches of a certain insulation are required, exactly what perm-rating will optimize an assembly, and what kind of havoc a reservoir cladding system can create. Case studies will be shown that demonstrate when perm rating matters and when it does not, the impact of roof membrane color and the risks of “cool roofing,” and when HT (high-temp) rated membranes are actually required.
Learning Objectives:

Learn climate-specific design strategies for durable construction.
Learn to avoid common mistakes that can lead to mold, rot, mildew, corrosion and decay.
Understand how hygrothermal modeling can be used in the design process to ensure durability.
Learn how material properties (permeability, heat capacity, density, conductivity, and porosity) impact wall assemblies.

Register Now
Keith Simon, FAIA, CPHC, BECxP, CxA+BE, LEED AP, CEI, VP, Design Phase Services, Salas O’Brien
An expert in building enclosure technology, Keith Simon addresses the critical and often unmet need for ensuring and improving building performance, resilience, and durability by guiding design teams, educating future architects, and facilitating interdisciplinary exchange. With more than 20 years of experience in the industry, Keith is Vice President of Design Phase Services at Salas O’Brien. Additionally, he serves as the Chair and Founder of the Austin Building Enclosure Council, Vice Chair of the NIBS Building Enclosure Technology and Environment Council (BETEC), Scholarships Chair for the Society of Building Science Educators (SBSE) and has been adjunct faculty at the University of Texas School of Architecture since 2011.

ABAA Nominating Committee Meeting
2026-02-18 11:00 - 12:00

AIA Tampa Bay BEC Tampa Bay Air Barrier Symposium
2026-02-19 09:00 - 14:30 | Center for Architecture and Design Tampa Bay, 1208 North Howard Ave, Tampa Bay, FL, 33607, United States
Preventing Moisture Failure in Building Envelopes: Design, Construction & Field-Testing Strategies
Earn up to 4.5 LU/HSW
Register Today
Program Agenda
8:00 – 8:30 AM
Registration, Continental Breakfast & Welcome
8:30 – 9:30 AM
Air & Water Barrier Field Testing During Construction
Laverne Dalgleish, Executive Director, Air Barrier Association of America
This session reviews key methods for verifying air barrier performance during construction, including demonstrations of equipment and techniques used to measure air leakage, adhesion, and other material-specific tests to confirm compliance with project specifications.
9:30 – 9:40 AM
Break
9:40 – 10:40 AM
Building Envelope Case Study: From Initial Constructability Through Occupancy
Corey Zussman, AIA, NCARB
QA/QC Vice President, AECOM Hunt Construction
This case study follows a four-story university building from pre-bid constructability review through turnover, addressing air and vapor barriers, flashing, waterproofing, window installation, and roof transitions, with lessons learned from mock-ups, testing, and first-work-in-place reviews.
10:40 – 10:50 AM
Break
10:50 – 11:50 AM
It’s Not Raining—Why Is My Roof Leaking?
Laverne Dalgleish, Executive Director, Air Barrier Association of America
Moisture intrusion isn’t always caused by leaks. This session explores hidden moisture transport mechanisms, explains why perm ratings alone can be misleading, and demonstrates how water can enter assemblies—and how to prevent it.
11:50 AM – 12:00 PM
Break & Boxed Lunch Pickup
12:00 – 1:30 PM
Understanding Critical Transitions of Air, Vapor & Moisture Barriers
Corey Zussman, AIA, NCARB
QA/QC Vice President, AECOM Hunt Construction
This presentation identifies common critical transitions in complex building types and provides guidance on sequencing, detailing, and coordination to reduce constructability issues and potential rework, using drawings and construction photos from real-world installations.
Registration Fees:

Members: $30
Non-members: $50

Sponsorships Contact:
Tamara Foncerrada / tamara@airbarrier.org
Venue:
AIA Tampa Bay
Center for Architecture & Design, Tampa Bay
1208 North Howard Avenue
Tampa, FL 33607

ABAA Marketing Committee Meeting
2026-02-19 11:00 - 12:00

Electronic Leak Detection: Lessons Learned from ELD Testing & Continuous Monitoring 1.0 CEU/HSW
2026-02-19 13:00 - 14:00
Electronic Leak Detection: Lessons Learned from ELD Testing & Continuous Monitoring
This one hour course will cover the lessons learned from multiple case studies regarding Electronic Leak Detection (ELD) quality control testing as part of new construction, forensic testing in existing buildings with active leaks, and continuous moisture monitoring for conventional roofing. Participants will learn about the principles outlined in the ASTM Standard Guide D7877 and ASTM Standard Practice D8231 and will be able to identify common causes for moisture intrusion.
Learning Objectives:

Understand the science, capabilities and limitations of Electronic Leak Detection (ELD) as outlined in ASTM Guide D7877 & ASTM Practice D8231.
Recognize common causes of failures found in numerous types of roofing and waterproofing membranes.
Identify potential future design and construction failures based on analyzed data from real time construction monitoring.
Distinguish different applications for ELD testing and continuous moisture monitoring for risk mitigation and loss control.

Register Now
Shaun Katz, CSI, ASTM Member, Product Line Manager, Detec Systems
Shaun has over 20 years of experience in customer service and business administration. He has assisted facility/property managers and building owners, contractors, architects, engineers, consultants, and manufacturers with forensic leak investigation, as well as leak detection in new construction. He has performed ELD product demos and presentations throughout the world, and won the 2020 Presenter of the Year award from the Chicago Chapter of IIBEC. His goal is to provide a basic understanding of Electronic Leak Detection and to assist all parties with ensuring valid and conclusive ELD. He is an active member of CSI and IIBEC.

Virtual Training for ABAA Chairs
2026-02-20 10:00 - 11:00

ASI Board Meeting
2026-02-23 13:00 - 14:00

Online Self-Adhered & Fluid Applied Installer Certification Training Course
2026-02-24 10:00 - 2026-02-26 16:30
DEADLINE TO REGISTER IS FRIDAY, FEBRUARY 6, 2026
Download Registration Form
Online ABAA Training course
Physical installer manuals will be sent out. Those who register early will have a better chance of receiving their manual prior to the start of training. Having the manual for the online training modules is not required, but highly recommended to have before writing the exam.

DESCRIPTION:
This course is designed to teach experienced installers how to create an Air Barrier using Self-Adhered and Fluid Applied materials. This course includes instruction on everything from selecting proper materials, substrate preparation, application technology and troubleshooting.
More Information

Not an Installer?
ABAA courses are open to everyone and are a great training opportunity for all, including General Contractors, Suppliers, Manufacturers sales rep, Architectural Reps, and anyone in the construction industry. There is NO experience needed to attend one of our great training courses.

Interested in Certification?
Self-Adhered and Fluid Applied installer training is designed to teach experienced installers how to create an Air Barrier using Self Adhered and Fluid Applied materials. This course includes instruction on everything from selecting proper materials, substrate preparation, application technology, troubleshooting and hands-on training.
For certification purposes, a minimum of 3000 hours of work experience either directly with air barriers or in applicable related trade experience is required.
For companies seeking to become ABAA Accredited Contractor, it is ABAA policy that each company has at least 1 person trained in an ABAA Installer Training Course and certified as an ABAA Level 3 Installer, and at least 1 person trained in the Quality Assurance Program Administrator Course.

Questions?
Please email us at training@airbarrier.org
See you there!
Download Registration Form
COURSE BEGINS TUESDAY, FEBRUARY 24, 2026 AT 10:00AM ET. IF YOU DO NOT RECEIVE A CONFIRMATION EMAIL WITHIN 3 BUSINESS DAYS OF REGISTERING, PLEASE CONTACT US DIRECTLY.
DEADLINE TO REGISTER IS FRIDAY, FEBRUARY 6, 2026

ABAA Contractor Webinar: Air Barrier Installation and Quality Control Fundamentals
2026-02-25 11:00 - 12:00
Join us for an informative presentation that emphasizes the importance of proper air barrier application in enhancing building performance. Properly installed air barriers are critical in preventing air leakage, which can lead to energy inefficiencies, moisture issues, and compromised indoor air quality.
We will delve into best practices for air barrier application, highlighting the techniques that ensure continuity and effectiveness. Attendees will learn about common challenges faced during installation and the vital role of quality control in maintaining the integrity of the air barrier system.
Through real-world project photo’s, we’ll illustrate key application requirements for a variety of air barrier materials and exactly what to look for when performing quality control and site-testing.
This webinar is exclusive to the ABAA contractor members. Please reach out to lhardman@airbarrier.org to register.

ABAA ExCom Meeting
2026-02-26 10:00 - 11:00
