BEGIN:VCALENDAR VERSION:2.0 PRODID:-//ABAA - ECPv6.15.17.1//NONSGML v1.0//EN CALSCALE:GREGORIAN METHOD:PUBLISH X-ORIGINAL-URL:https://airbarrier.org X-WR-CALDESC:Events for ABAA REFRESH-INTERVAL;VALUE=DURATION:PT1H X-Robots-Tag:noindex X-PUBLISHED-TTL:PT1H BEGIN:VTIMEZONE TZID:America/Detroit BEGIN:DAYLIGHT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 TZNAME:EDT DTSTART:20240310T070000 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:-0400 TZOFFSETTO:-0500 TZNAME:EST DTSTART:20241103T060000 END:STANDARD BEGIN:DAYLIGHT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 TZNAME:EDT DTSTART:20250309T070000 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:-0400 TZOFFSETTO:-0500 TZNAME:EST DTSTART:20251102T060000 END:STANDARD BEGIN:DAYLIGHT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 TZNAME:EDT DTSTART:20260308T070000 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:-0400 TZOFFSETTO:-0500 TZNAME:EST DTSTART:20261101T060000 END:STANDARD BEGIN:DAYLIGHT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 TZNAME:EDT DTSTART:20270314T070000 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:-0400 TZOFFSETTO:-0500 TZNAME:EST DTSTART:20271107T060000 END:STANDARD END:VTIMEZONE BEGIN:VEVENT DTSTART;TZID=America/Detroit:20251211T170000 DTEND;TZID=America/Detroit:20251211T180000 DTSTAMP:20260409T172703 CREATED:20251016T134516Z LAST-MODIFIED:20251103T211117Z UID:990000183-1765472400-1765476000@airbarrier.org SUMMARY:Introduction to Spray Polyurethane Foam (SPF) for the Building Enclosure 1.0 CEU/HSW DESCRIPTION:Introduction to Spray Polyurethane Foam (SPF) for the Building Enclosure\nThis course provides a complete overview of spray polyurethane foam (SFP) technology and applications for residential and commercial buildings. It covers a brief history\, types of products and installation equipment. A review of chemical safety and environmental impact is provided\, along with SPF performance for heat\, air and moisture control. Examples of residential and commercial applications are provided\, with references to compliance with US building codes. \nLearning Objectives: \n\nReview of SPF development history and product types and applications for residential and commercial construction.\n Discuss health and safety aspects of SPF\, including chemical safety\, fire safety and environmental impacts.\n Define performance of SPF materials in regard to heat\, air and moisture control in the building enclosure\n Review ICC building code requirements for SPF insulation and roofing systems\n\nRegister Now \nRichard Duncan\, PhD Engineering\, Professional Engineer (PA)\, Technical Consultant\, Envelogic \n Rick has more than 30 years experience in mechanical\, architectural and materials engineering\, developing a wide range of building materials and products for the building enclosure. From 2008 to 2024\, he serviced as Technical and Executive Director for the Spray Polyurethane Foam Alliance (SPFA). Prior to joining SPFA\, Rick served as Global New Product Director for CertainTeed/Saint Gobain Insulation. He has a bachelor of science in mechanical engineering ( U of Maryland) and master of science in Mechanical Engineering (Bucknell)\, and a PhD in Engineering Science and Mechanics (Penn State). He is a registered professional engineer in Pennsylvania. URL:https://airbarrier.org/event/introduction-to-spray-polyurethane-foam-spf-for-the-building-enclosure-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/10/Live-Rewind-Event-Image.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20251211T181500 DTEND;TZID=America/Detroit:20251211T191500 DTSTAMP:20260409T172703 CREATED:20251016T162328Z LAST-MODIFIED:20251103T211126Z UID:990000184-1765476900-1765480500@airbarrier.org SUMMARY:Blown Away - Unmasking the Secrets of Whole Building Airtightness Testing 1.0 CEU/HSW DESCRIPTION:Blown Away – Unmasking the Secrets of Whole Building Airtightness Testing\nWhole building airtightness testing has been a code compliance option in the International Energy Conservation Code and ASHRAE 90.1 for some time. That compliance option was rarely used and only became mandatory as part of a building owners’ requirements\, or a specific state or jurisdictional requirement that was limited to one or two states. \nAs we moved towards Net Zero\, building codes “tightened” up and it is expected this will become a test that is mandatory on a more country wide basis. It seems that time has arrived\, with many states now requiring mandatory whole building airtightness testing. As we move towards those requirements\, it is important to understand the latest in test methods\, current and projected code requirements\, how to specify the test properly\, coordination needed with the construction team and what type of pre-qualifications exists that you can rely upon. \nLearning Objectives: \n\n Identify the current building code requirements on both the national and local levels\, plus the must-know details of eco-friendly building programs that are trending right now.\nArticulate what the airtightness test provides and how those results can be used to improve the building enclosure\n Define the differences among the various test methods available as code or specification options\n Review guide specification sample language and typical pitfalls in current specifications\nIdentify credentialing programs that can help you find pre-qualifications of testing personnel for large buildings\n\nRegister Now \nDenali Jones\, P.E.\, Technical Director\, Air Barrier Association of America \nDenali is an engineer focused on building enclosures for his entire career. After working for a manufacturer he transitioned into consulting\, working for one of the leading building science firms in North America for over a decade. Denali’s work focused on finding practical and performance driven solutions to complex enclosure problems\, ranging from high-rise office towers to hospitals\, multifamily\, manufacturing facilities\, and everything in between. He has extensive experience in all aspects of enclosure design\, including roofing\, glazing systems\, horizontal waterproofing\, below grade waterproofing\, air barriers\, and rainscreen wall assemblies with just about any type of cladding. Denali also is an industry leading expert in whole-building air leakage testing\, having helped develop several test standards and code language around testing requirements. He was instrumental in developing ABAA’s whole-building air leakage testing training program and is the lead instructor for this program. Denali now serves as the technical director for ABAA\, focusing on driving the adoption and advancement of air barriers both at a committee level as well as providing support for ABAA members in answering technical questions or delivering presentations and training. URL:https://airbarrier.org/event/blown-away-unmasking-the-secrets-of-whole-building-airtightness-testing-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/10/Live-Rewind-Event-Image.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20251218T100000 DTEND;TZID=America/Detroit:20251218T110000 DTSTAMP:20260409T172703 CREATED:20251016T165506Z LAST-MODIFIED:20251103T211254Z UID:990000185-1766052000-1766055600@airbarrier.org SUMMARY:Building Envelope Case Study: From Initial Construction Through Occupancy 1.0 CEU/HSW DESCRIPTION:Building Envelope Case Study: From Initial Construction Through Occupancy\nJoin me as I recount my building envelope journey with a large four-story CMU and masonry higher-educational building for a large university in the Midwest. We will start with the initial pre-bid constructability review and go through construction and turnover. We will review the air/vapor barrier\, masonry flashing\, waterproofing\, window installation\, and roof transitions. We will learn what was initially missing in the Contraction Documents through mock-ups and first-work-in-place reviews. Once construction starts\, we will review the building construction and perform testing throughout. \nLearning Objectives: \n\n Review constructability concerns in the mid-stage of design\nEngage with a building envelope review and what modifications took place with subcontractor input\nUnderstand the building complexities with mock-ups\, first-work-in-place reviews\, and testing.\nDevelop a better understanding of the installation of materials and the process of installation with construction observation reviews \, reporting\, and verification\n\nRegister Now \nCorey Zussman\, AIA\, NCARB\, ALA (IL\, IN\, WI) RBEC\, RRC\, REWC\, RWC\, RRO\, CABS\, CDT CQM\, CxA+BE\, BECxP\, LEED AP BD+C Level II Thermographer\, QA/QC Vice President\, AECOM Hunt Construction \nAs a forensic architect registered in several states\, Corey Zussman has practiced in the construction industry for more than 30 years. He specializes in the building envelope\, restoration\, preservation\, life safety\, and interior finishes. While working on an average of 50-75 projects a year\, Corey conducts constructability reviews\, pre-installation meetings\, comprehensive envelope meetings\, and construction observations. He has also become known for providing educational opportunities throughout the industry and has produced more than 150 “lessons learned” papers. Topics include building envelope and life safety concerns and enable Corey to proactively address issues during design review\, pre-construction\, and construction. In addition\, he has over 10 industry articles about building envelope and life safety topics and is also a frequent presenter at local and national conferences and Associations. URL:https://airbarrier.org/event/building-envelope-case-study-from-initial-construction-through-occupancy-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/10/Live-Rewind-Event-Image.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20251218T111500 DTEND;TZID=America/Detroit:20251218T121500 DTSTAMP:20260409T172703 CREATED:20251216T211029Z LAST-MODIFIED:20251216T212333Z UID:990000242-1766056500-1766060100@airbarrier.org SUMMARY:If It's Not Raining Why Is My Roof Leaking? 1.0 CEU/HSW DESCRIPTION:If It’s Not Raining\, Why Is My Roof Leaking?\nRoof leaks and moisture within wall assemblies are never good for building performance. The typical response is to search for a rain-related leak—until it becomes clear that it isn’t raining at all. Without rainfall\, bulk water entry should not be occurring\, yet moisture continues to appear in the building enclosure. Too often\, the real causes are overlooked because not all mechanisms of moisture transport are considered. This leads many to incorrectly assume the issue lies with the perm rating of the water-resistive barrier. This presentation examines all primary modes of moisture movement within buildings\, explains why relying on the perm rating of a single material is misleading\, and reveals how moisture—often in significant volumes—can accumulate within the building envelope. \nLearning Objectives: \n\nIdentify the primary mechanisms of moisture transport in building envelopes\nDescribe the two most common causes of moisture accumulation in buildings\nExplain why water vapor transmission rate alone is an unreliable indicator of moisture risk\nDiscuss how and why moisture-related building problems tend to worsen over time\n\nRegister Now \nLaverne Dalgleish\, Executive Director\, ABAA \nMr. Laverne Dalgleish is the Executive Director of the Air Barrier Association of America (ABAA). As such\, he works to champion energy conservation in buildings while educating the building owners and designers about the benefits of energy conservation such as durability\, comfort\, reduced maintenance\, reduced HVAC equipment costs and the positive impact on the environment. \nMr. Dalgleish travels North America on a weekly basis to educate building owners and designers on the benefits of effective and working air barrier systems in buildings. This education mission includes working with standards development organizations\, training and education groups\, government policy departments\, and quality assurance program developers for the construction industry. Mr. Dalgleish is the Secretariat of two ISO Committees\, ISO TC61 SC10 Cellular Plastics and ISO TC163 SC3 Thermal Insulation Products. He is also Chair of the ULC Thermal Performance in the Building Environment Standards Committee. \nMr. Dalgleish was the key developer of the ABAA Quality Assurance Program for the installation of air barrier systems in buildings. This program is based on ISO9000 and ISO 12576-2 but brings the ISO requirements together with practical applications for the air barrier industry. URL:https://airbarrier.org/event/if-its-not-raining-why-is-my-roof-leaking-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/10/Live-Rewind-Event-Image.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20251218T123000 DTEND;TZID=America/Detroit:20251218T133000 DTSTAMP:20260409T172703 CREATED:20251016T174201Z LAST-MODIFIED:20251103T211236Z UID:990000187-1766061000-1766064600@airbarrier.org SUMMARY:Peeling Back the Onion 1.0 CEU/HSW DESCRIPTION:Peeling Back the Onion\nThis presentation is an in-depth dive into a leak investigation at a high school Industrial Arts and Horticulture Building that snowballed into a remedial architecture project and then escalated further with discoveries that raised structural red flags and created an expansion to the original scope of work. While investigating water damage\, additional nonconforming conditions were uncovered and additional areas had to be opened\, revealing even more questionable building practices. In the end\, the structure of the south façade was replaced\, as well as 1/3 of the roof structure\, and the entire building was “re-skinned”. Due to the nature of the failures\, this project also became a case for litigation. \nThis presentation is presented as a Case Study that covers the timeline of the project from the initial investigation\, the layers of additional discoveries\, the remedial design\, and the construction process while briefly covering the litigation that followed. Throughout the timeline\, each layer of the onion is pulled back for discussion\, as well as to inform attendees of how each of those issues was overcome. \nLearning Objectives: \n\n Through a Case Study of a completed K-12 project\, participants will examine the importance of regular on-site QA/QC observations during the construction process\n Participants will discuss the importance of continuity between air and water barrier systems and how lapping and transitions between adjacent systems are often incorrectly addressed\n Participants will discuss the importance of well-planned and coordinated building maintenance plans in relation to an existing real-world project.\nParticipants will acquire a better understanding of sequencing and constructability and how what is drawn relates to what is actually constructed.\n\nRegister Now \nNathan Taylor\, CSI\, CDT\, Associate\, Building Enclosure Consultant\, DTR Consulting Services \nNathan Taylor\, CSI\, CDT\, is an accomplished international professional with extensive architectural design and building envelope experience. He holds a Master’s degree in Architecture and Urban Planning and is highly involved in CSI. Nathan oversees the Construction Phase Services and Forensic Investigation scope of project work at DTR Consulting Services. He is an advocate for spending time on construction sites and “learning by doing”. He is passionate about drawing as a form of design communication and hosts an annual Architectural-themed drawing event each October. He and his family live in northern California and enjoy spending time outdoors. He stays actively creative by drawing and writing novels in his free time. URL:https://airbarrier.org/event/peeling-back-the-onion-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/10/Live-Rewind-Event-Image.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20251218T123000 DTEND;TZID=America/Detroit:20251218T133000 DTSTAMP:20260409T172703 CREATED:20251016T175003Z LAST-MODIFIED:20251203T172240Z UID:990000188-1766061000-1766064600@airbarrier.org SUMMARY:Designing Wall Systems for Specific Climate Zones 1.0 CEU/HSW DESCRIPTION:Designing Wall Systems for Specific Climate Zones\nCopying and pasting a wall or roof assembly that works in one part of our country into a project in another part of the country could be not just problematic\, but potentially catastrophic. This presentation will use data and hygrothermal modeling to articulate what happens when tried and true assemblies from one part of the country get moved to a very different climate. More importantly\, we’ll cover strategies to mitigate these issues. While many may be familiar with a Class I Vapor Retarder (“vapor barrier”) in the wrong part of an assembly\, we’ll also cover the impacts of insulation type\, the overreaction to perm ratings\, light-colored roofing membranes\, and reservoir claddings such as stucco and unit masonry. \nLearning Objectives: \n\nLearn climate-specific design strategies for durable construction.\nLearn to avoid common mistakes that can lead to mold\, rot\, mildew\, corrosion and decay.\nUnderstand how hygrothermal modeling can be used in the design process to ensure durability.\nLearn how material properties (permeability\, heat capacity\, density\, conductivity\, and porosity) impact wall assemblies.\n\nRegister Now \nJohn Posenecker\, P.E.\, Senior Principal And Regional Facilities Manager\, Terracon Consultants\, Inc.  \nJohn Posenecker is the Senior Principal and the Building Enclosure Practice Leader for Terracon Consultants\, Inc. He is a registered engineer in the State of Texas and Oklahoma. His experience includes the design\, construction\, testing and forensic investigation of building envelope systems. Previously\, he was an Estimating Manager with Chamberlin Roofing and Waterproofing from 2005 through 2015\, Project Manager for Advanced Environmental Concepts from 1997 through 2005\, an Engineering Team Leader at Southern Company Services from 1987 through 1997\, and a Senior Engineer with Bechtel Power from 1982 to 1987. \nThroughout his career\, Mr. Posenecker has participated in a wide variety of projects associated with the building envelope that include containment systems for commercial nuclear power plants; noise control systems for commercial and institutional projects; and waterproofing for commercial high-rise office and multi-family buildings\, medical and educational institutional projects\, and large concrete structural projects. Mr. Posenecker specializes in waterproofing and cladding systems associated with the building envelope. He is an active member in several professional organizations including the National Institute of Buildings Sciences (NIBS)\, the American Society for Testing and Materials (ASTM)\, the International Concrete Restoration Institute (ICRI). He is also on the executive committee for the National Building Enclosure Council. \n\nKayla Maines\, AIA\, Senior Architect\, Terracon Consultants\, Inc\, \nKayla Maines joined Austin Terracon-Facilities in May of 2018. She is a Registered Architect in the state of Texas and Oklahoma\, Legacy LEED AP\, and Building Enclosure Commissioning Provider (BECxP) and a Commissioning Authority +Building Enclosure (CxA+BE) She has 17 years of experience that includes managing projects from Schematic Design through Construction Administration\, multidiscipline coordination\, peer reviews\, design assistance\, building assessments\, reviews submittals and shop drawings\, performs field observations and building enclosure testing\, historic preservation\, and building enclosure commissioning. Kayla was the 2020 Chair of the Austin Building Enclosure Council (BEC: Austin) and currently serves as a board member for BEC: Austin. She also serves as the Secretary of the Austin Construction Specification Institute (CSI). Mrs. Maines is a Terracon Subject Matter Expert (SME) for Building Enclosure Commissioning (BECx) and an Authorized Project Review (APR). URL:https://airbarrier.org/event/designing-wall-systems-for-specific-climate-zones-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/10/Live-Rewind-Event-Image.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20251218T150000 DTEND;TZID=America/Detroit:20251218T160000 DTSTAMP:20260409T172703 CREATED:20251016T175555Z LAST-MODIFIED:20251103T211213Z UID:990000189-1766070000-1766073600@airbarrier.org SUMMARY:Air Barrier Installation & Quality Control Fundamentals 1.0 CEU/HSW DESCRIPTION:Air Barrier Installation & Quality Control Fundamentals\nJoin us for an informative presentation that emphasizes the importance of proper air barrier application in enhancing building performance. Properly installed air barriers are critical in preventing air leakage\, which can lead to energy inefficiencies\, moisture issues\, and compromised indoor air quality. \nWe will delve into best practices for air barrier application\, highlighting the techniques that ensure continuity and effectiveness. Attendees will learn about common challenges faced during installation and the vital role of quality control in maintaining the integrity of the air barrier system. \nThrough real-world project photo’s\, we’ll illustrate key application requirements for a variety of air barrier materials and exactly what to look for when performing quality control and site-testing. \nLearning Objectives: \n\n Understand and demonstrate the essential techniques for proper air barrier installation\, ensuring continuity and effectiveness in various building applications.\nIdentify common pitfalls and obstacles in air barrier application\, and learn strategies to overcome these challenges to maintain optimal performance.\nUnderstand the importance of quality control processes during installation\, and learn specific inspection methods and testing protocols to ensure air barrier integrity.\nAnalyze real-world case studies to distinguish between effective and ineffective air barrier installations\, understanding the long-term consequences of proper application and maintenance.\n\nRegister Now \nMelissa Payne\, BECxP\, CxA+BE\, CDT\, Building Enclosure Consulting – Forensics Owner\, Midwest Enclosure Consulting\, LLC \nMelissa I. Payne focuses on offering building enclosure third-party consulting services. She founded Midwest Enclosure Consulting\, LLC September 2022\, where she focuses to help clients mitigate risk and to provide building envelope solutions no matter the structure’s phase – design\, construction\, or operation. Ms. Payne possesses a strong foundation in industry standards related to building envelope commissioning processes\, commissioning authority\, building science\, construction observation\, performance testing\, project management\, and general construction of building envelope systems including institutional\, schools\, higher education\, government\, healthcare\, hospitality\, and industrial projects. Her owner representative\, third-party consulting experience\, forensic work\, commissioning provider background\, and manufacturer internal consultant involvement gives her an all-enveloping perspective of the design and construction industry. Currently she works with owners\, architects\, engineers\, designers\, construction managers/general contractors\, and enclosure trades to promote the integrity and performance of building enclosures. She is known for bringing collaboration to the design and construction process. She focuses on bridging the gap in design and construction with design review services\, development of project specific details\, construction observation and documentation\, and focuses on mitigating risk as they relate to the design and construction of the building enclosure system. URL:https://airbarrier.org/event/air-barrier-installation-quality-control-fundamentals-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/10/Live-Rewind-Event-Image.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20251218T161500 DTEND;TZID=America/Detroit:20251218T171500 DTSTAMP:20260409T172703 CREATED:20251016T183536Z LAST-MODIFIED:20251103T211158Z UID:990000190-1766074500-1766078100@airbarrier.org SUMMARY:Continuous Insulation Compared Within Eight Steel Stud Wall Assemblies 1.0 CEU/HSW DESCRIPTION:Continuous Insulation Compared Within Eight Steel Stud Wall Assemblies\nContinuous Insulation\, while required by the energy code\, presents challenges integrating it with the overall wall-assembly’s design\, performance and construction. This program at the intermediate to advanced level\, comparatively studies eight steel-stud commercial wall assemblies with considerations including: Overview of the Assembly components\, High-performance Net-Zero Energy\, WUFI thermal and moisture modeling comparisons\, NFPA 285 and fire-rated compliance. \nLearning Objectives: \n\n OVERVIEW OF EIGHT ASSEMBLES: Understand the rationale of the eight commercial steel stud-framed wall-assemblies and how they compare with their types of continuous and total insulation\, sheathing\, air\, water and vapor control layers.\n HIGH-PERFORMANCE\, NET-ZERO ENERGY: Compare how each wall may comply or exceed the energy codes and become super-insulated to meet high-performance ASHRAE 189 requirements.\n AVOID PROBLEMS: Illustrate how more insulation can present problems with trapped moisture and condensation.\n WUFI: Understand how each assembly compares utilizing WUFI Hygrothermic (thermal and moisture) evaluations over four climate seasons chosen for Climate Zone 5 (due to the requirement for an interior vapor retarder).\n\nRegister Now \nDavid Schoenhard\, AIA\, Manager & Principal\, DSS-Philly \nDavid Schoenhard\, AIA has over 45 years’ experience in designing fine architecture\, with the last nine as the Principal of DSS-Philly\, one of the leading High-Performance Building Enclosure consulting firms in the Philadelphia region. He brings his decades of architectural experience to skillfully advise and design\, implement or remediate building enclosures on behalf of other architects\, owners and contractors. He is the inventor and developer of the high-performance Back-Lattice Wall Design. He actively researches comparative building enclosure assemblies\, speaks nationally\, and is an AIA Continuing Education Provider. URL:https://airbarrier.org/event/continuous-insulation-compared-within-eight-steel-stud-wall-assemblies-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/10/Live-Rewind-Event-Image.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260108T130000 DTEND;TZID=America/Detroit:20260108T140000 DTSTAMP:20260409T172703 CREATED:20251124T204729Z LAST-MODIFIED:20251215T201649Z UID:990000231-1767877200-1767880800@airbarrier.org SUMMARY:Saddle Up! Integrating Control Layers at Parapet to Rise Walls Conditions 1.0 CEU/HSW DESCRIPTION: Saddle Up! Integrating Control Layers at Parapet to Rise Walls Conditions\nWater and air leakage\, deterioration\, and biological growth often occur at parapet terminations where adjacent rise walls lack proper integration of air and moisture control layers. These issues typically stem from missing or inadequate detailing\, sequencing\, trade coordination\, and installation—compounded by limited industry standards and general lack of awareness. While most designs rely on two-dimensional details\, complex roof-to-wall interfaces require multi-step\, three-dimensional detailing. Proper construction sequencing\, trade coordination\, and mock-ups—including saddle flashing—are essential. This presentation will review design principles for integrating control layers at complex conditions and demonstrate how freehand sketches\, paper folding\, 3D modeling\, collaboration with trades and manufacturers\, and mock-ups help develop effective saddle flashing details. \nLearning Objectives: \n\n Understand the importance of critical detailing of control layers at complex conditions to avoid air and water-related problems\n Learn effective ways to develop and design successful details at complex conditions that are constructable and durable\n Recognize the importance of considering construction sequencing and trade coordination when developing complex details\n Understand the importance of mock-ups for evaluating detailing\, sequencing and performance testing to ensure water-resistant and airtight designs\n\nRegister Now \nMichael Nagle\, NCARB\, Firmwide Quality Leader | Building Enclosures\, Cannon Design \nIn his role as a firmwide quality leader of building enclosures\, Michael Nagle leads CannonDesign’s building enclosure group\, leads standard development\, performs quality reviews\, and develops in-house training for fellow colleagues in the area of building science fundamentals and building enclosure design. Before joining CannonDesign (a global A/E design firm) in January 2022\, Michael served the industry as a building enclosure consultant while investigating many projects involving water and air leakage\, condensation\, and distress conditions in a variety of building enclosure systems at a leading consulting firm for nearly 20 years. \n  \n\n  \nJacob Morrison\, Associate AIA\, ANFA\, Designer III\, Cannon Design \nJake Morrison is committed to integrating technology to find creative solutions for each project’s unique challenges. At CannonDesign\, he uses metrics derived from iterative modeling and simulation to inform and refine the design process to meet the different needs each client\, project\, and site requirement. In the last 5 years\, Jake has been involved in many large scale projects serving as a building enclosure technical designer. \n  URL:https://airbarrier.org/event/saddle-up-integrating-control-layers-at-parapet-to-rise-walls-conditions-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/11/Saddle-Up_01_08_26-WebsiteSlide.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260115T130000 DTEND;TZID=America/Detroit:20260115T140000 DTSTAMP:20260409T172703 CREATED:20251124T211502Z LAST-MODIFIED:20251215T202324Z UID:990000232-1768482000-1768485600@airbarrier.org SUMMARY:Navigating the Complexities of Expansion Joint System Installation for Stadium Construction 1.0 CEU/HSW DESCRIPTION:Navigating the Complexities of Expansion Joint System Installation for Stadium Construction\nThe installation of expansion joint systems in stadium construction presents unique challenges due to the structural demands and operational requirements of these large-scale venues. This presentation will explore the technical intricacies associated with planning\, coordinating\, and executing expansion joint system installations with particular emphasis on the critical role of effective interfacing with various substrates and the extensive logistical coordination required for a seamless\, water-tight installation. Key discussion points will include the process of ensuring proper preparation and alignment with various substrates\, which are often subject to irregularities and environmental conditions that could impact the performance and longevity of the joint systems. This presentation will reference a confidential new NFL stadium on the East Coast and analyze the importance of pre-installation assessment\, surface preparation\, and substrate compatibility in addressing and/or minimizing issues that could lead to system failure or compromised system integrity. \nLearning Objectives: \n\n Identify the Role and Importance of Expansion Joint Systems in Large-Scale Stadium Projects\n Examine Best Practices for Interfacing Expansion Joints with Concrete Substrates\n Analyze Logistical and Sequencing Challenges in Expansion Joint Installation\n Identify Common Types of Expansion Joint Materials and Installation Challenges\n\nRegister Now \nJack Belanger\, Vice President\, MTN Inc. \nJack Belanger is a Vice President for MTN Inc.\, a national Division-7 waterproofing and specialty contractor. Jack brings over 20 years of experience in commercial construction ranging from maintaining and extending useful lives of new commercial buildings and structures to performing restoration aspects of commercial structures while utilizing leading technologies to ensure building envelope continuity. Jack is proficient in various technologies including below-grade waterproofing systems\, expansion joint systems\, above-grade air/vapor barriers\, joint sealants\, commercial roofing systems\, traffic coatings\, epoxy coatings\, and hot- and cold- applied waterproofing. \n  URL:https://airbarrier.org/event/navigating-the-complexities-of-expansion-joint-system-installation-for-stadium-construction-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/11/Navigating-the-Complexities_1_15_26-WebsiteSlide.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260122T130000 DTEND;TZID=America/Detroit:20260122T140000 DTSTAMP:20260409T172703 CREATED:20251124T221944Z LAST-MODIFIED:20260120T213451Z UID:990000233-1769086800-1769090400@airbarrier.org SUMMARY:Air Barrier Embodied Carbon: A Critical Review 1.0 CEU/HSW DESCRIPTION:Air Barrier Embodied Carbon: A Critical Review\nThe session will start with a review of embodied carbon impacts applied to air barriers. This will include a comparison of published air barrier embodied carbon values\, varying assessment methodologies\, and their limitations. A recommended approach of evaluating embodied carbon impacts based on clear field and linear/point impacts similar to modern thermal performance analysis will be presented. The impacts of this approach will be illustrated using example building envelope assemblies. A number of common project air barrier considerations will be discussed including: the use of membranes under exterior spray foam applications\, the use of liquid applied air barriers on masonry when applying interior fibrous insulation\, and the use of loose sheet vs liquid applied or self-adhered air barriers. This session will be of interest to a range of participants: manufacturer’s will be interested in the review of environmental product declarations (EPDs) and how it may affect their systems; professionals will be interested in the insights and approaches offered and application to their practices in selecting systems and reporting embodied carbon impacts. The session be a great targeted introduction for contractors and others in the industry with an interest in embodied carbon applications to their field of work. \nLearning Objectives: \n\nIdentify the embodied carbon impact stage for air barrier\n Determine Clear Field vs Linear Impacts\nIllustrate the impact of air barrier on the embodied carbon of building envelope assemblies\nIdentify the impacts of common air barrier strategy selections\n\nRegister Now \nDr. Randy Van Straaten\, PhD\, P.Eng\, President\, Building Science Specialist\, Building Enclosure Labs\, Inc \nDr. Randy Van Straaten is the President and a Building Science Specialist at Building Enclosure Labs Inc. (BELi) in London\, Ontario. Previously\, Randy worked at RDH Building Science\, where he managed their life cycle analysis services. Randy recently completed a life cycle assessment study for BC Housing and has been lecturing on sustainability\, with a focus on operating and embodied carbon of building envelopes. He recently taught Building Science for Retrofits at George Brown College and Building Performance at Toronto Metropolitan University. URL:https://airbarrier.org/event/air-barrier-embodied-carbon-a-critical-review-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/11/EmbodiedCarbon_01-22-WebsiteSlide.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260128T110000 DTEND;TZID=America/Detroit:20260128T120000 DTSTAMP:20260409T172703 CREATED:20250918T154523Z LAST-MODIFIED:20250918T154523Z UID:990000175-1769598000-1769601600@airbarrier.org SUMMARY:ABAA Contractor Webinar: Mock Ups - The "Crash Test Dummy" for Building Enclosure DESCRIPTION:This presentation will review why enclosures are critical for energy efficiency\, sustainability and durability\, and explain how every building is unique.  We will then review and discuss the advantages/disadvantages of the various types of mock ups\, using examples from actual projects\, along with discussing various industry performance tests and standards typically performed on Functional or tested mock ups. \nThe last part of the presentation will review and provide ideas on how to take the Lessons Learned from the mock and use that information as an on-site training for the tradesmen whom will be installing the enclosure for that project. \nThis webinar is exclusive to the ABAA contractor members.  Please reach out to lhardman@airbarrier.org to register. URL:https://airbarrier.org/event/abaa-contractor-webinar-mock-ups-the-crash-test-dummy-for-building-enclosure/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/04/Contractor-Webinar-1-scaled.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260129T130000 DTEND;TZID=America/Detroit:20260129T143000 DTSTAMP:20260409T172703 CREATED:20251124T230242Z LAST-MODIFIED:20260121T194011Z UID:990000236-1769691600-1769697000@airbarrier.org SUMMARY:Dispelling the Myths about Building Enclosure Warranties 1.5 CEU/HSW DESCRIPTION:Dispelling the Myths about Building Enclosure Warranties\nBuilding Envelope System Warranties are becoming more sought after and bring some real value to a building owner – they help manage risk and obtain peace of mind. What constitutes a building enclosure system warranty? Can such a warranty be attained under one umbrella of coverage? Our industry understands how critical it is to ensure building enclosure protection from water\, air\, and thermal intrusion\, at every level\, and at every transition\, but is our industry ready for shift in practices to make this a reality for building owners? In a world aiming to minimize financial exposure\, system warranties are a good option. But are they really that simple to specify and implement? Join us to learn more about building enclosure system warranties\, the value they bring\, what they are\, how to specify them\, and what to look out for during the build process. \nLearning Objectives: \n\n Explain the scale and causes of building enclosure failures as a billion-dollar annual issue and describe why performance specifications – defining performance\, functional\, and technical requirements – are essential to reducing these failures.\n Identify and interpret key contract terms\, conditions\, and warranties\, and analyze how they assign responsibilities among parties and outline remedies in cases of claims or breaches.\n Differentiate between full system warranties\, component warranties\, and workmanship warranties\, and evaluate how full building envelope warranties align with Building Code compliance and the performance expectations of components that are moderately difficult to access or replace.\nDistinguish the coverage terms of various whole building envelope warranties and apply this understanding to appropriately incorporate warranty requirements into project specifications\n\nRegister Now \nMelissa Payne\, BECxP\, CxA+BE\, CDT\, Owner\, Midwest Enclosure Consulting\, LLC \nMelissa I. Payne is the founder of Midwest Enclosure Consulting (est. 2022)\, providing third-party building enclosure consulting\, forensic investigations\, performance assessments\, and onsite inspections. She previously led Tremco CPG’s Enclosure System Solutions Team and administered the MyTEAM Leak-Free Warranty program\, and before that managed building enclosure commissioning and consulting services at Miller Engineering after serving as an Owner’s Representative for City Utilities of Springfield.With broad experience in building science\, commissioning\, construction observation\, and detail development across multiple building types\, Ms. Payne is known for improving collaboration and reducing risk in design and construction. A nationally recognized speaker\, she is an active member of SWMO-CSI\, ICC\, NIBS\, BEC-OR (Past Chair)\, BETEC\, ABAA\, and IIBEC\, and is a published author in Interface magazine. \n\nCorey Zussman\, AIA\, NCARB\, ALA\, CABS\, QA/QC Vice President\, AECOM Hunt \nAs a forensic architect registered in several states\, Corey Zussman has practiced in the construction industry for more than 30 years. He specializes in the building envelope\, restoration\, preservation\, life safety\, and interior finishes. While working on over 2000 projects\, Corey conducts constructability reviews\, pre-installation meetings\, comprehensive envelope meetings\, and construction observations. He has also become known for providing educational opportunities throughout the industry and has produced more than 200 “lessons learned” papers. Topics include building envelope and life safety concerns\, enabling Corey to proactively address issues during design review\, pre-construction\, and construction. In addition\, he has over 15 industry articles about building envelope\, life safety\, and interior topics. He is also a frequent presenter at local and national conferences and associations with over 60 AIA accredited presentations. \n\nAmy Baker\, AIA\, LEED AP\, Specifications Writer\, Amy Baker Architect \nAmy Baker is a Registered Architect and Specifications Consultant with over 20 years of experience in commercial construction. She specializes in the technical development of projects with a passion for enclosure detailing\, building science\, codes\, and specifications. Amy is pleased to serve on the Board of Directors for the Building Enclosure Council (BEC-GD)\, the Detroit Chapter of the Construction Specifications Institute (CSI)\, Specification Consultants in Independent Practice (SCIP)\, and the Air Barrier Association of America (ABAA). She is also on RIB SpecLink’s Product Innovation Advisory Board\, where she contributes ideas for improving the functionality of one of the leading spec writing platforms in North America. Amy holds two degrees from Lawrence Technological University\, where she has been recognized as the university’s 26th Distinguished Architecture Award Recipient. URL:https://airbarrier.org/event/dispelling-the-myths-about-building-enclosure-warranties-1-5-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/11/Dispelling-the-Myths_01_29_26-WebsiteSlide.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260205T130000 DTEND;TZID=America/Detroit:20260205T140000 DTSTAMP:20260409T172703 CREATED:20251201T200454Z LAST-MODIFIED:20260202T170613Z UID:990000238-1770296400-1770300000@airbarrier.org SUMMARY:Taking the Air (Barrier) Out of ASHRAE 90.1 - with a Taste of MN Hotdish 1.0 CEU/HSW DESCRIPTION:Taking the Air (Barrier) Out of ASHRAE 90.1 – with a Taste of MN Hotdish\nThe 2021 International Energy Conservation Code (IECC) adopted ASHRAE Standard 90.1-2019\, which includes mandatory requirements for air barriers. This session will explore key topics such as Whole-Building Air Leakage and Continuous Air Barrier Design and Installation—both essential components of the compliance path. Our speaker\, Pam Jergenson from Minnesota\, will guide attendees on the pathway through the air barrier provisions in ASHRAE 90.1-2019 and highlight Minnesota-specific amendments that may resemble your local code. And since it’s at the lunch hour\, we’ll serve up those code insights with a side of cozy Minnesota hotdish flavor! \nLearning Objectives: \n\nKnow the starting point and path through ASHRAE Standard 90.1-2019 for air barrier materials and systems during the design and construction phases.\n Understand specific Minnesota amendments to the air barrier part of the standard\, their impact\, and what could be in your code.\n Know Section 5\, Building Envelope; specifically\, the Compliance Paths\, Mandatory Provisions\, Submittals\, Products\, and Inspection and Verification for air barriers.\n Analyze 5.4.3.1.1\, Whole-Building Air Leakage\, describing the Exceptions and the Minnesota amendment to the Exceptions that may be similar to your region.\n\nRegister Now \nPamela Jergenson\, FCSI\, CDT\, CCS\, CCCA\, BECxP\, CxA+BE\, CABS\, Technical Director of Building Science Solutions\, Intertek \nMs. Jergenson is a Technical Director of Building Science Solutions at Intertek. Pam is a Certified Construction Specifier (CCS) and Certified Construction Contract Administrator (CCCA) from Construction Specifications Institute (CSI)\, Building Enclosure Commissioning Process Provider (BECxP) and Accredited Commissioning Authority + Building Enclosure (CxA+BE) from University of Wisconsin-Madison\, ABAA Licensed Field Auditor and Certified Speaker with Air Barrier Association of America (ABAA)\, and Advanced Communicator Gold and Advanced Leader Bronze with Toastmasters International. She has over 35 years in construction with nearly 30 years in investigation\, survey\, design\, construction observation\, and construction contract administration of new and existing building enclosure projects; with expertise in exterior walls. URL:https://airbarrier.org/event/taking-the-air-barrier-out-of-ashrae-90-1-with-a-taste-of-mn-hotdish-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/12/Taking-the-Air-28Barrier-29-Out-of-ASHRAE-90.1_02-05_WebsiteSlide-1.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260212T130000 DTEND;TZID=America/Detroit:20260212T140000 DTSTAMP:20260409T172703 CREATED:20260120T172121Z LAST-MODIFIED:20260122T155027Z UID:990000275-1770901200-1770904800@airbarrier.org SUMMARY:Building Enclosures Durability Analysis with Hygrothermal Modeling 1.0 CEU/HSW DESCRIPTION:Building Enclosures Durability Analysis with Hygrothermal Modeling\nHygrothermal modeling\, the analysis of heat and moisture transport through building enclosure assemblies\, reveals many of the climate-specific building science secrets that are key to durable design of walls and roofs and other assemblies. Debunking rules of thumb and avoiding answers of “it depends” – data and analysis can reveal exactly how many inches of a certain insulation are required\, exactly what perm-rating will optimize an assembly\, and what kind of havoc a reservoir cladding system can create. Case studies will be shown that demonstrate when perm rating matters and when it does not\, the impact of roof membrane color and the risks of “cool roofing\,” and when HT (high-temp) rated membranes are actually required. \nLearning Objectives: \n\nLearn climate-specific design strategies for durable construction.\nLearn to avoid common mistakes that can lead to mold\, rot\, mildew\, corrosion and decay.\nUnderstand how hygrothermal modeling can be used in the design process to ensure durability.\nLearn how material properties (permeability\, heat capacity\, density\, conductivity\, and porosity) impact wall assemblies.\n\nRegister Now \nKeith Simon\, FAIA\, CPHC\, BECxP\, CxA+BE\, LEED AP\, CEI\, VP\, Design Phase Services\, Salas O’Brien \nAn expert in building enclosure technology\, Keith Simon addresses the critical and often unmet need for ensuring and improving building performance\, resilience\, and durability by guiding design teams\, educating future architects\, and facilitating interdisciplinary exchange. With more than 20 years of experience in the industry\, Keith is Vice President of Design Phase Services at Salas O’Brien. Additionally\, he serves as the Chair and Founder of the Austin Building Enclosure Council\, Vice Chair of the NIBS Building Enclosure Technology and Environment Council (BETEC)\, Scholarships Chair for the Society of Building Science Educators (SBSE) and has been adjunct faculty at the University of Texas School of Architecture since 2011. URL:https://airbarrier.org/event/building-enclosures-durability-analysis-with-hygrothermal-modeling-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2026/01/Hygrothermal-Modeling_02-12-WebsiteSlide.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260219T130000 DTEND;TZID=America/Detroit:20260219T140000 DTSTAMP:20260409T172703 CREATED:20251201T203159Z LAST-MODIFIED:20251231T174729Z UID:990000239-1771506000-1771509600@airbarrier.org SUMMARY:Electronic Leak Detection: Lessons Learned from ELD Testing & Continuous Monitoring 1.0 CEU/HSW DESCRIPTION:Electronic Leak Detection: Lessons Learned from ELD Testing & Continuous Monitoring\nThis one hour course will cover the lessons learned from multiple case studies regarding Electronic Leak Detection (ELD) quality control testing as part of new construction\, forensic testing in existing buildings with active leaks\, and continuous moisture monitoring for conventional roofing. Participants will learn about the principles outlined in the ASTM Standard Guide D7877 and ASTM Standard Practice D8231 and will be able to identify common causes for moisture intrusion. \nLearning Objectives: \n\nUnderstand the science\, capabilities and limitations of Electronic Leak Detection (ELD) as outlined in ASTM Guide D7877 & ASTM Practice D8231.\nRecognize common causes of failures found in numerous types of roofing and waterproofing membranes.\nIdentify potential future design and construction failures based on analyzed data from real time construction monitoring.\nDistinguish different applications for ELD testing and continuous moisture monitoring for risk mitigation and loss control.\n\nRegister Now \nShaun Katz\, CSI\, ASTM Member\, Product Line Manager\, Detec Systems \nShaun has over 20 years of experience in customer service and business administration. He has assisted facility/property managers and building owners\, contractors\, architects\, engineers\, consultants\, and manufacturers with forensic leak investigation\, as well as leak detection in new construction. He has performed ELD product demos and presentations throughout the world\, and won the 2020 Presenter of the Year award from the Chicago Chapter of IIBEC. His goal is to provide a basic understanding of Electronic Leak Detection and to assist all parties with ensuring valid and conclusive ELD. He is an active member of CSI and IIBEC. URL:https://airbarrier.org/event/electronic-leak-detection-lessons-learned-from-eld-testing-continuous-monitoring-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/12/Electronic-Leak-Detection_02-19_WebsiteSlide.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260225T110000 DTEND;TZID=America/Detroit:20260225T120000 DTSTAMP:20260409T172703 CREATED:20260108T145950Z LAST-MODIFIED:20260108T145950Z UID:990000269-1772017200-1772020800@airbarrier.org SUMMARY:ABAA Contractor Webinar: Air Barrier Installation and Quality Control Fundamentals DESCRIPTION:Join us for an informative presentation that emphasizes the importance of proper air barrier application in enhancing building performance.  Properly installed air barriers are critical in preventing air leakage\, which can lead to energy inefficiencies\, moisture issues\, and compromised indoor air quality. \nWe will delve into best practices for air barrier application\, highlighting the techniques that ensure continuity and effectiveness.  Attendees will learn about common challenges faced during installation and the vital role of quality control in maintaining the integrity of the air barrier system. \nThrough real-world project photo’s\, we’ll illustrate key application requirements for a variety of air barrier materials and exactly what to look for when performing quality control and site-testing. \nThis webinar is exclusive to the ABAA contractor members.  Please reach out to lhardman@airbarrier.org to register. URL:https://airbarrier.org/event/abaa-contractor-webinar-air-barrier-installation-and-quality-control-fundamentals/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/04/Contractor-Webinar-1-scaled.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260226T130000 DTEND;TZID=America/Detroit:20260226T140000 DTSTAMP:20260409T172703 CREATED:20251201T215810Z LAST-MODIFIED:20251231T174725Z UID:990000240-1772110800-1772114400@airbarrier.org SUMMARY:Prefabricated Exterior Wall Assemblies: Herding Cats in Hard Hats 1.0 CEU/HSW DESCRIPTION:Prefabricated Exterior Wall Assemblies: Herding Cats in Hard Hats\nPrefabrication of exterior wall assemblies has been explored since the 1920s and 1930s\, so the concept of their use is nothing new to the built environment. Today\, the construction industry’s focus is ensuring continuity of air\, water\, and thermal barriers—regardless of whether wall assemblies are built in the field or in a shop. Prefabricated exterior wall systems are designed to meet these requirements. This presentation will introduce perspectives from both a General Contractor involved in delegated design and a building enclosure consultant who reviews design\, fabrication\, and installation. Case studies will highlight code and industry inspection requirements\, review processes\, and lessons learned in coordinating prefabricated assemblies with other trades. Presenters will include Colton Howard with Terracon supporting Kayla Maines\, and we plan to bring in a prefabrication manufacturer to share their viewpoint. \nLearning Objectives: \n\n Describe the history and different types of prefabricated exterior wall panels.\n Contracting and coordinating the delegated design process with the applicable trade partners. Turn-Key\, Means & Methods\, and who owns the details?\n Review applicable codes and standards and methods for testing and inspecting these assemblies.\nDemonstrate the process of designing and construction of the prefabricated exterior wall assembly and how it incorporates the air\, thermal and water barriers within it.\n\nRegister Now \nKayla Maines\, AIA\, Senior Architect\, Terracon Consultants\, Inc\, \nKayla Maines joined Austin Terracon-Facilities in May of 2018. She is a Registered Architect in the state of Texas and Oklahoma\, Legacy LEED AP\, and Building Enclosure Commissioning Provider (BECxP) and a Commissioning Authority +Building Enclosure (CxA+BE) She has 17 years of experience that includes managing projects from Schematic Design through Construction Administration\, multidiscipline coordination\, peer reviews\, design assistance\, building assessments\, reviews submittals and shop drawings\, performs field observations and building enclosure testing\, historic preservation\, and building enclosure commissioning. Kayla was the 2020 Chair of the Austin Building Enclosure Council (BEC: Austin) and currently serves as a board member for BEC: Austin. She also serves as the Secretary of the Austin Construction Specification Institute (CSI). Mrs. Maines is a Terracon Subject Matter Expert (SME) for Building Enclosure Commissioning (BECx) and an Authorized Project Review (APR). \n\nTrevor Brown\, Regional Quality Director\, JE Dunn \nTrevor has been with JE Dunn Construction for 18 years and has dedicated 25 years to the Construction Quality profession. As an experienced Quality Director\, he has a proven track record in the construction industry\, showcasing his expertise in Building Envelope Design\, Constructability Reviews\, Mock-ups\, Construction Processes\, Pre-construction Activities\, Team Leadership\, Teaching/Training\, and Contract Management. Trevor is a highly skilled quality assurance professional\, holding Special Inspector Certifications focused on the International Building Code and other industry certifications specializing in building envelope systems\, testing\, and performance. He is a respected member of the building enclosure community. Acting as technical resource for building envelope design\, construction\, and code compliance. \n  \n\n \nColton Howard\, CEI\, Senior Facilities Professional\, Terracon Consultants\, Inc. \nColton is a Senior Facilities professional in Terracon’s Austin\, Texas office. He performs investigative testing and surveys of roofing and waterproofing components to identify deterioration and probable sources of water infiltration\, generates reports of observations and findings with recommendations and cost estimates\, and design repairs and renovations for building envelopes. Colton also oversees the different ASTM and AAMA standard tests or specialized testing. Colton also performs peer reviews of drawings and specifications and provides bid phase project management and construction phase project management services. \nColton has managed and overseen all phases of new and existing construction projects; commercial\, remedial\, residential structures\, schools\, historic rehabilitation\, observation\, reporting\, and forensic investigation and installation of roof and exterior waterproofing and wall systems. He has also performed design surveys\, peer reviews\, bidding and award\, construction administration\, observation and reporting\, and close-out documents in accordance with the RCI Manual of Practice. Colton also consults with architects and engineers recommending materials\, applications\, and design support\, and trains new personnel. URL:https://airbarrier.org/event/prefabricated-exterior-wall-assemblies-herding-cats-in-hard-hats-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/12/Prefabricated-Exterior-Wall-Assemblies_02-26_WebsiteSlide.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260305T130000 DTEND;TZID=America/Detroit:20260305T140000 DTSTAMP:20260409T172703 CREATED:20260122T221338Z LAST-MODIFIED:20260212T070445Z UID:990000277-1772715600-1772719200@airbarrier.org SUMMARY:Deciphering the Complexity of Adhered Veneer Wall Systems 1.0 CEU/HSW DESCRIPTION:Deciphering the Complexity of Adhered Veneer Wall Systems\nAdhered veneer cladding systems have gained popularity in the past decade with increased use in all climates across the county. Today this type of construction is not only seen on high-end residential\, but a common facade element on educational institutions\, hospitals\, airports and other commercial type buildings. While adhered veneer wall system have garnered the derogatory “lick and stick” label and are historically seen as economical\, value engineering options\, these systems have evolved significantly\, as well as the codes and standards used to design and construct them. With the increased complexity of adhered veneer systems\, deciphering the multiple building codes\, standards\, industry guidelines\, and manufacturer’s installation instructions can be challenging. Drawing on WJE’s extensive experience investigating failures of these systems\, this presentation will highlight code-compliance pathways\, key resources available for design and construction\, and general strategies to achieve a successful adhered veneer installation; inclusive of field testing and evaluation strategies. \nLearning Objectives: \n\nList the design requirements between prescriptive design versus engineered design for adhered veneer systems\nIdentify industry guides and standards (i.e.\, ASTM/ANSI) related to adhered veneer products and installation of adhered veneers.\nDescribe at least three of the most common failure mechanisms of adhered veneer systems.\nSummarize key quality control steps to consider during construction that can lead to a successful installation.\n\nRegister Now \nRenae Kwon\, Register Architect (IL\, WI\, AZ\, IN)\, Associate Principal\, Wiss\, Janney\, Elstner Associates\, Inc \nRenae Kwon is an Associate Principal with the interdisciplinary engineering\, architecture\, and material science consulting firm of Wiss\, Janney\, Elstner Associates Inc. Ms. Kwon is a licensed architect\, with experience in repair and rehabilitation of various types of facades and building envelopes as well as design peer review of building enclosure for new construction. Her focus of materials includes masonry\, stone and windows of both contemporary and historical structures. URL:https://airbarrier.org/event/deciphering-the-complexity-of-adhered-veneer-wall-systems-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2026/01/Deciphering-the-Complexity_03_05_26-WebsiteSlide.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260312T130000 DTEND;TZID=America/Detroit:20260312T140000 DTSTAMP:20260409T172703 CREATED:20260205T160116Z LAST-MODIFIED:20260213T230030Z UID:990000298-1773320400-1773324000@airbarrier.org SUMMARY:Elevating Enclosure Performance: Optimizing Continuous Insulation for Thermal Efficiency\, Durability\, and Safety 1.0 CEU/HSW DESCRIPTION:Elevating Enclosure Performance: Optimizing Continuous Insulation for Thermal Efficiency\, Durability\, and Safety\nThis webinar explores how strategic continuous insulation (CI) choices can alleviate pressures on building enclosures and elevate building envelope performance\, sustainability\, durability\, and life safety. Attendees will gain insights into NFPA 285 compliance\, the role of CI in rainscreen systems\, and key considerations behind insulation material selection. The course highlights key attributes for comparing insulation types—such as R-value\, thickness\, installation requirements\, and environmental impact—and suggests design opportunities using higher-performance insulation products. Through real-world assemblies and best practices\, participants will learn how to simplify insulation choices across multiple applications to meet evolving codes\, optimize wall assemblies\, reduce thermal bridging\, and even reclaim interior square footage. Discover how doing more with less supports design efficiency and construction practicality. \nLearning Objectives: \n\nIdentify how insulation selection impacts NFPA 285 compliance and understand how different assemblies perform with various continuous insulation materials under varying environmental pressures.\nEvaluate sustainability attributes\, installation efficiencies\, and design flexibility of continuous insulation types to maximize thermal performance and minimize installation complexity.\n Explore rainscreen applications and determine critical design and installation considerations for effectively integrating continuous insulation across varied enclosure types.\nExamine how high R-value insulation can reduce wall thickness\, simplify attachment systems\, and reclaim usable space within building envelopes.\n\nRegister Now \nLance Williams\, Architectural Sales Manager\, Atlas Roofing \nLance Williams is an Architectural Sales Manager focused on how today’s enclosure choices shape tomorrow’s buildings. Drawing on more than 20 years in commercial walls and continuous insulation\, he brings a long-view perspective on performance\, risk\, and carbon grounded in building science and real-world application realities. He’s known for framing complex envelope decisions in ways that resonate with owners\, designers\, and builders alike. \n  URL:https://airbarrier.org/event/elevating-enclosure-performance-optimizing-continuous-insulation-for-thermal-efficiency-durability-and-safety-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2026/02/ELEVAT1.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260319T130000 DTEND;TZID=America/Detroit:20260319T140000 DTSTAMP:20260409T172703 CREATED:20260126T193703Z LAST-MODIFIED:20260213T230332Z UID:990000284-1773925200-1773928800@airbarrier.org SUMMARY:Connecting the Dots: Air Barrier Connections 1.0 CEU/HSW DESCRIPTION: Connecting the Dots: Air Barrier Connections\nA chain is only as strong as its weakest link\, and this principle is equally applicable to air barriers. For an air barrier to function effectively\, it must be continuous. This is why the design process is often described by the adage\, “the pencil must not leave the paper.” This program will focus on the critical transitions between materials and guide you through the key considerations you’ll encounter when designing an air barrier system. Proper control and management of air and water are essential for the creation of durable\, healthy buildings. \nLearning Objectives: \n\n Become aware of the compatibility issues between the building enclosure’s air barrier components\n Review and discuss the areas with the highest potential for air and water issues\n Demonstrate ways to reduce the risk of water and air infiltration at transitions\n Understand how the air barrier components transition\n\nRegister Now \nMeagan Elfert\, CDT\, MBA\, Vice President\, York Flashings \nWith over a decade of dedicated service at York Flashings\, Meagan Elfert\, CDT\, MBA\, CBS currently serves as Vice President\, bringing strategic leadership and a results-driven approach to York. She manages York’s sales team across all regions of the USA\, ensuring that York remains a leader in the building products industry and reinforcing York’s reputation for quality and innovation. Meagan gives presentations on flashing and transition compatibility\, sustainability\, and performance to the AEC community across the country. She also provides educational sessions for contractors and performs job site visits to bring installers the latest technology and best flashing practices. URL:https://airbarrier.org/event/connecting-the-dots-air-barrier-connections-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2026/01/Connecting-the-Dots_03_19_26-WebsiteSlide.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260325T110000 DTEND;TZID=America/Detroit:20260325T120000 DTSTAMP:20260409T172703 CREATED:20250918T154620Z LAST-MODIFIED:20250918T154620Z UID:990000174-1774436400-1774440000@airbarrier.org SUMMARY:ABAA Contractor Webinar: Flashings 101 DESCRIPTION:This presentation will cover a detailed explanation of various types of flashings used in buildings\, including the challenges and solutions facing through wall flashings.  It will include a thorough description of the characteristics of several types of membranes\, emphasize the importance of compatibility\, and review proper installation techniques. \nLearning objectives \n\nDefine the attributes of a variety of flashing materials and best practices for installation\nUnderstand the compatibility between flashings and other wall components\nUnderstand how to design a resilient and durable flashing system that will minimize lifecycle costs\nExplain the performance criteria used to specify through wall flashings and transition membranes\n\nThis webinar is exclusive to the ABAA contractor members.  Please reach out to lhardman@airbarrier.org to register. URL:https://airbarrier.org/event/abaa-contractor-webinar-flashings-101/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/04/Contractor-Webinar-1-scaled.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260326T130000 DTEND;TZID=America/Detroit:20260326T140000 DTSTAMP:20260409T172703 CREATED:20260209T170337Z LAST-MODIFIED:20260304T181953Z UID:990000300-1774530000-1774533600@airbarrier.org SUMMARY:Above-Grade to Below-Grade Continuity: Applications\, Performance\, and Details 1.0 CEU/HSW DESCRIPTION: Above-Grade to Below-Grade Continuity: Applications\, Performance\, and Details\nIn the world of high-performance building enclosures\, the transition from above-grade wall systems to below-grade waterproofing continuity requires more than just high-quality products; it demands a sophisticated understanding of how systems interact across disparate assemblies. This technical webinar dives deep into the “gap” that often exists between the architectural facade and the foundation. We will explore the fundamental criteria for whole-building airtightness and define the specific challenges of various enclosure types\, occupancies\, and design criteria. Participants will gain a comprehensive overview of modern waterproofing technologies\, comparing liquid-applied\, self-adhered\, and sheet membranes. The session will contrast vertical and horizontal applications\, as well as the unique detailing requirements for pre-applied vs. post-applied systems. Through a series of detailed transition scenarios\, including above-grade walls to below-grade footings and horizontal plaza waterproofing. Beyond the technical drawings\, we will discuss the “human” side of building science: specifying for success. We will cover how to eliminate scope gaps and foster essential coordination between designers\, manufacturers\, and contractors to ensure a seamless\, high-performance building enclosure. \nLearning Objectives: \n\nAnalyze the critical role of whole-building enclosure continuity for building performance.\nIdentify appropriate waterproofing technologies for various above- and below-grade scenarios.\nApply robust detailing strategies for transitions between above-grade and below-grade systems\nDevelop clear specifications that facilitate coordination and eliminate technical gaps.\n\nRegister Now \nBenjamin Meyer\, AIA\, NCARB\, LEED AP\, Building Enclosure Business Director\, Siplast \nBenjamin Meyer is the Building Enclosure Business Director with Siplast. Previous experience includes: enclosure consultant principal\, technical management for enclosure products\, architecture\, real-estate development and construction management. Serves as ASHRAE 90.1 Envelope Chair and Full Voting Member\, Director of ABAA Standards Institute\, and past LEED Technical Committee Member. \n  \n  \n\nHerman Lopez\, BE Business Development Manager\, Siplast \nHerman Lopez is the Building Enclosure Sales Manager for Siplast. His previous experience includes National Commercial and Multifamily Account Manager for DuPont Building Performance Solutions and Director of Specifications for Tamlyn Products. Herman has over 25 years of experience selling building enclosure products and other construction-related materials used in the residential\, multi-family\, and commercial construction industries. URL:https://airbarrier.org/event/above-grade-to-below-grade-continuity-applications-performance-and-details-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2026/02/Above-Grade_03_26_26-WebsiteSlide.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260402T130000 DTEND;TZID=America/Detroit:20260402T140000 DTSTAMP:20260409T172704 CREATED:20260205T163920Z LAST-MODIFIED:20260325T152102Z UID:990000299-1775134800-1775138400@airbarrier.org SUMMARY:Warmer\, Wetter and Windier: Future Proofing Your Building Enclosure for Extreme Weather 1.0 CEU/HSW DESCRIPTION:Warmer\, Wetter and Windier: Future Proofing Your Building Enclosure for Extreme Weather\nBuilding enclosure design has always been driven in part by the ability to moderate the outdoor environmental conditions and maintain an operational indoor environment. The demand on building enclosures is evolving rapidly as changing climatic conditions require the design to mitigate more intense weather events. Climate variables such as increased rainfall\, rising or falling temperatures\, more extreme winds\, or more frequent intense storms can impact building enclosure design in different ways and require specific design strategies to reliably perform during extreme weather. Incorporating resiliency measures can help ensure buildings maintain their functional use and prevent losses during utility outages. \nThis presentation will begin with an overview of climate forecasting and adapting the project requirements to the future needs of various building types. The discussion will focus on the implementation of specific construction approaches from schematic design through construction and integration. Each approach will be considered with respect to reducing operational energy use through strategies such as increased insulation\, increased air tightness\, and optimal daylight design. We will investigate enclosure assemblies that may have performed adequately in the past but in a changing climate no longer provide adequate control. We will investigate building enclosure assembly selection to prioritize increased resiliency and durability\, including redundant passive systems. Reuse and adaptation of the existing building stock will be investigated. Finally\, the design approach must consider the ability to maintain comfortable or operable interior conditions during catastrophic events. \nLearning Objectives: \n\nIdentify changing climatic conditions that influence enclosure design such as increased wetting\, changing vapor diffusion\, shifting heating/cooling loads\, and increased wind loads.\nUnderstand how a changing climate can influence criteria for the overall building design such as wind funneling\, pedestrian comfort\, snow drifting\, stack effect\, flooding\, and ice/snow accumulation.\nPrioritize enclosure design strategies for durability\, reduced maintenance\, reuse\, and resiliency\nInvestigate how previously successful enclosure assemblies may no longer perform adequately due to climate change.\n\nRegister Now \nDavid Altenhofen\, FAIA\, Senior Technical Director\, RWDI \nDavid W. Altenhofen\, FAIA is a Senior Technical Director for the Building Enclosure Practice of RWDI\, a world-wide consultancy focusing on scientifically improving how buildings perform in their exact environment. David applies his 40 years of experience providing technical advice and quality assurance to a team of consultants bettering the building enclosure for a wide variety of projects. He has been involved in leadership roles in building enclosure performance for more than 20 years as a Principle within large architecture firms. David is active in the industry\, serving on many local and national committees including past National Chair of the Building Enclosure Council and the ABAA Board. David worked on the NIBS committee to publish Guideline 3 for Building Enclosure Commissioning\, authoring the chapter on Design Phase. He is past chair of the AIA Knowledge Community for Building Performance and was authored the shell chapter of the 11th edition of Architectural Graphic Standards. He has been widely published and presents frequently\, including at multiple national AIA conventions\, ABAA conferences\, local BECs \, universities and as a part of the RWDI educational symposiums. \n  URL:https://airbarrier.org/event/warmer-wetter-and-windier-future-proofing-your-building-enclosure-for-extreme-weather-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2026/02/Warmer-2C-Wetter_04_02_26-WebsiteSlide.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260409T130000 DTEND;TZID=America/Detroit:20260409T140000 DTSTAMP:20260409T172704 CREATED:20260204T230125Z LAST-MODIFIED:20260406T172935Z UID:990000297-1775739600-1775743200@airbarrier.org SUMMARY:Whole Building Air Tightness Tests: Building Preparation and Sampling 1.0 CEU/HSW DESCRIPTION:Whole Building Air Tightness Tests: Building Preparation and Sampling\nAll measurement tests inherently have error associated with the testing procedures\, and whole building airtightness is no exception. Whole building airtightness testing is typically performed on construction sites\, for buildings of various size and shape\, sometimes still in various stages of construction. Different techniques are often used to prepare buildings for the test. This includes methods for temporary sealing of intentional openings. Currently\, the degree of error associated with different techniques is unknown. This presentation will review different techniques for preparing and testing large scale buildings\, review the results of over 200 large scale whole building airtightness tests\, and look at the comparative results from different methods of building preparation to assess the potential error associated with different building preparation techniques. \nLearning Objectives: \n\nUnderstand the different methods of temporary sealing and building preparations required before testing\nDescribe the relative effectiveness of different building preparation methods\n Understand the function of a whole building air barrier test\nPredict what methods of preparation will lead to tighter test results\n\nRegister Now \nBrad Carmichael\, PE\, BEMP\, CPHC\, Principal\, 4EA Building Science \nBrad has been consulting on building enclosures throughout North America for over a decade. Brad is passionate about good design and the role it can play in social and environmental stewardship. He believes that durable and efficient building enclosures are critical for a built environment that is low consumption and long lasting. Brad has consulted on a wide array of different project types and sectors\, including high rises\, healthcare facilities\, cultural institutions\, workspaces\, affordable housing\, and historic landmarks. \n  \n  \n\nAdam Neugebauer\, MS\, Building Science Thermographer. Building Science Specialist\, 4EA Building Science \nAdam has been working in the building science industry since 2007. In the late 2000s\, he was involved in rulemaking for the California Energy Code (Title 24\, Part 6) and promoting the adoption of emerging technologies in the single-family new construction market. While earning his master’s in Building Technology at MIT\, he conducted materials research into a cutting-edge granulated aerogel thermal insulation system. At 4EA\, Adam now focuses his attention on affordable housing construction projects along with co-managing all air barrier testing at 4EA. URL:https://airbarrier.org/event/whole-building-air-tightness-tests-building-preparation-and-sampling-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2026/02/Whole-Building_04_09_26-WebsiteSlide-1.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260416T130000 DTEND;TZID=America/Detroit:20260416T140000 DTSTAMP:20260409T172704 CREATED:20260204T222851Z LAST-MODIFIED:20260304T182511Z UID:990000296-1776344400-1776348000@airbarrier.org SUMMARY:Update on the Current Building and Energy Codes That Affect the Air Barrier Industry 1.0 CEU/HSW DESCRIPTION:Update on the Current Building and Energy Codes That Affect the Air Barrier Industry\nBuilding and energy efficiency codes can have huge impact on the Air Barrier Industry\, affecting the specification and installation of air and water-resistive barrier systems. Following the code change process is a daunting task and even apparently small changes can have a large impact. Building and Energy Codes are updated on a three-year cycle and we are at a transition period with the publication of ASHRAE 90.1-2025 and the finalization of the 2027 editions of both the International Building Code (IBC) and International Energy Efficiency Code (IECC). This presentation will have an overview of the revisions that were implemented over the past code cycle and some changes which will govern code development in the next cycle. Additionally the status of state and jurisdictional adoption will discussed. \nLearning Objectives: \n\nUnderstand the status of building and energy code development\nUnderstand changes to air barrier and water-resistive barrier requirements in the upcoming IBC-2027\n Understand changes to air barrier related provisions in ASHRAE-90.1-2025\nUnderstand the status and environment for energy code adoption by states and jurisdictions.\n\nRegister Now \nTheresa Weston\, PhD\, CPHC\, CAPS\, CGP\, President\, The Holt Weston Consultancy \nDr. Theresa Weston is a building science research professional specializing in the durability and energy efficiency of buildings. Theresa started The Holt Weston Consultancy in November 2020. Prior to starting her company\, Dr Weston was a DuPont Laureate with Dupont Safety and Construction. Dr. Weston is an inventor on four U. S. patents.\nTheresa received her Bachelor of Science degree in Chemical Engineering from the Massachusetts Institute of Technology\, and Masters and PhD degrees in Chemical Engineering\, both from the California Institute of Technology.\nDr. Weston is active in industry standard and code development at ASHRAE\, ASTM and ICC. Dr. Weston has been awarded the DuPont Lavoisier Medal for Lifetime Technical Achievement\, the ASHRAE Distinguished Service\, Exceptional Service and Residential Service Awards\, the Wagdy Anis Award from the Air Barrier Association of America\, and the E. George Stern Award of Excellence from ASTM Committee E06. \n  URL:https://airbarrier.org/event/update-on-the-current-building-and-energy-codes-that-affect-the-air-barrier-industry-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2026/02/04_16_26-WebsiteSlide.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260423T130000 DTEND;TZID=America/Detroit:20260423T140000 DTSTAMP:20260409T172704 CREATED:20260213T205749Z LAST-MODIFIED:20260304T182955Z UID:990000304-1776949200-1776952800@airbarrier.org SUMMARY:The Building Science Aspects of Enclosure Detailing and Tie-Ins 1.0 CEU/HSW DESCRIPTION:The Building Science Aspects of Enclosure Detailing and Tie-Ins\nThe building enclosure is made up of many material types\, with the predominant need of protecting the building from water infiltration. In addition\, materials and tie-ins are critical to control air flow\, understand thermal bridging and risks of surface condensation\, and the control and flow of moisture by vapor diffusion. Sequencing of the details and tie-ins also have to consider sequencing by the trades\, material compatibility\, and durability\, including impacts of seasonal cycling. \nThis talk will focus on looking at the full building science considerations of detailing\, including materials that play one or more role as a control layer for heat\, air and moisture. The speaker will also discuss constructability and trade sequencing considerations. These are critical things to understand in designing and configuring details\, in addition to how they are presented in design drawing and shop drawing sets. This includes understanding how to integrate manufacturer standard details at interfaces such as roof to wall between roofing and wall air and water barriers and cladding. \nLearning Objectives: \n\nGain building science knowledge in configurations of details and what elements are controlling which types of flow paths for heat\, air and moisture.\nHave a deeper understanding of detail sequencing considering material compatibility\, as well as sequencing of the trades.\n Gain knowledge in layering for durability\, while also examining the build up of layers and thicknesses against construction constraints.\nBe able to describe and detail layering and sequencing critical to understand in design drawings and shop drawings for building enclosure systems.\n\nRegister Now \nPaul Totten\, PE\, LEED AP\, Senior Vice President\, WSP \nPaul E. Totten is a Senior Vice President at WSP and leads the Building Enclosures Division. He has over 28 years of experience in the fields of structural engineering\, building enclosure design and commissioning\, and building science. He has concentrated his expertise on the evaluation and analysis of heat\, air\, and moisture transfer\, and the cumulative effect these elements have on building components and building operation. \n  URL:https://airbarrier.org/event/the-building-science-aspects-of-enclosure-detailing-and-tie-ins-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2026/02/TheBuildingScience_04_23_26-WebsiteSlide.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260429T110000 DTEND;TZID=America/Detroit:20260429T120000 DTSTAMP:20260409T172704 CREATED:20260318T111644Z LAST-MODIFIED:20260318T122245Z UID:990000336-1777460400-1777464000@airbarrier.org SUMMARY:ABAA Contractor Webinar: Pre-and Post Installed Balconies and Canopies Open Forum DESCRIPTION:Adam Ugliuzza\, Partner of the Building Enclosures Group for Sustainable Building Partners\, will be hosting an open forum\, focusing on pre-and post installed balconies and canopy details in real-world applications. Send project-specific issues with an example picture or detail to lhardman@airbarrier.org (redact sensitive information). The webinar will be interactive\, and solutions will be provided on the call. \nDiscussion will include\, but is not limited to: \n\nConnections under the balconies\, where structural framing supports come through the AVB\nBalcony deck to wall connections\nConnections to balcony doors\, proper flashing and heights\nCanopies installed post AVB with connections through the facade\nPre-Fabricated balconies and those connections vs traditional stick built\n\nThis webinar is exclusive to the ABAA contractor members.  Please reach out to lhardman@airbarrier.org to register. \n  URL:https://airbarrier.org/event/abaa-contractor-webinar-pre-and-post-installed-balconies-and-canopies-open-forum/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2025/04/Contractor-Webinar-1-scaled.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260430T130000 DTEND;TZID=America/Detroit:20260430T140000 DTSTAMP:20260409T172704 CREATED:20260213T214654Z LAST-MODIFIED:20260304T182949Z UID:990000305-1777554000-1777557600@airbarrier.org SUMMARY:Lessons Learned: Trades that Need to Include an AVB Discussion in their Specification & Preinstallation Meetings 1.0 CEU/HSW DESCRIPTION:Lessons Learned: Trades that Need to Include an AVB Discussion in their Specification & Preinstallation Meetings\nWhen designing a building envelope wall system\, specifying\, detailing\, and having a pre-installation discussion about the backup substrate and façade elements\, considering the water\, air\, vapor\, and insulation systems detailing\, is critical. This involves careful coordination with all façade trade elements\, consideration of construction and installation tolerances\, addressing the installation requirements for the substrate wall\, water and air resistive barriers\, insulation\, and façade support system\, and learning lessons from each installation. Each component must be thoroughly understood and specified within their respective specification sections to ensure comprehensive detailing. By understanding the necessary connections\, material compatibility\, tested systems\, and limitations of construction materials\, you can develop pre-installation conversation points within each building envelope and substrate meetings to proactively develop an advanced conversation about detailing\, grasping the construction requirements for each component and incorporating lessons learned will enhance future detailing and specifications will significantly improve the chances of project success. \nLearning Objectives: \n\nIdentify early structural design considerations needed to maintain air\, vapor\, water\, insulation\, and rainscreen systems in bid documents.\nIncorporate construction tolerances when detailing substrate walls and control layers for various façade systems.\nRecognize common substrate and façade wall systems and the detailing needed to coordinate drawings and specifications.\nApply lessons learned on continuity\, fastening\, membranes\, and system tolerances to improve coordination and guide pre-installation meetings.\n\nRegister Now \nCorey Zussman\, AIA\, NCARB\, ALA (IL\, IN\, WI)\, RBEC\, RRC\, REWC\, RWC\, RRO\, CABS\, CCQM\, CDT\, CQM\, CxA+BE\, BECxP\, LEED AP BD+C\, Level II Thermographer\, QA/QC Vice President\, AECOM Hunt Construction \n As a forensic architect registered in several states\, Corey Zussman has practiced in the construction industry for over 30 years. He specializes in the building envelope\, restoration\, preservation\, life safety\, and interior finishes. While working on over 2000 projects\, Corey conducts constructability reviews\, pre-installation meetings\, comprehensive envelope meetings\, and construction observations. He has also become known for providing educational opportunities throughout the industry and has produced more than 200 “lessons learned” papers. Topics include building envelope and life safety concerns\, enabling Corey to proactively address issues during design review\, pre-construction\, and construction. In addition\, he has over 15 industry articles about building envelope and life safety topics. He is also a frequent presenter at local and national conferences and associations with over 50 AIA accredited presentations. \n  URL:https://airbarrier.org/event/lessons-learned-trades-that-need-to-include-an-avb-discussion-in-their-specification-preinstallation-meetings-1-0-ceu-hsw/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2026/02/Lessons-Learned_04_30_26-WebsiteSlide.png END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/Detroit:20260514T130000 DTEND;TZID=America/Detroit:20260514T140000 DTSTAMP:20260409T172704 CREATED:20260213T215306Z LAST-MODIFIED:20260320T141006Z UID:990000306-1778763600-1778767200@airbarrier.org SUMMARY:Sink or Swim: Effective Natatorium Envelope Design Thru Case Study 1.0 CEU/HSW DESCRIPTION:Sink or Swim: Effective Natatorium Envelope Design Thru Case Study\nParticipants will develop a comprehensive understanding of the potential risks involved in designing roof and wall assemblies over pools and other corrosive environments. The session will cover effective design strategies to mitigate moisture damage by managing air\, temperature\, and vapor control. Key roof assembly elements—such as metal decking\, fasteners\, air/vapor barriers\, and insulation—will be discussed in detail. Finally\, these principles will be applied in a case study\, covering the full project lifecycle from concept and design to application\, inspections\, and handover. \nLearning Objectives: \n\nExplain how moisture intrudes and affects roof/wall assemblies over pools and caustic environments.\nSummarize the typical materials of construction\, and advantages associated with material selection in roof and wall assemblies.\nIdentify the functional performance-based characteristics of a high-performance enclosure system.\nAnalyze various preferred natatorium roof/wall assembly details and applications in a case study.\n\nRegister Now \nQ. Jonnie Hasan\, M. Eng. (Sustainable Development)\, Professional Engineer (P.E. Structural)\, BECxP\, CxA+BE\, Director of Engineering\, IMETCO \nJonnie has more than 24 years of experience in commercial construction\, design-build\, and cladding industry. In his position\, Jonnie has various roles: including building envelope designer\, WUFI analyst\, manufacturing engineer\, sustainable smart building engineer\, and operations manager. Jonnie is also certified as a Building Envelope Commissioning Provider & Commissioning Authority designation by University of Wisconsin. Jonnie strives to guide clients to the most cost effective and efficient product application. Jonnie is a registered Professional Engineer with numerous patents related to building cladding system and design. \n  URL:https://airbarrier.org/event/sink-or-swim-effective-natatorium-envelope-design-thru-case-study-1-0-ceu-hsw-2/ CATEGORIES:CEU Webinars ATTACH;FMTTYPE=image/png:https://airbarrier.org/wp-content/uploads/2026/02/Sink-or-Swim_05_14_26-WebsiteSlide.png END:VEVENT END:VCALENDAR