BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//ABAA - ECPv6.15.17.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://airbarrier.org
X-WR-CALDESC:Events for ABAA
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Detroit
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20240310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20241103T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20251211T154500
DTEND;TZID=America/Detroit:20251211T164500
DTSTAMP:20260409T065827
CREATED:20251006T210530Z
LAST-MODIFIED:20251203T230139Z
UID:990000182-1765467900-1765471500@airbarrier.org
SUMMARY:Top Air Barrier Details for Commercial Construction  1.0 CEU/HSW
DESCRIPTION:Top Air Barrier Details for Commercial Construction\nIt’s often been said that architecture is the synthesis of art and science\, but the art of crafting a thoughtful and successful detail is often something that has to be learned on the job or at the school of hard knocks. This presentation will build on building science basics with in-depth study of detailing in multiple areas of the building envelope. Good and bad examples of real-life details will be reviewed from drawing to photos of built conditions to demonstrate how design intent gets translated into built form. \nLearning Objectives: \n\nIdentify locations in commercial building envelopes that merit close attention during the detailing process\nDescribe how design decisions such as material selection impact air tightness and the complexity of the resulting details\nExplore details that successfully and unsuccessfully manage air\, water and thermal control layers\nInvestigate the relationship between the four primary control layers and how to determine which take priority\n\nRegister Now \nChris Bubser\, AIA\, LEED AP BD+C\, Senior Technical Architect\, LHB Corp \nChris Bubser’s passion has always been detailing\, a specialty he cultivated as a Builder\, Architect\, Virtual Design and Construction Coordinator\, and Quality Manager on a variety of commercial and residential buildings around the Midwest. Chris has worked as a Senior Technical Architect at LHB since 2019\, where he leverages his diverse background in all phases of design\, construction contract administration\, facility condition assessments\, forensic analysis\, and mentoring emerging professionals in the dark arts of detailing. He served on the Board of the Building Enclosure Council of Minnesota from 2014 to 2022\, including two years as Chair.
URL:https://airbarrier.org/event/top-air-barrier-details-for-commercial-construction-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/10/Live-Rewind-Event-Image.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20251211T143000
DTEND;TZID=America/Detroit:20251211T153000
DTSTAMP:20260409T065827
CREATED:20251006T205831Z
LAST-MODIFIED:20251103T211059Z
UID:990000181-1765463400-1765467000@airbarrier.org
SUMMARY:Design Principles for Rainscreen Wall Systems  1.0 CEU/HSW
DESCRIPTION:Design Principles for Rainscreen Wall Systems\nThe topic will discuss thorough understanding of the various components that lead to failure in Building Enclosures and how to prevent it with Rainscreen system solutions. The importance of structural/Hygrothermal design of wall systems and air barriers\, vapor and thermal control in the walls will be presented. Owner/user benefits in using material manufacturer’s in design phase and how that leads to a FULL Building Envelope Hygrothermal Warranty from the manufacturer will be discussed. Finally\, we will discuss innovative ways to simplify the design\, construction\, commissioning and handover of the facility while maintaining the performance requirement(s) of the building design. \nLearning Objectives: \n\n Think of an enclosure as a system/assembly not individual component. Each has to be designed to work together for the overall Enclosure\n Detailing and inspection of AWB is most critical and should be the responsibility of the AWB manufacturer. The Assembly Manufacturer/supplier should provide overall assembly.\nDiscuss Non Proprietary Specifications\, Detailing\, and bid documents and working in tandem with GC.\n Learn innovative ways to simplify the design\, construction\, commissioning and handover of the facility while maintaining the performance requirement(s) of the building design.\n\nRegister Now \nJonnie Hasan\, PE BECxP\, CxA+BE\, Director of Engineering and Sales Support\, Innovative Metals Company \n Jonnie has more than 22 years of experience in commercial construction\, design-build\, and cladding industry. In his position\, Jonnie has various roles: including building envelope designer\, WUFI analyst\, manufacturing engineer\, sustainable smart building engineer\, and operations manager. Jonnie is also certified as a Building Envelope Commissioning Provider & Commissioning Authority designation by University of Wisconsin. Jonnie strives to guide clients to the most cost effective and efficient product application. Jonnie is a registered Professional Engineer with numerous patents related to building cladding system and design.
URL:https://airbarrier.org/event/design-principles-for-rainscreen-wall-systems-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/10/Live-Rewind-Event-Image.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20251211T131500
DTEND;TZID=America/Detroit:20251211T141500
DTSTAMP:20260409T065827
CREATED:20251006T204716Z
LAST-MODIFIED:20251103T211048Z
UID:990000180-1765458900-1765462500@airbarrier.org
SUMMARY:Masonry Thru-Wall Flashing and Key Interface Details  1.0 CEU/HSW
DESCRIPTION:Masonry Thru-Wall Flashing and Key Interface Details\nExplore the continuity of water and air control layers in relation to masonry thru-wall flashing at critical interface details\, including: base-of-wall\, window sill\, openings heads\, shelf angle\, veneer material transitions\, and top-of-wall. \nLearning Objectives: \n\n Understand masonry thru-wall flashing function and options\n Realize how masonry thru-wall flashing coordinates with water and air control layers\n Gain insights into common installation practices with jobsite photography\nDevelop an appreciation for thorough architectural details at key interface details in exterior wall assemblies\n\nRegister Now \nPat Conway\, AIA\, CSI\, Director\, Industry Development & Technical Services\, International Masonry Insitute \n Mr. Conway is a registered architect in Wisconsin and has been a masonry consultant for the past 28-years. He is an active member of the American Institute of Architects (AIA) and the Construction Specifications Institute (CSI)\, Director of IMI’s internal Masonry Technical Team\, distinguished masonry speaker and author.
URL:https://airbarrier.org/event/masonry-thru-wall-flashing-and-key-interface-details-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/10/Live-Rewind-Event-Image.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20251211T120000
DTEND;TZID=America/Detroit:20251211T130000
DTSTAMP:20260409T065827
CREATED:20251006T202514Z
LAST-MODIFIED:20251103T211039Z
UID:990000179-1765454400-1765458000@airbarrier.org
SUMMARY:When Codes are in Conflict: Building Science and Life Safety in Wood Framed Construction  1.0 CEU/HSW
DESCRIPTION:When Codes are in Conflict: Building Science and Life Safety in Wood Framed Construction\nOver time\, changes in building codes have begun to challenge designers to meet life safety\, indoor air quality\, and energy efficiency requirements on wood-framed\, mid-rise multi-family projects. When NFPA 13 sprinkler requirements are driving the design of the roof assembly\, the risk of condensation often increases: While vented roof assemblies are effective in steep slope applications\, the thermodynamics of a vented low-slope roof assembly make condensation more likely. To combat this many designers opt to provide a non-vented assembly with rigid insulation above the roof deck. This approach will generally trigger NFPA 13 sprinkler requirements which many developers and general contractors attempt to side-step by filling the roof cavity with a non-combustible insulation. The additional insulation within the framing requires careful consideration of vapor control strategies. It is critical for enclosure consultants to understand the code requirements that pertain to Type V construction and be able to identify the risks associated with the various compliance paths. In this presentation we will examine the various paths to code compliance while still applying building science principles to limit condensation risk. Detailed roof system examples will be provided\, demonstrating how these measures can enable durable AND code compliant roofing assemblies. \nLearning Objectives: \n\n Knowledge of code changes and how they impact durability in roofing assemblies.\n How to choose a vapor control strategy that meets the code requirements for life safety\, indoor air quality\, and energy efficiency.\n The impact of value engineering decisions related to sprinklers on roof performance.\n How hygrothermal modeling can inform the amount\, type\, and placement of insulation in a roof assembly.\n\nRegister Now \nErin Andes\, PE (CA\, WY)\, LEED AP\, Director of Design Outreach\, GAF \n As the Director of Design Outreach for the GAF Building and Roofing Science Team\, Erin works with designers to review project designs to mitigate risk and achieve affordable\, durable\, watertight\, and energy-efficient roof assemblies. In addition to helping design teams with roof assemblies and details\, she regularly presents and publishes technical content related to building and roofing science at conferences and training events. Her background includes building enclosure consulting on new construction and enclosure rehabilitation of a range of project types such as multi-family\, commercial\, institutional\, religious\, cultural\, and healthcare buildings. In addition\, Erin has provided investigation and litigation support services on building enclosure and product failures giving her great perspective on what to avoid in new construction and repairs.
URL:https://airbarrier.org/event/when-codes-are-in-conflict-building-science-and-life-safety-in-wood-framed-construction-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/10/Live-Rewind-Event-Image.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20251204T130000
DTEND;TZID=America/Detroit:20251204T140000
DTSTAMP:20260409T065827
CREATED:20250912T212537Z
LAST-MODIFIED:20251203T171315Z
UID:990000166-1764853200-1764856800@airbarrier.org
SUMMARY:Moisture Defects in Buildings - A Sick Building Pandemic 1.0 CEU/HSW
DESCRIPTION:Moisture Defects in Buildings – A Sick Building Pandemic\nPoor air quality caused by water damage and mold is contributing to increasing health burdens on occupants of buildings of every type\, construction and age…including new construction. Understanding and applying building science fundamentals along with considerations uniquely related to region\, site\, structure type\, materials and construction coordination is the key to successful building solutions that will be durable and supportive of occupant wellness over time. Bulk water\, condensation\, pressure differentials\, capillary action\, construction processes and even occupant activities contribute moisture to buildings which must be managed properly in today’s increasingly complex structures. Despite building code requirements\, common building defects continue to be overlooked by all involved in the quest for sustainability and at the expense of durability and wellness. Incorporating decades of research and professional education related to building science along with a personal health journey related to environmental toxin exposure\, this program raises awareness of the key role our buildings play in health and wellness. Professionals and non-professionals alike will gain knowledge and insights to discover\, correct and avoid building defects\, errors and omissions that often lead to water damage\, high indoor humidity\, mold and poor indoor air quality to confidently build facilities which are durable as well as being wellness supporting environments. \nLearning Objectives: \n\n Recognize causes and sources of water accumulation in building materials with potential health impacts.\nEvaluate the impacts of moisture on all building materials.\n Consider the mechanics of moisture movement for building design.\nRecognize moisture related building defects and design solutions to avoid them.\n\nRegister Now \nCheryl Ciecko\, President/Architect\, Dwell Well Institute \nCheryl Ciecko is a licensed architect\, building science and healthy building consultant providing education and resources to professionals and individuals world-wide. Cheryl uses her professional education and experience\, and extensive building science-focused research related to air quality\, moisture management and building science\, to identify and resolve building defects that can affect health and wellness of building occupants. As a thought leader with an online consulting practice supporting individuals and professionals\, Cheryl specializes in building defect avoidance\, water damage and mold\, reaching thousands of followers each month. Homeowners and building professionals find her various online education programs extremely beneficial as her following continues to grow. Cheryl has architectural degrees from University of Minnesota and the University of Illinois and is licensed in Illinois and Wyoming. She serves as the architect representative to the U.S. American Lumber Standards Committee and was a board member for the Association of Licensed Architects for over 13 years. A past member of the AIA\, Cheryl is also a LEED AP with unique insights to share. It’s Cheryl’s mission to raise awareness of the role the built environment plays in health and wellness\, while fostering discussion\, sharing solutions and peer education to address the complex problems of our times.
URL:https://airbarrier.org/event/moisture-defects-in-buildings-a-sick-building-pandemic-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/09/Moisture-Defects_12_04_25-WebsiteSlide.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20251120T130000
DTEND;TZID=America/Detroit:20251120T140000
DTSTAMP:20260409T065827
CREATED:20250912T205824Z
LAST-MODIFIED:20251103T204642Z
UID:990000165-1763643600-1763647200@airbarrier.org
SUMMARY:Pitfalls and Challenges to Avoid in NFPA 285 Engineering Judgements 1.0 CEU/HSW
DESCRIPTION: Pitfalls and Challenges to Avoid in NFPA 285 Engineering Judgements\nEngineering Analysis is a necessary tool to provide the fire protection and safety of our buildings. The exponential number of wall assembly combinations and detailing of enclosure assemblies in the built environment prevents the opportunity to confirm fire performance through direct testing. This is especially true with the required investment of time\, effort\, and cost of for larger scale tests such as NFPA 285. Qualified Fire Engineering teams in partnership with third-party labs and the product manufacturers offer the opportunity to extend successful test results beyond the tested specimen through a Letter of Engineering Analysis. This presentation will discuss the opportunity\, challenges and limitations present when considering acceptance of test data extended to support substitution or modification to an assembly. \nLearning Objectives: \n\n Identify appropriate content within engineering analysis reports pertaining to exterior walls.\n Understand the different types of engineering analysis reports.\nGain an understanding of the engineering analysis process and considerations when reviewing fire test data for extension.\nIdentify the relevant code path that allows for engineering analyses.\n\nRegister Now \n Keith Nelson\, NCARB\, AIA\, CDT\, BCxP\, Commercial Application Leader and Fire Performance SME\, Dupont  \nKeith P. Nelson joined DuPont in January 2023 with over 20 years of industry experience leading building enclosure consulting for design and construction projects across the US and internationally. He is a licensed Architect in multiple states and joined DuPont with strong experiences in building science\, building enclosure forensics\, enclosure commissioning\, field performance testing\, and is an industry leader in NFPA 285 compliance education. Keith leads and participates in multiple standard development organizations\, including ICC 1125\, ASHRAE 90.1\, ASTM E06\, and ASTM E05 and was elected to the ABAA Board of Directors in June 2024. He holds a Bachelor of Science in Architecture and a Bachelor of Science in Environmental Design from Ball State University in Muncie\, Indiana. \n\nDan Martin\, PE\, CFEI\, CVFI\, Lead Fire Protection Engineer\, Jensen Hughes \nDan Martin is a Fire Protection Engineering working in the RDT&E group conducting live fire research for a variety of clients ranging from government institutions to the private sector\, and in the fire forensics group as a fire investigator. Additionally\, he analyzes and inspects building construction deficiencies that relate to the IBC fire rating of various assemblies and constructions. He’s also part of a team of engineers that provide guidance\, design recommendations\, and write engineering judgment letters for exterior cladding systems compliance in accordance with NFPA 285. He is actively engaged in the ICC code development process representing clients and the FPE industry in the development of the International Building Code. \n 
URL:https://airbarrier.org/event/pitfalls-and-challenges-to-avoid-in-nfpa-285-engineering-judgements-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/09/Pitfalls-and-Challenges_11_20_25-WebsiteSlide.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20251119T110000
DTEND;TZID=America/Detroit:20251119T120000
DTSTAMP:20260409T065827
CREATED:20250903T213038Z
LAST-MODIFIED:20250903T213038Z
UID:990000143-1763550000-1763553600@airbarrier.org
SUMMARY:ABAA Contractor Webinar: Open Forum - Curtainwall Details Solutions to Your Real-world Applications
DESCRIPTION:We are excited to host a free virtual educational webinar in November\, but need your help.  Our speaker\, Adam Ugliuzza\, will be hosting an open forum\, focusing on curtainwall details in real-world applications.  Send project-specific issues with an example picture or detail by October 31 to lhardman@airbarrier.org (redact sensitive information).   \nThe webinar will be interactive\, and solutions will be provided on the call. \nDiscussion will: \n\nSummarize Unitized Curtain Wall Design: Provide a general overview of unitized curtain wall design and compare it to other curtain wall types.\nExplore Unitized Curtain Wall Installation: Review unitized curtain wall details to understand typical installation procedures.\nExplore Unitized Curtain Wall Interface Conditions: Review unitized curtain wall details that have been provided and present solutions for interfacing with the air and water barrier.\n\nThis webinar is exclusive to the ABAA contractor members.  Please reach out to lhardman@airbarrier.org to register.
URL:https://airbarrier.org/event/abaa-contractor-webinar-open-forum-curtainwall-details-solutions-to-your-real-world-applications/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/04/Contractor-Webinar-1-scaled.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20251113T130000
DTEND;TZID=America/Detroit:20251113T140000
DTSTAMP:20260409T065827
CREATED:20251006T182154Z
LAST-MODIFIED:20251112T193032Z
UID:990000178-1763038800-1763042400@airbarrier.org
SUMMARY:BECx Fundamentals: What It Is and Why It Matters 1.0 CEU/HSW
DESCRIPTION:BECx Fundamentals: What It Is and Why It Matters\nThis session provides a summary of Building Enclosure Commissioning (BECx)\, focusing on its role in delivering the building owner’s vision by achieving a high-performing\, durable building envelope. It explores the structured BECx process\, outlining how BECx providers\, contractors\, architects\, and owners collaborate to meet performance goals throughout each project phase. \nEmphasizing the critical role of air barriers\, the session highlights their functions and illustrates how BECx supports air barriers in performing as intended. Essential documentation –such as design reviews\, field testing\, deficiency tracking\, and final acceptance reports –will be outlined to establish efficient communication and issue resolution. Key industry standards\, including ASTM and ASHRAE Guideline 0\, will be introduced as benchmarks for BECx performance. \nStandard testing methods\, including air leakage and water penetration\, will be examined with a focus on early identification of air barrier deficiencies to safeguard envelope integrity. Additionally\, a brief comparison between BECx and mechanical commissioning will clarify their distinct scopes\, showcasing BECx’s value in achieving building durability\, sustainability\, and quality aligned with the owner’s vision. \nLearning Objectives: \n\nDescribe the Roles and Responsibilities in a BECx Project: Participants will be able to identify the roles of key stakeholders\, allowing them to collaborate effectively and align on project goals and responsibilities throughout the commissioning process.\nOutline Key Documentation and Verification Methods in BECx: Participants will be able to interpret essential documentation\, using real-world examples to outline verification methods like BECx forms and field testing to confirm compliance with specifications.\nDiscuss Relevant Standards and Guidelines for BECx: Participants will be able to identify relevant standards applicable to the BECx process\, enabling them to interpret and adhere to building envelope commissioning guidelines.\n Identify BECx’s role in addressing deficiencies in the building enclosure: Participants will be able to recognize how BECx contributes to identifying and mitigating envelope deficiencies and perform as intended.\n\nRegister Now \nAlessandra Valerio\, B. Arch\, PMP\, BECxP\, CxA+BE\, Building Science Consultant\, Project Manager\, Stantec \nAlessandra Valerio is a Building Science Consultant at Stantec\, specializing in Building Enclosure Commissioning (BECx) and building envelope systems. With over eight years of experience in the construction industry\, she is dedicated to empowering stakeholders to succeed in better construction practices and helping building owners achieve their requirements.\nShe began her career coordinating high-rise commercial building projects\, managing project compatibility and ensuring alignment with project requirements\, quality standards\, and client expectations through technical solutions\, inter-disciplinary coordination\, and activity monitoring –all while focusing on advancing construction technology and production management.\nTransitioning into consulting as a technical consultant representing building materials manufacturers\, Alessandra gained in-depth knowledge of building materials while providing guidance to architects across diverse building types during the design and construction phases\, ensuring compliance with project objectives. \nAs a Building Enclosure Commissioning Provider (BECxP) specialist\, Alessandra supports the performance of building envelope systems. She collaborates with project teams to verify design intent and checks that materials and construction methods meet performance standards and owners’ requirements. This thorough approach improves the quality and durability of the building envelope. \nAlessandra holds a degree in Architecture and Urbanism from the University of São Paulo and a postgraduate qualification in Building Construction Management from the Politecnica of São Paulo. She has also completed coursework in Building Science Specialist (BSS)\, Project Management Professional (PMP) at the University of Toronto and Commissioning Building Enclosure Assemblies and Systems (BECx) at Wisconsin University-Madison. Currently\, she serves on the Board of Directors of the Ontario Building Envelope Council (OBEC).
URL:https://airbarrier.org/event/becx-fundamentals-what-it-is-and-why-it-matters-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/10/BECx-Fundamentals_11_13_25-WebsiteSlide.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20251106T130000
DTEND;TZID=America/Detroit:20251106T140000
DTSTAMP:20260409T065827
CREATED:20250912T202649Z
LAST-MODIFIED:20251031T210554Z
UID:990000164-1762434000-1762437600@airbarrier.org
SUMMARY:What the Heck Happened\, A Case Study in a New Building's Stucco Gone Wrong 1.0 CEU/HSW
DESCRIPTION:What the Heck Happened\, A Case Study in a New Building’s Stucco Gone Wrong\nA recently constructed charter elementary school had a huge problem. Their new stucco of about 8 years was extensively cracked and the window perimeters were leaking into the classrooms. This case study will address the steps of investigation which included forensic discovery of the extent of the problems and the resultant decomposition damage and insect infestation which occurred due to the problem water infiltration. This will then address the assessment that the originally designed traditional three-coat stucco\, was mis-applied. Instead of applying the required second or brown coat\, the problem assembly jumped ahead and installed an extra-thick finish coat. This then caused excessive shrinkage\, extensive spider cracking\, and complete delamination of the finish coat from the stucco backup scratch coat. The cracks and the delamination allowed the free-flow of wind-driven rain to travel past the mis-flashed windows and into the children’s classrooms. To remove and reinstall traditional three-coat stucco with a color finish would not have fit into the summer construction schedule\, so instead\, a drainage back\, direct-apply\, DEFS to cement board stucco system\, along with new flashings and fluid-applied air and weather barrier was selected. This allowed the entire remediation project to occur within the summer construction season prior to the start of school. The result is a water-tight project\, that looks exactly like the original stucco intent\, but now is even better with reliable back-drainage\, flashings\, and of-course without the plaguing problems. \nLearning Objectives: \n\nReview the guidelines for traditional three-coat stucco.\nDescribe why too much of the stucco finish coat may cause a problem.\nClarify why flashings are needed at windows instead of relying on the integrity of the finish materials.\nContrast the differences between three-coat stucco\, EIFS\, and DEFS hard-coat to cement board systems.\n\nRegister Now \nGeorge David Schoenhard\, AIA\, ABAA\, REWC\, BECxA\, RRO\, CSI\, LEED AP\, OSHA\, Manager & Principal\, Design Support Services of Philadelphia\, LLC (DSS-Philly) \nGeorge David Schoenhard\, AIA has over 45 years’ experience in designing fine architecture\, with the last nine as the Principal of DSS-Philly\, one of the leading High-Performance Building Enclosure consulting firms in the Philadelphia region. He brings his decades of architectural experience to skillfully advise and design\, implement or remediate building enclosures on behalf of other architects\, owners and contractors. He is the inventor and developer of the high-performance Back-Lattice Wall Design. He actively researches comparative building enclosure assemblies\, speaks nationally\, presents ABAA Webinar’s\, and is an AIA Continuing Education Provider.
URL:https://airbarrier.org/event/what-the-hell-happened-a-case-study-in-a-new-buildings-stucco-gone-wrong-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/09/WhattheHellHappened_11_06_25-WebsiteSlide.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20251030T130000
DTEND;TZID=America/Detroit:20251030T140000
DTSTAMP:20260409T065827
CREATED:20250716T155358Z
LAST-MODIFIED:20251003T215653Z
UID:990000106-1761829200-1761832800@airbarrier.org
SUMMARY:Testing the Boundaries: Quality Control Options for Air Barrier Installation 1.0 CEU/HSW
DESCRIPTION:Testing the Boundaries: Quality Control Options for Air Barrier Installation\nAir barriers separate conditioned air from unconditioned air\, improving energy efficiency and limiting the risk of unintended moisture migration via airflow that may result in condensation within wall assemblies. But\, as with any system\, the performance of the air barrier depends on the quality of the design and installation. The industry has started to place a greater emphasis on quality installation of air barriers\, including iterative evolution of more stringent requirements in the International Energy Conservation Code (IECC). Developing industry guidelines and standards provide additional performance testing procedures that can be used to further evaluate installed air barrier materials and assemblies beyond code requirements. Examples of such quality control measures include visual inspection\, air leakage testing\, and adhesion testing. Results may vary depending on the specific procedure selected\, and different tests yield different types of results (i.e.\, qualitative vs quantitative). Test methodology\, manufacturer recommendations\, industry standards\, and the component(s) being evaluated all influence the appropriate evaluation criteria. The variety of available options complicates the assessment and selection of quality control measures that are most beneficial to meet project goals. This presentation will discuss air barrier quality control options and test procedures\, highlight appropriate applications and limitations of procedures discussed\, and describe methods to evaluate test criteria and results to maximize benefits and achieve project-specific goals. \nLearning Objectives: \n\nDiscuss code requirements and additional industry standards for air barrier quality control procedures and the importance of such measures.\nCompare the advantages and limitations of various quality control tests and procedures for air barrier materials and assemblies.\n Evaluate appropriate test criteria for a variety of air barrier quality control tests.\nLearn to assess and select suitable air barrier quality control methods for a project based on the project-specific goals.\n\nRegister Now \nJordan Stirling\, Project Consultant\, Simpson Gumpertz & Heger \nJordan Stirling is a Project Consultant for Simpson Gumpertz & Heger (SGH) and has experience with new design enclosure consulting\, rehabilitation\, enclosure commissioning and investigation projects for a variety of owners\, architects\, and general contractors. She received her bachelor’s degree in architectural engineering from The University of Texas and has worked on a wide array of commercial\, residential\, and institutional projects while at SGH. \n  \n  \n\nBrian Rose\, P.E.\,Senior Project Manager\, Simpson Gumpertz & Heger \nBrian Rose is a Professional Engineer and Senior Project Manager for Simpson Gumpertz & Heger (SGH) where he provides a variety of building enclosure commissioning\, consulting\, and investigation services for owners\, architects\, and contractors. Brian manages a wide array of commercial\, residential\, government\, and institutional projects in the mid-Atlantic region and has worked closely with architects and contractors to specify\, perform\, and witness air barrier quality control testing. He holds BECxP and CxA+BE certifications and is an active member of the Air Barrier Association of America\, Fenestration and Glazing Industry Alliance\, and others.
URL:https://airbarrier.org/event/testing-the-boundaries-quality-control-options-for-air-barrier-installation-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/TestingtheBoundaries_10_30_25-WebsiteSlide.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20251029T110000
DTEND;TZID=America/Detroit:20251029T120000
DTSTAMP:20260409T065827
CREATED:20250903T212857Z
LAST-MODIFIED:20250903T212857Z
UID:990000144-1761735600-1761739200@airbarrier.org
SUMMARY:ABAA Contractor Webinar: Air Barrier Submittals - Shop Drawings\, Design Intent\, and the Risk of Detail Clarifications Becoming Changes
DESCRIPTION:This interactive panel discussion will address shop drawing submittals and their role in construction. The speaker panel will have representative from legal\, architectural\, installer\, and general contractor backgrounds who will discuss responsibilities of each party\, and what risks each party may be talking on\, knowingly or unknowingly. The panel will also discuss best practices for shop drawing creation\, submission\, and implementation in the field. Audience Q&A and participation is encouraged. \nLearning Objectives:  \n\nUnderstand the contractual requirements of shop drawings\, and how they integrate with the contract documents.\nRecognize potential risks/liabilities of shop drawings that modify design details.\nBe able to define the role of the installer (trade contractor) and manufacturer in shop drawing creation.\nKnow the responsibilities of each party in submitting\,  approving\, and implementing shop drawings.\n\nThis webinar is exclusive to the ABAA contractor members.  Please reach out to lhardman@airbarrier.org to register.
URL:https://airbarrier.org/event/abaa-contractor-webinar-air-barrier-submittals-shop-drawings-design-intent-and-the-risk-of-detail-clarifications-becoming-changes/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/04/Contractor-Webinar-1-scaled.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20251023T130000
DTEND;TZID=America/Detroit:20251023T140000
DTSTAMP:20260409T065827
CREATED:20250708T191814Z
LAST-MODIFIED:20251023T160738Z
UID:990000104-1761224400-1761228000@airbarrier.org
SUMMARY:Sink or Swim: Effective Natatorium Envelope Design Thru Case Study  1.0 CEU/HSW
DESCRIPTION:POSTPONED \nSink or Swim: Effective Natatorium Envelope Design Thru Case Study\nParticipants will develop a comprehensive understanding of the potential risks involved in designing roof and wall assemblies over pools and other corrosive environments. The session will cover effective design strategies to mitigate moisture damage by managing air\, temperature\, and vapor control. Key roof assembly elements—such as metal decking\, fasteners\, air/vapor barriers\, and insulation—will be discussed in detail. Finally\, these principles will be applied in a case study\, covering the full project lifecycle from concept and design to application\, inspections\, and handover. \nLearning Objectives: \n\nExplain how moisture intrudes and affects roof/wall assemblies over pools and caustic environments.\nSummarize the typical materials of construction\, and advantages associated with material selection in roof and wall assemblies.\nIdentify the functional performance-based characteristics of a high-performance enclosure system.\nAnalyze various preferred natatorium roof/wall assembly details and applications in a case study.\n\n  \nQ. Jonnie Hasan\, M. Eng. (Sustainable Development)\, Professional Engineer (P.E. Structural)\, BECxP\, CxA+BE\, Director of Engineering\, IMETCO \nJonnie has more than 24 years of experience in commercial construction\, design-build\, and cladding industry. In his position\, Jonnie has various roles: including building envelope designer\, WUFI analyst\, manufacturing engineer\, sustainable smart building engineer\, and operations manager. Jonnie is also certified as a Building Envelope Commissioning Provider & Commissioning Authority designation by University of Wisconsin. Jonnie strives to guide clients to the most cost effective and efficient product application. Jonnie is a registered Professional Engineer with numerous patents related to building cladding system and design.
URL:https://airbarrier.org/event/sink-or-swim-effective-natatorium-envelope-design-thru-case-study-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Sink-or-Swim_10-23_WebsiteSlide.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20251016T130000
DTEND;TZID=America/Detroit:20251016T140000
DTSTAMP:20260409T065827
CREATED:20250715T213418Z
LAST-MODIFIED:20250815T141733Z
UID:990000105-1760619600-1760623200@airbarrier.org
SUMMARY:Building Envelope Solutions: Building Code Compliance for Fire\, Air\, Water\, and Vapor 1.0 CEU/HSW
DESCRIPTION:Building Envelope Solutions: Building Code Compliance for Fire\, Air\, Water\, and Vapor\nThis presentation discusses the key Building Code and Industry Standards for meeting fire\, air\, water\, and vapor requirements in Residential and Commercial construction projects. The building envelope is an essential integrated system in new construction. When system components are incorrectly installed or if the system is poorly designed\, the potential for air leakage and moisture problems greatly increase. Evolving building products and material technologies\, as well as designed assemblies\, achieving code compliance with required fire protection\, air and water barrier\, and vapor permeance are identified. Selecting the appropriate building materials and proper installation techniques are addressed for creating a barrier and protecting the structure. \nLearning Objectives: \n\n Discuss Building Codes and Industry Standards for fire\, air\, water\, and vapor.\n Discuss Energy Code Compliance and Energy Rebate Programs specific to climate zones\nIdentify Building Code Solutions with building materials\, assemblies\, and construction design.\nDescribe installation and testing for a variety of building materials that meet fire performance\, air barrier/water barrier\, and vapor retarder requirements.\n\nRegister Now \nJames Toth\, VP of Sales\, No-Burn\, Inc \nJames Toth is the Vice President of Sales at No-Burn\, Inc.\, where he leads national sales initiatives in the fire-retardant coatings industry. He previously served as Regional Sales Manager for the Midwest region. With a background in construction project coordination at United Glass & Panel Systems\, James brings hands-on experience in building systems and materials. He is also a Marine Officer in the U.S. Marine Corps Reserve. James holds both a B.S. and an MBA from Ashland University\, where he was a student-athlete and active in business leadership programs.
URL:https://airbarrier.org/event/building-envelope-solutions-building-code-compliance-for-fire-air-water-and-vapor-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/BuildingEnvelopeSolutions_10_16_25-WebsiteSlide.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20251009T130000
DTEND;TZID=America/Detroit:20251009T140000
DTSTAMP:20260409T065827
CREATED:20250725T164750Z
LAST-MODIFIED:20250815T141623Z
UID:990000122-1760014800-1760018400@airbarrier.org
SUMMARY:Commissioning the Air Barrier 1.0 CEU/HSW
DESCRIPTION:Commissioning the Air Barrier\nThe IECC 2021 requires air barrier commissioning and/or whole building air tests as part of the code compliancy pathways. The process is an essential step to ensure that the building enclosure assembly performs as intended and complies with the energy code. The presenter will detail the commissioning process as it relates to air barrier systems. \nLearning Objectives: \n\n Understanding of the commissioning process.\n Review energy code compliance pathways\n Review on-site air barrier inspection and testing procedures.\nReview design decisions that can improve or hinder the air barrier performance.\n\nRegister Now \nBrian Neely\, AIA\, CDT\, BECxP\, Vice President\, Senior Associate\, Gale Associates \nBrian Neely\, AIA\, CDT\, BECxP is Vice President at Gale Associates\, Inc and Director of the Building Enclosure Consulting and Commissioning Group. Mr. Neely is a certified Building Enclosure Commissioning Provider and is actively involved with supplying design review analysis and managing building enclosure commissioning and testing services for new construction and renovation projects. Mr. Neely is a past President of the Boston Building Enclosure Council and assisted the National Institute of Buildings Science in the development and presentation of the building enclosure training program. Mr. Neely is a long-time member of ABAA and has presented at several conferences.
URL:https://airbarrier.org/event/commissioning-the-air-barrier-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/CommissioningAirBarrier_10_09_25-WebsiteSlide.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20251002T130000
DTEND;TZID=America/Detroit:20251002T140000
DTSTAMP:20260409T065827
CREATED:20250708T180726Z
LAST-MODIFIED:20250815T141514Z
UID:990000103-1759410000-1759413600@airbarrier.org
SUMMARY:Achieving a High-Performance Air Barrier System  1.0 CEU/HSW
DESCRIPTION:Achieving a High-Performance Air Barrier System\nAir Barriers are an extremely important component of a high-performance building enclosure system. For the most part\, these systems are non-maintainable components and repairs can typically only be made with the removal of the exterior cladding system. To ensure a performing system\, proper design\, detailing and ultimately the proper installation of these systems is extremely important. You have one chance to get it right. Come learn about important design considerations\, how to properly detail critical interfaces\, key items to include in your specifications\, proper installation techniques\, quality control and testing parameters for a variety of air barrier systems in use today. \nLearning Objectives: \n\nDiscuss how air barriers are part of a high-performance building and how they control air and moisture movement\, improve insulation performance and reduce energy needs of buildings\nReview key design considerations\, critical interfaces for continuity\, material performance requirements and specification language for the proper design and selection of the air barrier assembly\nIdentify the typical installation requirements of a variety of air barrier materials and assemblies and common installation issues observed in the field\nDiscuss the importance of proper construction sequencing\, coordination of sub-trades\, testing and inspection criteria\, how to identify installation defects and remedial action required during the construction phase\n\nRegister Now \nDenali Jones\, P.E.\, Technical Director\, ABAA \nDenali is an engineer focused on building enclosures for his entire career. After working for a manufacturer he transitioned into consulting\, working for one of the leading building science firms in North America for over a decade. Denali’s work focused on finding practical and performance driven solutions to complex enclosure problems\, ranging from high-rise office towers to hospitals\, multifamily\, manufacturing facilities\, and everything in between. He has extensive experience in all aspects of enclosure design\, including roofing\, glazing systems\, horizontal waterproofing\, below grade waterproofing\, air barriers\, and rainscreen wall assemblies with just about any type of cladding. Denali also is an industry leading expert in whole-building air leakage testing\, having helped develop several test standards and code language around testing requirements. He was instrumental in developing ABAA’s whole-building air leakage testing training program and is the lead instructor for this program. Denali now serves as the technical director for ABAA\, focusing on driving the adoption and advancement of air barriers both at a committee level as well as providing support for ABAA members in answering technical questions or delivering presentations and training.
URL:https://airbarrier.org/event/achieving-a-high-performance-air-barrier-system-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/AchievingHighPerformance_10_16_25-WebsiteSlide.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20250925T130000
DTEND;TZID=America/Detroit:20250925T140000
DTSTAMP:20260409T065827
CREATED:20250627T212137Z
LAST-MODIFIED:20250924T161935Z
UID:990000091-1758805200-1758808800@airbarrier.org
SUMMARY:Akira Window Connection: Pathways to Thinner Exterior Walls 1.0 CEU/HSW
DESCRIPTION:Akira Window Connection: Pathways to Thinner Exterior Walls\nAkira Window Connection – a market ready punched window installation method that nearly eliminates window transition thermal bridging. This innovation helps reduce wall thickness\, embodied carbon emissions\, construction cost\, and meet performance-based energy targets. In partnership with Northern Facades and Cascadia Windows\, we will discuss maximum window size results from the secondary structure analysis\, and 3-D thermal simulation results. Also\, unveiling facility mock-up water penetration resistance test results by Cascadia Windows and lessons learned to address water management and airtightness. Review how Akira Window Connection allows a high-rise retrofit to reduce exterior insulation from 10-inches to 6-inches thick by eliminating heat loss at window transitions. \nLearning Objectives: \n\nParticipants will learn about innovative window installation design – improving constructability and maximizing performance intended for larger buildings suitable for combustible / non-combustible construction.\nParticipants learn about best practices for water management and airtightness detailing with Akira Window Connection with lessons learned from laboratory testing conducted at Cascadia Windows. This includes water penetration resistance testing in accordance with ASTM E1105.\nParticipants learn how innovative window installation design can address affordability and lower energy demand simultaneously.\nWe will explain to participants on how they can access 3D thermal simulation results and data sheets for free at ThermalEnvelope.ca to incorporate into their next project.\n\n\nRegister Now \nCody Belton\, AScT\, P.Tech\, CPHD\, Passive House Specialist + Building Enclosure Consultant\, Stantec Consulting \nCody is a Certified Passive House Designer (CPHD) and Building Enclosure Consultant. Bringing over 16 years of collective experience as a Building Enclosure Consultant\, he has dedicated the past eight years to practicing as a Passive House Specialist. In this capacity\, Cody provides consultation and implementation of Passive House design strategies for new building construction and retrofit projects. He coordinates design teams and develops custom building enclosure design packages for a range of building typologies. He is keen to share his insights and continue his learning to advance sustainable building practices for communities across Canada and US. Most recently\, Cody was a proud speaker at the 2023 Passive House Network Conference in Denver\, CO\, and 2024 Annual Passive House Canada Conference in Victoria\, BC.
URL:https://airbarrier.org/event/akira-window-connection-pathways-to-thinner-exterior-walls-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/08/Website-Slide-28820px-x-820px-29-1-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20250924T120000
DTEND;TZID=America/Detroit:20250924T130000
DTSTAMP:20260409T065827
CREATED:20250721T173808Z
LAST-MODIFIED:20250721T174041Z
UID:990000119-1758715200-1758718800@airbarrier.org
SUMMARY:ABAA Contractor Webinar: Building Science Fundamentals
DESCRIPTION:Buildings are designed to separate indoor and outdoor environments\, but differences between them create forces that challenge the building envelope. Key demands include managing liquid water\, air\, heat\, and water vapor flows. While these concepts seem simple\, their complexities often lead to confusion\, such as distinguishing between air and vapor barriers. \nThis presentation explores how these flows impact building envelope performance and its essential functions. \nLearning Objectives: \n– Understand some of the myths regarding vapor\, air and thermal transfer\n– Identify the concept of “Building as a System” and how the building enclosure relates to this\n– Explain the forces of moisture\, air and heat flow\, as applicable to a building\n– Define how to control these forces effectively to save energy and reduce risk of moisture damage \nThis webinar is exclusive to the ABAA contractor members.  Please reach out to lhardman@airbarrier.org to register.
URL:https://airbarrier.org/event/abaa-contractor-webinar-building-science-fundamentals/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/04/Contractor-Webinar-1-scaled.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20250918T130000
DTEND;TZID=America/Detroit:20250918T140000
DTSTAMP:20260409T065827
CREATED:20250626T162022Z
LAST-MODIFIED:20250917T203546Z
UID:990000090-1758200400-1758204000@airbarrier.org
SUMMARY:Predicting Rooftop Surface Temperature Extremes and Impact on Air Barrier Tie-Ins 1.0 CEU/HSW
DESCRIPTION:Predicting Rooftop Surface Temperature Extremes and Impact on Air Barrier Tie-Ins\nRoofing system surfaces can get hot\, sometimes extremely hot due to climatic and indoor design conditions\, direct and reflected solar radiation exposure\, and radiative heat transfer with surrounding objects. Roof surface color\, the position and color of adjacent objects\, as well as the thermal properties of materials are key parameters that greatly influence roofing system peak temperatures. An adjacent parapet wall\, metal coping cover may experience similar surface temperature conditions. Critical rainwater and air control layers transition between roofing and façade systems at the parapet. Designs are complex and rely on tie-ins to allow for differential movement between the parapet wall and roof membrane. Transition membranes many times address scope-of-work issues between roofing and wall air barrier system trade responsibilities. Flashing membranes that maintain the continuity of air and water-resistive barrier systems have upper service temperature limits that vary between 180°F and 300°F. Identifying the parameters controlling climate specific\, rooftop surface temperature extremes will help designers specify the thermal performance requirements for flashing membranes. \nLearning Objectives: \n\nParticipants will be able to list the key factors influencing tie-in temperatures for continuous air barrier systems across roof\, parapet\, and façade assemblies.\nParticipants will understand the impact of solar reflection from adjacent elements on roof\, parapet\, and façade system temperatures\, and identify scenarios that may require high-temperature-rated air barrier system tie-in membranes.\nDescribe the process to simulate and visualize roof\, parapet\, and facade system heat transfer.\nParticipants will understand how temperature rating requirements for tie-in membranes vary across climate zones.\n\n\nRegister Now \nStanley D. Gatland II\, Manager\, Building Science and Comfort\, Saint-Gobain North America \nStan Gatland is the Manager of Building Science and Comfort for Saint-Gobain North America. He is responsible for leading projects that focus on developing\, demonstrating\, and connecting Saint-Gobain/CertainTeed solutions to the performance of buildings regarding indoor environmental quality and occupant comfort. Stan has over 30 years of experience and expertise in building science and architectural acoustics with an extensive professional network in the fields of energy efficiency\, heat and moisture transfer\, environmental acoustics\, and fire science. He is an accomplished speaker with over ninety publications. Stan holds a master’s degree in mechanical engineering from the University of Massachusetts\, Amherst.
URL:https://airbarrier.org/event/predicting-rooftop-surface-temperature-extremes-and-impact-on-air-barrier-tie-ins-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/08/Website-Slide-28820px-x-820px-29-3.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20250911T130000
DTEND;TZID=America/Detroit:20250911T140000
DTSTAMP:20260409T065827
CREATED:20250617T183101Z
LAST-MODIFIED:20250808T153616Z
UID:990000085-1757595600-1757599200@airbarrier.org
SUMMARY:New Air Barrier Requirements for Re-Roofing 1.0 CEU/HSW
DESCRIPTION:New Air Barrier Requirements for Re-Roofing\nAs energy codes evolve\, so do the requirements for roof system performance — especially during reroofing projects. This course explores the latest updates to building codes and standards that introduce air barrier requirements when replacing existing roofs. Attendees will learn why air control matters\, how it interacts with moisture and thermal layers\, and what design professionals and contractors need to consider to ensure code compliance\, building durability\, and energy efficiency. \nLearning Objectives: \n\nIdentify key code changes related to air barriers in reroofing.\n Understand the building science principles behind air leakage and roof system performance.\n Evaluate existing roof conditions to determine air barrier requirements.\n Review best practices for detailing and integrating air barriers during reroofing.\n\n\nRegister Now \nMatt Braun\, P.E.\, Building Design Manager\, Standard Industries (GAF + Siplast) \nMatt Braun is a Building Design Manager for GAF in the West Region of the US. Matt is a\nlicensed Professional Engineer in multiple states (AZ\, CO\, & TX) and holds a bachelor’s degree in Civil Engineering from Texas A&M University. With over 14 years of experience in building enclosure design and consulting\, his background includes waterproofing design in multi-family construction\, compliance and forensic testing of roof and exterior facade assemblies\, consulting on new construction and restoration projects\, and review of roofing and building designs with designers and installers. Matt is also an active member of IIBEC (Colorado Chapter President 2023 & 2024) and NRCA. \n  \nJason Conley\, AIA\, CDT\, LEED AP\, RRO\, Building Design Manager\, GAF Commercial Roofing \nJason Conley is the Midwest Building Design Manager on the GAF Building & Roofing Science team. He is focused on providing Architects and Specifiers with commercial roofing education\, technical guidance\, roofing system selection\, and specification development. \nJason has over 25 years of experience in the architecture and commercial roofing industry. His previous roles include Architectural Designer on multi-family developments\, office buildings\, and mountain ski resorts in Colorado. He also provided technical assistance to Architects and Contractors as a Commercial Roofing Sales Representative in Chicago\, Illinois. \nJason has a Bachelor of Science in Architecture from Lawrence Technological University. He is an Associate member of AIA\, a LEED Accredited Professional\, a Registered Roof Observer\, and a Construction Documents Technologist. Jason is also an active member of IIBEC (Chicago Chapter Director 2024 & 2025). \nPhoto Credit to Nexus Building Envelope Consultants
URL:https://airbarrier.org/event/new-air-barrier-requirements-for-re-roofing-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/08/Website-Slide-28820px-x-820px-29-2.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20250904T130000
DTEND;TZID=America/Detroit:20250904T140000
DTSTAMP:20260409T065827
CREATED:20250605T185351Z
LAST-MODIFIED:20250808T153620Z
UID:990000079-1756990800-1756994400@airbarrier.org
SUMMARY:Beyond the Sill Seal: A Modern Approach to Air Barriers for Long-Lasting Building Enclosures 1.0 CEU/HSW
DESCRIPTION:Beyond the Sill Seal: A Modern Approach to Air Barriers for Long-Lasting Building Enclosures\nThe effectiveness of air barriers in building enclosures is critical for energy efficiency\, comfort\, and indoor air quality. Traditional gasketing materials\, such as sill seals\, have long been utilized to manage air infiltration. However\, these materials often fall short in meeting modern standards for airtightness and durability\, leading to issues with thermal performance and moisture control over time. This presentation will introduce emerging professionals to advanced air barrier systems\, highlighting why foundational knowledge in these systems is essential for resilient building design. This session will examine the limitations of traditional gasketing in creating reliable air barriers and will guide attendees through a foundational overview of air barrier materials\, assemblies\, and testing requirements. Attendees will gain insight into the building science behind effective air barriers\, understand the realities behind common installation practices\, and explore a range of installation techniques for various air barrier technologies. We will also discuss design considerations for climate-specific applications\, addressing how innovative air barrier systems outperform older methods in diverse environmental contexts. \nLearning Objectives: \n\n Describe the limitations of traditional gasketing materials like sill seals in creating effective air barriers.\nGain foundational knowledge in the types\, applications\, and testing requirements of modern air barrier materials.\nExplore essential building codes and standards for air\, water\, and vapor barriers to ensure compliance and best practices.\nInvestigate design and installation techniques to achieve effective air barrier performance in various climates and building applications.\n\n\nRegister Now \nSamuel Cowlishaw\, Director of Marketing\, Selena USA 
URL:https://airbarrier.org/event/beyond-the-sill-seal-a-modern-approach-to-air-barriers-for-long-lasting-building-enclosures-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/08/Website-Slide-28820px-x-820px-29-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20250826T140000
DTEND;TZID=America/Detroit:20250826T153000
DTSTAMP:20260409T065827
CREATED:20250718T181419Z
LAST-MODIFIED:20250721T154432Z
UID:990000118-1756216800-1756222200@airbarrier.org
SUMMARY:IFAD - Failure is Not an Option: Air Barrier Continuity Strategies for Storefront and Curtain Wall Systems 1.5 CEU/HSW
DESCRIPTION:Failure is Not an Option: Air Barrier Continuity Strategies for Storefront and Curtain Wall Systems\nCritical details that typically cause building performance-related issues will be focused on one of the largest failures of building enclosures: wall-to-window connections specific to curtain wall systems and storefronts. A step-by-step look at each critical detail regarding the sequence of construction and the various connections to ensure airtight/watertight and thermally protected details. Real-life photos and job conditions will highlight the realities of the construction process to show typical errors found and how those errors can be addressed correctly. \nLearning Objectives: \n\nAssess how site quality assurance audits\, field observation\, and site quality control fit into overall quality assurance and risk management strategy.\nDetermine the responsibilities of all building enclosure stakeholders to coordinate and execute a plan for a quality installation.\nIdentify typical issues found in the installation process and what caused these for a variety of air barrier systems by visual inspection.\nUsing job site photos; demonstrate the physical testing that can be done on a variety of air barrier systems.\n\nRegister Now \nAndrew Dunlap\, AIA\, NCARB\, LEED AP\, Senior Principal | Building Technology Studio Leader\, SmithGroup
URL:https://airbarrier.org/event/ifad-failure-is-not-an-option-air-barrier-continuity-strategies-for-storefront-and-curtain-wall-systems-1-5-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Flashing-Day-Logo-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20250826T130000
DTEND;TZID=America/Detroit:20250826T135000
DTSTAMP:20260409T065827
CREATED:20250718T180540Z
LAST-MODIFIED:20251006T162049Z
UID:990000117-1756213200-1756216200@airbarrier.org
SUMMARY:IFAD - Masonry Thru-Wall Flashing & Key Interface Details 1.0 CEU/HSW
DESCRIPTION:Masonry Thru-Wall Flashing & Key Interface Details\nExplore the continuity of water and air control layers in relation to masonry thru-wall flashing at critical interface details\, including: base-of-wall\, window sill\, openings heads\, shelf angle\, veneer material transitions\, and top-of-wall. \nLearning Objectives: \n\nUnderstand masonry thru-wall flashing function and options\nRealize how masonry thru-wall flashing coordinates with water and air control layers\nGain insights into common installation practices with jobsite photography\nDevelop an appreciation for thorough architectural details at key interface details in exterior wall assemblies\n\nRegister Now \nPat Conway\, AIA\, Director\, Industry Development & Technical Services\, International Masonry Institute \n \nMr. Conway is a registered architect in Wisconsin and has been a masonry consultant for the past 28-years. He is an active member of the American Institute of Architects (AIA) and the Construction Specifications Institute (CSI)\, Director of IMI’s internal Masonry Technical Team\, distinguished masonry speaker and author.
URL:https://airbarrier.org/event/ifad-masonry-thru-wall-flashing-key-interface-details-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Flashing-Day-Logo-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20250826T120000
DTEND;TZID=America/Detroit:20250826T125000
DTSTAMP:20260409T065827
CREATED:20250718T175912Z
LAST-MODIFIED:20250813T195217Z
UID:990000116-1756209600-1756212600@airbarrier.org
SUMMARY:IFAD - The Big Disconnect: Roof to Wall Connections for your Air Barrier 1.0 CEU/HSW
DESCRIPTION:The Big Disconnect: Roof to Wall Connections for your Air Barrier\nAs more states\, jurisdictions and the design community require air barriers\, the issue of connecting the wall air barrier assembly to other building assemblies\, such as below grade\, window systems and roofs need to be completely understood in order to design and construct a functioning building enclosure. One of the most often missed or not well executed details is the connection between the wall air barrier and roof assembly. With a myriad of roof systems\, wall configurations and the growing number of wall air barrier products\, it can be difficult to navigate the process in regards to what systems work best with each other and the chemical compatibility of these systems. This presentation will focus on things to consider from a design standpoint\, along with practical approaches to ensuring a robust connection is constructed and executed. \nLearning Objectives: \n\nUnderstand why the roof/wall air barrier intersection is critical to building performance in regards to moisture management and air leakage control and common design and field errors\nBecome aware of compatibility issues related to wall and roof air barrier components for the myriad of air barrier and roofing assemblies that exist on the market today\nIdentify pre-construction coordination items to review and allocation of responsibilities to sub-trades for proper execution of connection\nReview requirements for detailing the roof/wall interface and the sequence of construction for most common roof/wall air barrier connections\n\nRegister Now \nMelissa Payne\, BECxP\, CxA+BE\, CDT \nMelissa I. Payne focuses on offering building enclosure third-party services. She founded Midwest Enclosure Consulting in September 2022 to offer owners\, design\, and construction teams expertise in building science\, building envelope solutions\, forensic investigations\, as well as building performance assessments and construction onsite inspections.\nMs. Payne joined Tremco CPG Inc. on November 1\, 2018\, as a Construction Management Specialist. She then managed the Enclosure System Solutions Team and administered the MyTEAM Leak-Free Warranty Processes and Services till April 25\, 2023\, at which time the company decided these services would no longer be offered under Tremco CPG\, Inc.\nPrior to joining Tremco\, she provided building enclosure commissioning and consulting service and conducted forensic investigations on a multitude of projects while at Miller Engineering\, P.C. Prior to developing and heading the building enclosure division at Miller\, she served as the Owner’s Representative on both capital and non-cap construction and restoration projects for City Utilities of Springfield\, Missouri\, a municipal utility company. \nMs. Payne possesses a strong foundation in industry standards related to building envelope commissioning processes\, commissioning authority\, building science\, construction observation\, performance testing\, project management\, and general construction of building envelope systems\, including institutional\, schools\, higher education\, government\, healthcare\,\nhospitality\, and industrial projects. Her owner representative\, third-party consulting experience\, forensic work\, commissioning provider background\, and manufacturer internal consultant involvement give her an all-enveloping perspective of the design and construction industry. Currently\, she works with owners\, architects\, engineers\, designers\, construction managers/general contractors\, and enclosure trades to promote the integrity and performance of building enclosures. She is known for bringing collaboration to the design and construction process. She focuses on bridging the gap in design and construction with design review services\, development of project-specific details\, construction observation\, and documentation\, and focuses on mitigating risks as they relate to the design and construction of the building enclosure system.
URL:https://airbarrier.org/event/ifad-the-big-disconnect-roof-to-wall-connections-for-your-air-barrier1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Flashing-Day-Logo-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20250826T110000
DTEND;TZID=America/Detroit:20250826T115000
DTSTAMP:20260409T065827
CREATED:20250718T170456Z
LAST-MODIFIED:20250721T154504Z
UID:990000115-1756206000-1756209000@airbarrier.org
SUMMARY:IFAD - Flashing 101 1.0 CEU/HSW
DESCRIPTION:Flashings 101\nThis presentation will cover a detailed explanation of various types of flashings used in buildings\, including the challenges and solutions facing through wall flashings. It will include a thorough description of the characteristics of several types of membranes\, emphasize the importance of compatibility\, and review proper installation techniques. \nRegister Now \nMeagan Elfert\, CDT\, MBA\, CBS\, Vice President\, York Flashings \nWith over a decade of dedicated service at York Flashings\, Meagan Elfert\, CDT\, MBA\, CBS currently serves as Vice President\, bringing strategic leadership and a results-driven approach to York. She manages York’s sales team across all regions of the USA\, ensuring that York remains a leader in the building products industry and reinforcing York’s reputation for quality and innovation. Meagan gives presentations on flashing and transition compatibility\, sustainability\, and performance to the AEC community across the country. She also provides educational sessions for contractors and performs job site visits to bring installers the latest technology and best flashing practices. 
URL:https://airbarrier.org/event/ifad-flashing-101-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Flashing-Day-Logo-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20250826T100000
DTEND;TZID=America/Detroit:20250826T105000
DTSTAMP:20260409T065827
CREATED:20250718T165409Z
LAST-MODIFIED:20250721T154514Z
UID:990000114-1756202400-1756205400@airbarrier.org
SUMMARY:IFAD - Air Barrier Flashing Details 1.0 CEU/HSW
DESCRIPTION:Air Barrier Flashing Details\nThe realities of construction\, including construction and substrate material tolerances\, an unlimited amount of project-specific detailing\, and different product types and manufacturers\, will directly affect the installation of air barrier detailing and flashings. How the Designer and Contractor detail and install the flashing must consider the realities of construction and product detailing. We will review the many aspects of construction\, what to account for when detailing and installing flashings\, and understand why specific details are needed. Understanding what to account for will provide better design\, documentation\, estimating\, and installation. \nLearning Objectives: \n\nIdentify typical areas of concern about the design and installation constructability and coordination between all the trades and adjacent building components.\nDiscuss the need for a mock-up and apply testing to the mock-up to confirm assumptions in sequence.\nCreate a sequence and action plan for detailing and materials\nLearn how to prevent constructability/compatibility issues before construction.\n\nRegister Now \nCorey Zussman\, AIA\, NCARB\, ALA (IL\, IN\, WI)\, RBEC\, RRC\, REWC\, RWC\, RRO\, CABS\, CCQM\, CDT\, CQM\, CxA+BE\, BECxP\, LEED AP BD+C\, Level II Thermographer\, QA/QC Vice President\, AECOM Hunt Construction \nAs a forensic architect registered in several states\, Corey Zussman has practiced in the construction industry for over 30 years. He specializes in the building envelope\, restoration\, preservation\, life safety\, and interior finishes. While working on over 2000 projects\, Corey conducts constructability reviews\, pre-installation meetings\, comprehensive envelope meetings\, and construction observations. He has also become known for providing educational opportunities throughout the industry and has produced more than 200 “lessons learned” papers.  Topics include building envelope and life safety concerns\, enabling Corey to proactively address issues during design review\, pre-construction\, and construction. In addition\, he has over 15 industry articles about building envelope and life safety topics. He is also a frequent presenter at local and national conferences and associations with over 50 AIA accredited presentations.
URL:https://airbarrier.org/event/ifad-air-barrier-flashing-details-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/Flashing-Day-Logo-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20250821T130000
DTEND;TZID=America/Detroit:20250821T140000
DTSTAMP:20260409T065827
CREATED:20250529T181244Z
LAST-MODIFIED:20250808T153113Z
UID:990000072-1755781200-1755784800@airbarrier.org
SUMMARY:Sealing Joints in the Building Envelope 1.0 CEU/HSW
DESCRIPTION:Sealing Joints in the Building Envelope\nJoint failure is one of the most common—and costly—causes of moisture intrusion in buildings. This seminar addresses the often-overlooked disconnect between architects selecting joint sealants and engineers calculating joint movement. When the selected sealant’s movement capability isn’t aligned with actual joint movement\, failure is inevitable. In Sealing the Building Envelope\, participants will gain practical insight into common design oversights and how to avoid them. The program explores: *Why buildings leak: Forces behind moisture ingress and vulnerable locations in the building envelope *Joint types and common design pitfalls: From structural expansion joints to cladding interfaces *Sealant technologies: A comparison of traditional and innovative joint sealant solutions *Design versatility and performance metrics: Covering fire ratings\, acoustics\, thermal values\, and more *Installation best practices: Including quality management strategies and the use of checklists \nLearning Objectives: \n\n Analyze how watertight\, energy efficient\, fire-rated expansion joints are the consequence of a process in which we: Design\, Detail\, Specify\, Bid\, Erect\, Manufacture\, & Install in 3-D.\n Become familiar with product technologies and how to apply them.\n Understand why it is critical to require certified performance reports in your specification.\nKnow that your next building can be a watertight structure.\n\n\nRegister Now \nGlenn Leondike\, Regional Sales Manager\, Emseal Joint Systems \nGlenn Leondike has accumulated over 13 years of valuable experience in the construction industry\, specializing in waterproofing solutions. Prior to his tenure at EMSEAL Joint Systems\, where he has excelled for over a decade\, Glenn served as a waterproofing estimator at Chamberlain Roofing and Waterproofing. His extensive background in both technical expertise and project management has contributed significantly to the success of various construction projects throughout his career.
URL:https://airbarrier.org/event/sealing-joints-in-the-building-envelope-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/08/Website-Slide-28820px-x-820px-29.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20250814T130000
DTEND;TZID=America/Detroit:20250814T140000
DTSTAMP:20260409T065827
CREATED:20250529T171945Z
LAST-MODIFIED:20250808T153100Z
UID:990000071-1755176400-1755180000@airbarrier.org
SUMMARY:Development of Non-Destructive /Non-Invasive Techniques for Assessing Building Envelope Performance: Air Leakage & High Moisture 1.0 CEU/HSW
DESCRIPTION:Development of Non-Destructive /Non-Invasive Techniques for Assessing Building Envelope Performance: Air Leakage & High Moisture\nAssessing the performance of building envelopes is becoming more important\, especially when retrofitting existing buildings. Using non-destructive methods for these assessments is ideal because they are usually quicker and cheaper than destructive means. In this presentation we will discuss available non-destructive and non-invasive technologies for assessing the building envelope and then describe two novel techniques being developed at the Oak Ridge National Laboratory. The first is an application of background oriented Schlieren photography to enable visualization and even measurement of air flow from leakage points in the building envelope. The second technology uses radar to look inside the building envelope to measure the moisture content of wood sheathing\, a critical layer when assessing the envelopes moisture durability. For each of these technologies we will explain how they work and our progress in developing them for eventual commercialization. \nLearning Objectives: \n\n Describe widely used non-destructive testing techniques to assess the building envelope.\n Discuss why locating and sealing air leakage in building is important.\nExplain how cameras can be used to see air leakage.\nExplain how radar can be used to measure moisture content.\n\n\nRegister Now \nPhilip Boudreaux\, R&D Staff\, Oak Ridge National Laboratory \nPhilip Boudreaux is an R & D associate staff member in the Building Envelope Materials Research Group at Oak Ridge National Laboratory. His training and early career experience is in physics and optics and since 2008 has been working in the building research area. Over the past few years he has been able to apply his past optics expertise to buildings. He is working on non-intrusive testing techniques so that building performance assessment can be done easier\, quicker\, and cheaper. This will better enable building retrofits that save energy and decrease emissions.
URL:https://airbarrier.org/event/development-of-non-destructive-non-invasive-techniques-for-assessing-building-envelope-performance-air-leakage-high-moisture1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/08/Website-Slide-3.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20250807T130000
DTEND;TZID=America/Detroit:20250807T140000
DTSTAMP:20260409T065827
CREATED:20250529T170550Z
LAST-MODIFIED:20250730T201952Z
UID:990000070-1754571600-1754575200@airbarrier.org
SUMMARY:Building Enclosure Commissioning (BECx) 1.0 CEU/HSW
DESCRIPTION:Building Enclosure Commissioning (BECx)\nAs the construction industry evolves\, Building Envelope Commissioning (BECx) is emerging as a crucial practice that building owners increasingly recognize for its value across new construction\, retrofits\, and existing buildings. With rising expectations for weathertightness and energy efficiency\, the role of the building envelope in overall performance\, operational costs\, and occupant wellbeing has never been more critical. In this session\, we will explore the foundations of BECx\, which adapts the commissioning processes traditionally applied to MEP (Mechanical\, Electrical\, and Plumbing) systems\, extending those principles to the building enclosure. Attendees will gain insights into the current state of BECx standards\, certifications\, and execution practices\, which are rapidly evolving. This discussion will address the benefits of integrating BECx into the project to enhance building performance and meet modern energy demands. We will also highlight case studies showcasing successful BECx implementation\, emphasizing the benefits of this proactive approach. Join us to deepen your understanding of BECx and equip yourself with the basic knowledge needed for implementation\, ensuring your projects not only meet but exceed the growing expectations of building owners and occupants alike. \nLearning Objectives: \n\n Become familiar with the history\, goals\, and benefits of BECx\n Explore existing BECx standards and references\n Be able to identify BECx acronyms and discuss the role of those tasks\nReview the importance of following a disciplined process\n\n\nRegister Now \nCharlie O’Connor\, IIBEC CBECxP\, President\, Advanced Enclosure Consulting \nCharlie O’Connor holds a Bachelor’s in Civil Engineering and a Masters in Construction Management. He worked in project management in the curtainwall industry for 13 years prior to establishing Advanced Enclosure Consulting in 2012. Since then AEC has provided consulting and testing services for building envelope systems at airport terminals\, hotels\, multi-family\, federal courthouses\, education facilities\, manufacturing plants\, office towers\, and secured federal facilities. Charlie is certified by the International Institute of Building Enclosure Consultants as a Certified Building Enclosure Commissioning Provider (CBECxP). He also holds an ASHRAE Building Commissioning Professional (BCxP) certification.
URL:https://airbarrier.org/event/building-enclosure-commissioning-becx1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/05/August-8-Event-Featured-Image.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20250731T130000
DTEND;TZID=America/Detroit:20250731T140000
DTSTAMP:20260409T065828
CREATED:20250529T165408Z
LAST-MODIFIED:20250725T173545Z
UID:990000069-1753966800-1753970400@airbarrier.org
SUMMARY:Case Study on ICF Panel Waterproofing Failures 1.0 CEU/HSW
DESCRIPTION: Case Study on ICF Panel Waterproofing Failures\nThis is a case study on Construction Defects in a $1.3 million new home built with insulated concrete forms (aka ICF panels). ICF is becoming increasingly popular for custom homes and DIYers\, but many details are hard to find\, and many trades are unfamiliar with their unique requirements. In this session\, we will walk you through the process from the first leak detection and all the way to litigation. We will describe our non-destructive testing\, including leak detection\, mold testing\, blower door testing\, infrared thermography and\, my favorite part\, destructive testing. The general contractor was new to building with ICF panels and made one major mistake: assuming they were effectively airtight and watertight. The significant defects included poorly installed foundation waterproofing\, failure to flash the window/door rough openings\, failure to install through-wall flashings and discontinuity between the roof and wall flashings. Generally\, they failed to create a continuous exterior air and water barrier system at every opportunity. We will discuss the pros and cons of ICF construction and identify the necessary waterproofing and flashing requirements. We will also discuss the conflicts between the ICF requirements and those of other trades\, including carpentry\, masonry\, windows\, and roofing. We will review the necessary scope required to remediate the defects to give the homeowners a safe and dry home. We will then touch on our steps to prepare for a difficult litigation process. \nLearning Objectives: \n\nExplain key design and construction principles of insulated concrete form (ICF) assemblies.\n Identify effective waterproofing methods for ICF foundations.\n Describe proper flashing techniques for window and door openings in ICF walls.\nSummarize testing\, documentation\, and reporting processes used to investigate and support claims involving construction defects.\n\n\nRegister Now \nMichael Williams\, RRC\, RWC\, RRO\, RPA\, RCIF\, CCMI\, BECxP\, CxA+BE\, CIT 1\, President\, Building Envelope Consulting \nMichael Williams hand-nailed his first shingle roof in the summer of 1980 (when Jimmy Carter was still president) and has been in the roofing\, waterproofing and building enclosure business ever since. He started his own roofing company in Nebraska in 1992\, specializing in the installation of standing seam and architectural metal products. Michael sold his company and moved to the Washington DC area in 2000 and became a roofing and waterproofing consultant for a local engineering firm and over the next decade became an expert at built up and single ply roofing\, exterior walls\, plaza decks\, coatings\, flashing\, air barriers\, doors and windows. He established Building Envelope Consulting\, LLC\, in 2010.
URL:https://airbarrier.org/event/case-study-on-icf-panel-waterproofing-failures-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/05/Website-Slide-2.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20250724T130000
DTEND;TZID=America/Detroit:20250724T140000
DTSTAMP:20260409T065828
CREATED:20250529T164101Z
LAST-MODIFIED:20250722T150004Z
UID:990000068-1753362000-1753365600@airbarrier.org
SUMMARY:NIST Clearing House for Infiltration Modeling Purposes (CHIMP) 1.0 CEU/HSW
DESCRIPTION:NIST Clearing House for Infiltration Modeling Purposes (CHIMP)\nInfiltration is the unintended and uncontrolled air leaking into a building through intentional and unintentional openings. While infiltration has been used to fulfill outdoor air requirements in buildings\, it is not generally accepted as a “best practice” anymore. But how much infiltration can you expect in a building? Empirical models for infiltration are available but they were developed for low-rise residential buildings. This presentation will present novel ways of modeling infiltration in commercial buildings and the implications on energy use. CHIMP is the Clearing House for Infiltration Modeling Purposes\, which provides a central resource where users can obtain information\, data\, and tools to facilitate the modeling of infiltration in a variety of analysis tools (e.g.\, CONTAM\, EnergyPlus\, etc). Since 2012\, NIST has been developing models\, datasets\, and tools for estimating the effects of infiltration on heating\, ventilating\, and air-conditioning (HVAC) related energy use. CHIMP is the one-stop shop for your infiltration modeling needs and is updated when new work is released. \nLearning Objectives: \n\nUnderstand what infiltration is\nUnderstand the benefits of modeling infiltration properly\nUnderstand where to find infiltration modeling tools\nUnderstand how to incorporate novel infiltration modeling methods into your workflow\n\n Register Now \nLisa Ng\, PhD\, Acting Division Chief\, National Institute of Standards and Technology (NIST)  \nDr. Lisa Ng is the Group Leader of the Indoor Air Quality and Ventilation Group at NIST and has over 13 years of experience in research in airflow and indoor air quality performance in buildings. Her work is focused on airflow and indoor air quality performance in buildings\, with a focus on low energy buildings as well as energy efficiency design and operation strategies in general. She is active in the development of strategies for incorporating more accurate infiltration estimates in building energy models and the application of multizone airflow and indoor air quality (IAQ) models to a range of building performance issues. Lisa is an active member of ASHRAE and IBPSA\, and has collaborated with the ABAA Research Committee on projects related to infiltration modeling and quantifying the impacts of improved airtightness on commercial and residential buildings.
URL:https://airbarrier.org/event/nist-clearing-house-for-infiltration-modeling-purposes-chimp-1-0-ceu-hsw/
CATEGORIES:CEU Webinars
ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/07/8.png
END:VEVENT
END:VCALENDAR